From: <Tudor.Ambarus@microchip.com>
To: <herbert@gondor.apana.org.au>
Cc: <Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <linux-crypto@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <Tudor.Ambarus@microchip.com>
Subject: [PATCH 1/2] crypto: atmel-tdes - Set the IV after {en,de}crypt
Date: Fri, 15 Nov 2019 13:49:06 +0000 [thread overview]
Message-ID: <20191115134854.30190-1-tudor.ambarus@microchip.com> (raw)
From: Tudor Ambarus <tudor.ambarus@microchip.com>
The req->iv of the skcipher_request is expected to contain the
last ciphertext block when the {en,de}crypt operation is done.
In case of in-place decryption, copy the ciphertext in an
intermediate buffer before decryption.
This fixes the following tcrypt tests:
alg: skcipher: atmel-cbc-des encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
00000000: fe dc ba 98 76 54 32 10
alg: skcipher: atmel-cbc-tdes encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
00000000: 7d 33 88 93 0f 93 b2 42
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/crypto/atmel-tdes.c | 40 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/atmel-tdes.c b/drivers/crypto/atmel-tdes.c
index bb7c0a387c04..0c1f79b30fc1 100644
--- a/drivers/crypto/atmel-tdes.c
+++ b/drivers/crypto/atmel-tdes.c
@@ -81,6 +81,7 @@ struct atmel_tdes_ctx {
struct atmel_tdes_reqctx {
unsigned long mode;
+ u8 lastc[DES_BLOCK_SIZE];
};
struct atmel_tdes_dma {
@@ -572,6 +573,30 @@ static int atmel_tdes_crypt_start(struct atmel_tdes_dev *dd)
return err;
}
+static void
+atmel_tdes_set_iv_as_last_ciphertext_block(struct atmel_tdes_dev *dd)
+{
+ struct skcipher_request *req = dd->req;
+ struct atmel_tdes_reqctx *rctx = skcipher_request_ctx(req);
+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
+ unsigned int ivsize = crypto_skcipher_ivsize(skcipher);
+
+ if (req->cryptlen < ivsize)
+ return;
+
+ if (rctx->mode & TDES_FLAGS_ENCRYPT) {
+ scatterwalk_map_and_copy(req->iv, req->dst,
+ req->cryptlen - ivsize, ivsize, 0);
+ } else {
+ if (req->src == req->dst)
+ memcpy(req->iv, rctx->lastc, ivsize);
+ else
+ scatterwalk_map_and_copy(req->iv, req->src,
+ req->cryptlen - ivsize,
+ ivsize, 0);
+ }
+}
+
static void atmel_tdes_finish_req(struct atmel_tdes_dev *dd, int err)
{
struct skcipher_request *req = dd->req;
@@ -580,6 +605,8 @@ static void atmel_tdes_finish_req(struct atmel_tdes_dev *dd, int err)
dd->flags &= ~TDES_FLAGS_BUSY;
+ atmel_tdes_set_iv_as_last_ciphertext_block(dd);
+
req->base.complete(&req->base, err);
}
@@ -668,8 +695,8 @@ static int atmel_tdes_crypt_dma_stop(struct atmel_tdes_dev *dd)
static int atmel_tdes_crypt(struct skcipher_request *req, unsigned long mode)
{
- struct atmel_tdes_ctx *ctx = crypto_skcipher_ctx(
- crypto_skcipher_reqtfm(req));
+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
+ struct atmel_tdes_ctx *ctx = crypto_skcipher_ctx(skcipher);
struct atmel_tdes_reqctx *rctx = skcipher_request_ctx(req);
if (mode & TDES_FLAGS_CFB8) {
@@ -700,6 +727,15 @@ static int atmel_tdes_crypt(struct skcipher_request *req, unsigned long mode)
rctx->mode = mode;
+ if (!(mode & TDES_FLAGS_ENCRYPT) && req->src == req->dst) {
+ unsigned int ivsize = crypto_skcipher_ivsize(skcipher);
+
+ if (req->cryptlen >= ivsize)
+ scatterwalk_map_and_copy(rctx->lastc, req->src,
+ req->cryptlen - ivsize,
+ ivsize, 0);
+ }
+
return atmel_tdes_handle_queue(ctx->dd, req);
}
--
2.9.5
next reply other threads:[~2019-11-15 13:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-15 13:49 Tudor.Ambarus [this message]
2019-11-15 13:49 ` [PATCH 2/2] crypto: atmel-aes - Change data type for "lastc" buffer Tudor.Ambarus
2019-11-22 11:09 ` [PATCH 1/2] crypto: atmel-tdes - Set the IV after {en,de}crypt Herbert Xu
2019-11-27 16:56 ` Tudor.Ambarus
2019-11-28 2:33 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191115134854.30190-1-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®