[PATCH 1/2] tools/power/x86/intel-speed-select: Fix display for turbo-freq auto mode

[PATCH 1/2] tools/power/x86/intel-speed-select: Fix display for turbo-freq auto mode

[Srinivas Pandruvada]

When mailbox command for the turbo-freq enable fails, then don't display
result for auto-mode. When turbo-freq enable fails, there is no point
to set CPU priorities.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 tools/power/x86/intel-speed-select/isst-config.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c
index c74b776adc61..7893ad2c34ab 100644
--- a/tools/power/x86/intel-speed-select/isst-config.c
+++ b/tools/power/x86/intel-speed-select/isst-config.c
@@ -43,6 +43,7 @@ static int out_format_json;
 static int cmd_help;
 static int force_online_offline;
 static int auto_mode;
+static int fact_enable_fail;
 
 /* clos related */
 static int current_clos = -1;
@@ -1581,6 +1582,8 @@ static void set_fact_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 disp_results:
 	if (status) {
 		isst_display_result(cpu, outf, "turbo-freq", "enable", ret);
+		if (ret)
+			fact_enable_fail = ret;
 	} else {
 		/* Since we modified TRL during Fact enable, restore it */
 		isst_set_trl_from_current_tdp(cpu, fact_trl);
@@ -1622,7 +1625,7 @@ static void set_fact_enable(int arg)
 					       NULL, &enable);
 	isst_ctdp_display_information_end(outf);
 
-	if (enable && auto_mode) {
+	if (!fact_enable_fail && enable && auto_mode) {
 		/*
 		 * When we adjust CLOS param, we have to set for siblings also.
 		 * So for the each user specified CPU, also add the sibling
-- 
2.24.1

[PATCH 2/2] tools/power/x86/intel-speed-select: Avoid duplicate names for json parsing

[Srinivas Pandruvada]

For the command
"intel-speed-select perf-profile info":

There are two instances of “speed-select-turbo-freq” underneath
“perf-profile-level-0” for each package. When we load the output into
python with json.load(), the second instance overwrites the first.

Result is that we can only access:
"speed-select-turbo-freq": {
            "bucket-0": {
              "high-priority-cores-count": "2",
              "high-priority-max-frequency(MHz)": "3000",
              "high-priority-max-avx2-frequency(MHz)": "2800",
              "high-priority-max-avx512-frequency(MHz)": "2600"
            },
Because it is a duplicate of "speed-select-turbo-freq": "disabled"
Same is true for "speed-select-base-freq".

To avoid this add "-properties" suffix for the second instance to
differentiate.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 tools/power/x86/intel-speed-select/isst-display.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/power/x86/intel-speed-select/isst-display.c b/tools/power/x86/intel-speed-select/isst-display.c
index 4fb0c1d49d64..3d70be2a9f61 100644
--- a/tools/power/x86/intel-speed-select/isst-display.c
+++ b/tools/power/x86/intel-speed-select/isst-display.c
@@ -178,7 +178,7 @@ static void _isst_pbf_display_information(int cpu, FILE *outf, int level,
 	char header[256];
 	char value[256];
 
-	snprintf(header, sizeof(header), "speed-select-base-freq");
+	snprintf(header, sizeof(header), "speed-select-base-freq-properties");
 	format_and_print(outf, disp_level, header, NULL);
 
 	snprintf(header, sizeof(header), "high-priority-base-frequency(MHz)");
@@ -224,7 +224,7 @@ static void _isst_fact_display_information(int cpu, FILE *outf, int level,
 	char value[256];
 	int j;
 
-	snprintf(header, sizeof(header), "speed-select-turbo-freq");
+	snprintf(header, sizeof(header), "speed-select-turbo-freq-properties");
 	format_and_print(outf, base_level, header, NULL);
 	for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) {
 		if (fact_bucket != 0xff && fact_bucket != j)
-- 
2.24.1