* [PATCH -rcu v2 1/2] kcsan: Show full access type in report
2020-01-10 18:48 [PATCH -rcu v2 0/2] kcsan: Improvements to reporting Marco Elver
@ 2020-01-10 18:48 ` Marco Elver
2020-01-10 18:48 ` [PATCH -rcu v2 2/2] kcsan: Rate-limit reporting per data races Marco Elver
2020-01-11 5:17 ` [PATCH -rcu v2 0/2] kcsan: Improvements to reporting Paul E. McKenney
2 siblings, 0 replies; 4+ messages in thread
From: Marco Elver @ 2020-01-10 18:48 UTC (permalink / raw)
To: elver; +Cc: paulmck, andreyknvl, glider, dvyukov, kasan-dev, linux-kernel
This commit adds access-type information to KCSAN's reports as follows:
"read", "read (marked)", "write", and "write (marked)".
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
kernel/kcsan/core.c | 15 ++++++++-------
kernel/kcsan/kcsan.h | 2 +-
kernel/kcsan/report.c | 43 ++++++++++++++++++++++++++++---------------
3 files changed, 37 insertions(+), 23 deletions(-)
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
index 4d4ab5c5dc53..87bf857c8893 100644
--- a/kernel/kcsan/core.c
+++ b/kernel/kcsan/core.c
@@ -255,7 +255,7 @@ static inline unsigned int get_delay(void)
static noinline void kcsan_found_watchpoint(const volatile void *ptr,
size_t size,
- bool is_write,
+ int type,
atomic_long_t *watchpoint,
long encoded_watchpoint)
{
@@ -276,7 +276,7 @@ static noinline void kcsan_found_watchpoint(const volatile void *ptr,
flags = user_access_save();
if (consumed) {
- kcsan_report(ptr, size, is_write, true, raw_smp_processor_id(),
+ kcsan_report(ptr, size, type, true, raw_smp_processor_id(),
KCSAN_REPORT_CONSUMED_WATCHPOINT);
} else {
/*
@@ -292,8 +292,9 @@ static noinline void kcsan_found_watchpoint(const volatile void *ptr,
}
static noinline void
-kcsan_setup_watchpoint(const volatile void *ptr, size_t size, bool is_write)
+kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
{
+ const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
atomic_long_t *watchpoint;
union {
u8 _1;
@@ -415,13 +416,13 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, bool is_write)
* No need to increment 'data_races' counter, as the racing
* thread already did.
*/
- kcsan_report(ptr, size, is_write, size > 8 || value_change,
+ kcsan_report(ptr, size, type, size > 8 || value_change,
smp_processor_id(), KCSAN_REPORT_RACE_SIGNAL);
} else if (value_change) {
/* Inferring a race, since the value should not have changed. */
kcsan_counter_inc(KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN);
if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN))
- kcsan_report(ptr, size, is_write, true,
+ kcsan_report(ptr, size, type, true,
smp_processor_id(),
KCSAN_REPORT_RACE_UNKNOWN_ORIGIN);
}
@@ -455,10 +456,10 @@ static __always_inline void check_access(const volatile void *ptr, size_t size,
*/
if (unlikely(watchpoint != NULL))
- kcsan_found_watchpoint(ptr, size, is_write, watchpoint,
+ kcsan_found_watchpoint(ptr, size, type, watchpoint,
encoded_watchpoint);
else if (unlikely(should_watch(ptr, type)))
- kcsan_setup_watchpoint(ptr, size, is_write);
+ kcsan_setup_watchpoint(ptr, size, type);
}
/* === Public interface ===================================================== */
diff --git a/kernel/kcsan/kcsan.h b/kernel/kcsan/kcsan.h
index d3b9a96ac8a4..8492da45494b 100644
--- a/kernel/kcsan/kcsan.h
+++ b/kernel/kcsan/kcsan.h
@@ -103,7 +103,7 @@ enum kcsan_report_type {
/*
* Print a race report from thread that encountered the race.
*/
-extern void kcsan_report(const volatile void *ptr, size_t size, bool is_write,
+extern void kcsan_report(const volatile void *ptr, size_t size, int access_type,
bool value_change, int cpu_id, enum kcsan_report_type type);
#endif /* _KERNEL_KCSAN_KCSAN_H */
diff --git a/kernel/kcsan/report.c b/kernel/kcsan/report.c
index 0eea05a3135b..9f503ca2ff7a 100644
--- a/kernel/kcsan/report.c
+++ b/kernel/kcsan/report.c
@@ -24,7 +24,7 @@
static struct {
const volatile void *ptr;
size_t size;
- bool is_write;
+ int access_type;
int task_pid;
int cpu_id;
unsigned long stack_entries[NUM_STACK_ENTRIES];
@@ -41,8 +41,10 @@ static DEFINE_SPINLOCK(report_lock);
* Special rules to skip reporting.
*/
static bool
-skip_report(bool is_write, bool value_change, unsigned long top_frame)
+skip_report(int access_type, bool value_change, unsigned long top_frame)
{
+ const bool is_write = (access_type & KCSAN_ACCESS_WRITE) != 0;
+
if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY) && is_write &&
!value_change) {
/*
@@ -63,9 +65,20 @@ skip_report(bool is_write, bool value_change, unsigned long top_frame)
return kcsan_skip_report_debugfs(top_frame);
}
-static inline const char *get_access_type(bool is_write)
+static const char *get_access_type(int type)
{
- return is_write ? "write" : "read";
+ switch (type) {
+ case 0:
+ return "read";
+ case KCSAN_ACCESS_ATOMIC:
+ return "read (marked)";
+ case KCSAN_ACCESS_WRITE:
+ return "write";
+ case KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC:
+ return "write (marked)";
+ default:
+ BUG();
+ }
}
/* Return thread description: in task or interrupt. */
@@ -112,7 +125,7 @@ static int sym_strcmp(void *addr1, void *addr2)
/*
* Returns true if a report was generated, false otherwise.
*/
-static bool print_report(const volatile void *ptr, size_t size, bool is_write,
+static bool print_report(const volatile void *ptr, size_t size, int access_type,
bool value_change, int cpu_id,
enum kcsan_report_type type)
{
@@ -124,7 +137,7 @@ static bool print_report(const volatile void *ptr, size_t size, bool is_write,
/*
* Must check report filter rules before starting to print.
*/
- if (skip_report(is_write, true, stack_entries[skipnr]))
+ if (skip_report(access_type, true, stack_entries[skipnr]))
return false;
if (type == KCSAN_REPORT_RACE_SIGNAL) {
@@ -132,7 +145,7 @@ static bool print_report(const volatile void *ptr, size_t size, bool is_write,
other_info.num_stack_entries);
/* @value_change is only known for the other thread */
- if (skip_report(other_info.is_write, value_change,
+ if (skip_report(other_info.access_type, value_change,
other_info.stack_entries[other_skipnr]))
return false;
}
@@ -170,7 +183,7 @@ static bool print_report(const volatile void *ptr, size_t size, bool is_write,
switch (type) {
case KCSAN_REPORT_RACE_SIGNAL:
pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
- get_access_type(other_info.is_write), other_info.ptr,
+ get_access_type(other_info.access_type), other_info.ptr,
other_info.size, get_thread_desc(other_info.task_pid),
other_info.cpu_id);
@@ -181,14 +194,14 @@ static bool print_report(const volatile void *ptr, size_t size, bool is_write,
pr_err("\n");
pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",
- get_access_type(is_write), ptr, size,
+ get_access_type(access_type), ptr, size,
get_thread_desc(in_task() ? task_pid_nr(current) : -1),
cpu_id);
break;
case KCSAN_REPORT_RACE_UNKNOWN_ORIGIN:
pr_err("race at unknown origin, with %s to 0x%px of %zu bytes by %s on cpu %i:\n",
- get_access_type(is_write), ptr, size,
+ get_access_type(access_type), ptr, size,
get_thread_desc(in_task() ? task_pid_nr(current) : -1),
cpu_id);
break;
@@ -223,7 +236,7 @@ static void release_report(unsigned long *flags, enum kcsan_report_type type)
* required for the report type, simply acquires report_lock and returns true.
*/
static bool prepare_report(unsigned long *flags, const volatile void *ptr,
- size_t size, bool is_write, int cpu_id,
+ size_t size, int access_type, int cpu_id,
enum kcsan_report_type type)
{
if (type != KCSAN_REPORT_CONSUMED_WATCHPOINT &&
@@ -243,7 +256,7 @@ static bool prepare_report(unsigned long *flags, const volatile void *ptr,
other_info.ptr = ptr;
other_info.size = size;
- other_info.is_write = is_write;
+ other_info.access_type = access_type;
other_info.task_pid = in_task() ? task_pid_nr(current) : -1;
other_info.cpu_id = cpu_id;
other_info.num_stack_entries = stack_trace_save(other_info.stack_entries, NUM_STACK_ENTRIES, 1);
@@ -302,14 +315,14 @@ static bool prepare_report(unsigned long *flags, const volatile void *ptr,
goto retry;
}
-void kcsan_report(const volatile void *ptr, size_t size, bool is_write,
+void kcsan_report(const volatile void *ptr, size_t size, int access_type,
bool value_change, int cpu_id, enum kcsan_report_type type)
{
unsigned long flags = 0;
kcsan_disable_current();
- if (prepare_report(&flags, ptr, size, is_write, cpu_id, type)) {
- if (print_report(ptr, size, is_write, value_change, cpu_id, type) && panic_on_warn)
+ if (prepare_report(&flags, ptr, size, access_type, cpu_id, type)) {
+ if (print_report(ptr, size, access_type, value_change, cpu_id, type) && panic_on_warn)
panic("panic_on_warn set ...\n");
release_report(&flags, type);
--
2.25.0.rc1.283.g88dfdc4193-goog
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH -rcu v2 2/2] kcsan: Rate-limit reporting per data races
2020-01-10 18:48 [PATCH -rcu v2 0/2] kcsan: Improvements to reporting Marco Elver
2020-01-10 18:48 ` [PATCH -rcu v2 1/2] kcsan: Show full access type in report Marco Elver
@ 2020-01-10 18:48 ` Marco Elver
2020-01-11 5:17 ` [PATCH -rcu v2 0/2] kcsan: Improvements to reporting Paul E. McKenney
2 siblings, 0 replies; 4+ messages in thread
From: Marco Elver @ 2020-01-10 18:48 UTC (permalink / raw)
To: elver
Cc: paulmck, andreyknvl, glider, dvyukov, kasan-dev, linux-kernel, Qian Cai
KCSAN data-race reports can occur quite frequently, so much so as
to render the system useless. This commit therefore adds support for
time-based rate-limiting KCSAN reports, with the time interval specified
by a new KCSAN_REPORT_ONCE_IN_MS Kconfig option. The default is 3000
milliseconds, also known as three seconds.
Because KCSAN must detect data races in allocators and in other contexts
where use of allocation is ill-advised, a fixed-size array is used to
buffer reports during each reporting interval. To reduce the number of
reports lost due to array overflow, this commit stores only one instance
of duplicate reports, which has the benefit of further reducing KCSAN's
console output rate.
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
v2:
* Paul E. McKenney: commit message reword.
* Use jiffies instead of ktime -- we want to avoid calling into any
further complex functions, since KCSAN may also detect data races in
them, and as a result potentially leading to observing corrupt state
(e.g. here, observing corrupt ktime_t value).
---
kernel/kcsan/report.c | 110 ++++++++++++++++++++++++++++++++++++++----
lib/Kconfig.kcsan | 10 ++++
2 files changed, 110 insertions(+), 10 deletions(-)
diff --git a/kernel/kcsan/report.c b/kernel/kcsan/report.c
index 9f503ca2ff7a..b5b4feea49de 100644
--- a/kernel/kcsan/report.c
+++ b/kernel/kcsan/report.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/preempt.h>
#include <linux/printk.h>
@@ -31,12 +32,99 @@ static struct {
int num_stack_entries;
} other_info = { .ptr = NULL };
+/*
+ * Information about reported data races; used to rate limit reporting.
+ */
+struct report_time {
+ /*
+ * The last time the data race was reported.
+ */
+ unsigned long time;
+
+ /*
+ * The frames of the 2 threads; if only 1 thread is known, one frame
+ * will be 0.
+ */
+ unsigned long frame1;
+ unsigned long frame2;
+};
+
+/*
+ * Since we also want to be able to debug allocators with KCSAN, to avoid
+ * deadlock, report_times cannot be dynamically resized with krealloc in
+ * rate_limit_report.
+ *
+ * Therefore, we use a fixed-size array, which at most will occupy a page. This
+ * still adequately rate limits reports, assuming that a) number of unique data
+ * races is not excessive, and b) occurrence of unique data races within the
+ * same time window is limited.
+ */
+#define REPORT_TIMES_MAX (PAGE_SIZE / sizeof(struct report_time))
+#define REPORT_TIMES_SIZE \
+ (CONFIG_KCSAN_REPORT_ONCE_IN_MS > REPORT_TIMES_MAX ? \
+ REPORT_TIMES_MAX : \
+ CONFIG_KCSAN_REPORT_ONCE_IN_MS)
+static struct report_time report_times[REPORT_TIMES_SIZE];
+
/*
* This spinlock protects reporting and other_info, since other_info is usually
* required when reporting.
*/
static DEFINE_SPINLOCK(report_lock);
+/*
+ * Checks if the data race identified by thread frames frame1 and frame2 has
+ * been reported since (now - KCSAN_REPORT_ONCE_IN_MS).
+ */
+static bool rate_limit_report(unsigned long frame1, unsigned long frame2)
+{
+ struct report_time *use_entry = &report_times[0];
+ unsigned long invalid_before;
+ int i;
+
+ BUILD_BUG_ON(CONFIG_KCSAN_REPORT_ONCE_IN_MS != 0 && REPORT_TIMES_SIZE == 0);
+
+ if (CONFIG_KCSAN_REPORT_ONCE_IN_MS == 0)
+ return false;
+
+ invalid_before = jiffies - msecs_to_jiffies(CONFIG_KCSAN_REPORT_ONCE_IN_MS);
+
+ /* Check if a matching data race report exists. */
+ for (i = 0; i < REPORT_TIMES_SIZE; ++i) {
+ struct report_time *rt = &report_times[i];
+
+ /*
+ * Must always select an entry for use to store info as we
+ * cannot resize report_times; at the end of the scan, use_entry
+ * will be the oldest entry, which ideally also happened before
+ * KCSAN_REPORT_ONCE_IN_MS ago.
+ */
+ if (time_before(rt->time, use_entry->time))
+ use_entry = rt;
+
+ /*
+ * Initially, no need to check any further as this entry as well
+ * as following entries have never been used.
+ */
+ if (rt->time == 0)
+ break;
+
+ /* Check if entry expired. */
+ if (time_before(rt->time, invalid_before))
+ continue; /* before KCSAN_REPORT_ONCE_IN_MS ago */
+
+ /* Reported recently, check if data race matches. */
+ if ((rt->frame1 == frame1 && rt->frame2 == frame2) ||
+ (rt->frame1 == frame2 && rt->frame2 == frame1))
+ return true;
+ }
+
+ use_entry->time = jiffies;
+ use_entry->frame1 = frame1;
+ use_entry->frame2 = frame2;
+ return false;
+}
+
/*
* Special rules to skip reporting.
*/
@@ -132,7 +220,9 @@ static bool print_report(const volatile void *ptr, size_t size, int access_type,
unsigned long stack_entries[NUM_STACK_ENTRIES] = { 0 };
int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1);
int skipnr = get_stack_skipnr(stack_entries, num_stack_entries);
- int other_skipnr;
+ unsigned long this_frame = stack_entries[skipnr];
+ unsigned long other_frame = 0;
+ int other_skipnr = 0; /* silence uninit warnings */
/*
* Must check report filter rules before starting to print.
@@ -143,34 +233,34 @@ static bool print_report(const volatile void *ptr, size_t size, int access_type,
if (type == KCSAN_REPORT_RACE_SIGNAL) {
other_skipnr = get_stack_skipnr(other_info.stack_entries,
other_info.num_stack_entries);
+ other_frame = other_info.stack_entries[other_skipnr];
/* @value_change is only known for the other thread */
- if (skip_report(other_info.access_type, value_change,
- other_info.stack_entries[other_skipnr]))
+ if (skip_report(other_info.access_type, value_change, other_frame))
return false;
}
+ if (rate_limit_report(this_frame, other_frame))
+ return false;
+
/* Print report header. */
pr_err("==================================================================\n");
switch (type) {
case KCSAN_REPORT_RACE_SIGNAL: {
- void *this_fn = (void *)stack_entries[skipnr];
- void *other_fn = (void *)other_info.stack_entries[other_skipnr];
int cmp;
/*
* Order functions lexographically for consistent bug titles.
* Do not print offset of functions to keep title short.
*/
- cmp = sym_strcmp(other_fn, this_fn);
+ cmp = sym_strcmp((void *)other_frame, (void *)this_frame);
pr_err("BUG: KCSAN: data-race in %ps / %ps\n",
- cmp < 0 ? other_fn : this_fn,
- cmp < 0 ? this_fn : other_fn);
+ (void *)(cmp < 0 ? other_frame : this_frame),
+ (void *)(cmp < 0 ? this_frame : other_frame));
} break;
case KCSAN_REPORT_RACE_UNKNOWN_ORIGIN:
- pr_err("BUG: KCSAN: data-race in %pS\n",
- (void *)stack_entries[skipnr]);
+ pr_err("BUG: KCSAN: data-race in %pS\n", (void *)this_frame);
break;
default:
diff --git a/lib/Kconfig.kcsan b/lib/Kconfig.kcsan
index 3f78b1434375..3552990abcfe 100644
--- a/lib/Kconfig.kcsan
+++ b/lib/Kconfig.kcsan
@@ -81,6 +81,16 @@ config KCSAN_SKIP_WATCH_RANDOMIZE
KCSAN_WATCH_SKIP. If false, the chosen value is always
KCSAN_WATCH_SKIP.
+config KCSAN_REPORT_ONCE_IN_MS
+ int "Duration in milliseconds, in which any given data race is only reported once"
+ default 3000
+ help
+ Any given data race is only reported once in the defined time window.
+ Different data races may still generate reports within a duration
+ that is smaller than the duration defined here. This allows rate
+ limiting reporting to avoid flooding the console with reports.
+ Setting this to 0 disables rate limiting.
+
# Note that, while some of the below options could be turned into boot
# parameters, to optimize for the common use-case, we avoid this because: (a)
# it would impact performance (and we want to avoid static branch for all
--
2.25.0.rc1.283.g88dfdc4193-goog
^ permalink raw reply [flat|nested] 4+ messages in thread