[PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone
@ 2020-02-27  1:26 Ondrej Jirman
  2020-02-27  1:26 ` [PATCH v2 1/3] arm64: dts: sun50i-a64: Add i2c2 pins Ondrej Jirman
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Ondrej Jirman @ 2020-02-27  1:26 UTC (permalink / raw)
  To: linux-sunxi, Rob Herring, Maxime Ripard, Chen-Yu Tsai
  Cc: Ondrej Jirman, Mark Rutland, Corentin Labbe,
	Georgii Staroselskii, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah, Icenowy Zheng, devicetree, linux-arm-kernel,
	linux-kernel

This series adds an initial support for Pine64 PinePhone.

Please take a look.

thank you and regards,
  Ondrej Jirman


Changes in v2:
- make i2c2_pins default pinctrl config for i2c2 node
- add description of the differences between 1.0 and 1.1 to the
  commit message
- added copyright header for Martijn Braam
- drop pinctrl config from i2c1 and i2c2 nodes, since it's
  now the default
- extend comments on i2c2 and uart3 nodes to be more clear
- rebased on top of linux-next and resolved conflicts
- dropped the function-enumerator from leds

Changes not made:
- I didn't drop pinctrl configs on mmc0, mmc2 and uart3
  - these are actually not default in dtsi, as was suggested
- gpio-leds kept with the new function/color binding, but I dropped
  the function-enumerator

It seems intention for the future (since about 06-2019[0]) is for LEDs to not
have a devicename in their class name, because that's determinable
from the sysfs in other ways, and to use the function and color
properties instead of label in DT.

[0] https://lore.kernel.org/lkml/20190609190803.14815-5-jacek.anaszewski@gmail.com/T/

function-enumerator is supposed to be used if function/color don't
make the LED name unique for the board. [1] So I dropped function-enumerator
from my series, as it just added a numeric suffix to the LED name
for no reason.

[1] https://lore.kernel.org/patchwork/patch/1063388/

This follow the recent new board binding additions to the kernel (in 5.6):

https://elixir.bootlin.com/linux/v5.6-rc3/source/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi#L96

Ondrej Jirman (3):
  arm64: dts: sun50i-a64: Add i2c2 pins
  dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings
  arm64: dts: allwinner: Add initial support for Pine64 PinePhone

 .../devicetree/bindings/arm/sunxi.yaml        |  10 +
 arch/arm64/boot/dts/allwinner/Makefile        |   2 +
 .../allwinner/sun50i-a64-pinephone-1.0.dts    |  11 +
 .../allwinner/sun50i-a64-pinephone-1.1.dts    |  11 +
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 379 ++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi |   8 +-
 6 files changed, 420 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi

-- 
2.25.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 1/3] arm64: dts: sun50i-a64: Add i2c2 pins
  2020-02-27  1:26 [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Ondrej Jirman
@ 2020-02-27  1:26 ` Ondrej Jirman
  2020-02-27  1:26 ` [PATCH v2 2/3] dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings Ondrej Jirman
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 7+ messages in thread
From: Ondrej Jirman @ 2020-02-27  1:26 UTC (permalink / raw)
  To: linux-sunxi, Rob Herring, Maxime Ripard, Chen-Yu Tsai
  Cc: Ondrej Jirman, Mark Rutland, Corentin Labbe,
	Georgii Staroselskii, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah, Icenowy Zheng, devicetree, linux-arm-kernel,
	linux-kernel

PinePhone needs I2C2 pins description. Add it, and make it default
for i2c2, since it's the only possiblilty.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 72b1b34879c6d..990de71ca048a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -671,6 +671,11 @@ i2c1_pins: i2c1-pins {
 				function = "i2c1";
 			};
 
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
 			/omit-if-no-ref/
 			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
@@ -958,12 +963,13 @@ i2c2: i2c@1c2b400 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-
 		spi0: spi@1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
-- 
2.25.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 2/3] dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings
  2020-02-27  1:26 [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Ondrej Jirman
  2020-02-27  1:26 ` [PATCH v2 1/3] arm64: dts: sun50i-a64: Add i2c2 pins Ondrej Jirman
@ 2020-02-27  1:26 ` Ondrej Jirman
  2020-02-27  1:32   ` Ondřej Jirman
  2020-02-27  1:26 ` [PATCH v2 3/3] arm64: dts: allwinner: Add initial support for Pine64 PinePhone Ondrej Jirman
  2020-02-27 13:04 ` [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Maxime Ripard
  3 siblings, 1 reply; 7+ messages in thread
From: Ondrej Jirman @ 2020-02-27  1:26 UTC (permalink / raw)
  To: linux-sunxi, Rob Herring, Maxime Ripard, Chen-Yu Tsai
  Cc: Ondrej Jirman, Mark Rutland, Corentin Labbe,
	Georgii Staroselskii, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah, Icenowy Zheng, devicetree, linux-arm-kernel,
	linux-kernel

Document board compatible names for Pine64 PinePhone:

- 1.0 - Developer variant
- 1.1 - Braveheart variant

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 Documentation/devicetree/bindings/arm/sunxi.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 5b22b77e4bb73..abf2d97fb7ae3 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -642,6 +642,16 @@ properties:
           - const: pine64,pinebook
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PinePhone Developer Batch (1.0)
+        items:
+          - const: pine64,pinephone-1.0
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone Braveheart (1.1)
+        items:
+          - const: pine64,pinephone-1.1
+          - const: allwinner,sun50i-a64
+
       - description: Pine64 PineTab
         items:
           - const: pine64,pinetab
-- 
2.25.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 2/3] dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings
  2020-02-27  1:26 ` [PATCH v2 2/3] dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings Ondrej Jirman
@ 2020-02-27  1:32   ` Ondřej Jirman
  0 siblings, 0 replies; 7+ messages in thread
From: Ondřej Jirman @ 2020-02-27  1:32 UTC (permalink / raw)
  To: linux-sunxi, Rob Herring, Maxime Ripard, Chen-Yu Tsai
  Cc: Mark Rutland, Corentin Labbe, Georgii Staroselskii,
	Samuel Holland, Martijn Braam, Luca Weiss, Bhushan Shah,
	Icenowy Zheng, devicetree, linux-arm-kernel, linux-kernel

Hello,

On Thu, Feb 27, 2020 at 02:26:49AM +0100, megous hlavni wrote:
> Document board compatible names for Pine64 PinePhone:
> 
> - 1.0 - Developer variant
> - 1.1 - Braveheart variant
> 
> Signed-off-by: Ondrej Jirman <megous@megous.com>

This also got:

Reviewed-by: Rob Herring <robh@kernel.org>

short time ago on v1. I didn't catch that before sending v2 out.

regards,
	o.

> ---
>  Documentation/devicetree/bindings/arm/sunxi.yaml | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
> index 5b22b77e4bb73..abf2d97fb7ae3 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> @@ -642,6 +642,16 @@ properties:
>            - const: pine64,pinebook
>            - const: allwinner,sun50i-a64
>  
> +      - description: Pine64 PinePhone Developer Batch (1.0)
> +        items:
> +          - const: pine64,pinephone-1.0
> +          - const: allwinner,sun50i-a64
> +
> +      - description: Pine64 PinePhone Braveheart (1.1)
> +        items:
> +          - const: pine64,pinephone-1.1
> +          - const: allwinner,sun50i-a64
> +
>        - description: Pine64 PineTab
>          items:
>            - const: pine64,pinetab
> -- 
> 2.25.1
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 3/3] arm64: dts: allwinner: Add initial support for Pine64 PinePhone
  2020-02-27  1:26 [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Ondrej Jirman
  2020-02-27  1:26 ` [PATCH v2 1/3] arm64: dts: sun50i-a64: Add i2c2 pins Ondrej Jirman
  2020-02-27  1:26 ` [PATCH v2 2/3] dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings Ondrej Jirman
@ 2020-02-27  1:26 ` Ondrej Jirman
  2020-02-27 13:04 ` [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Maxime Ripard
  3 siblings, 0 replies; 7+ messages in thread
From: Ondrej Jirman @ 2020-02-27  1:26 UTC (permalink / raw)
  To: linux-sunxi, Rob Herring, Maxime Ripard, Chen-Yu Tsai
  Cc: Ondrej Jirman, Mark Rutland, Corentin Labbe,
	Georgii Staroselskii, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah, Icenowy Zheng, devicetree, linux-arm-kernel,
	linux-kernel

At the moment PinePhone comes in two slightly incompatible variants:

- 1.0: Early Developer Batch
- 1.1: Braveheart Batch

There will be at least one more incompatible variant in the very near
future, so let's start by sharing the dtsi among multiple variants,
right away, even though the HW description doesn't yet include the
different bits.

The differences between 1.0 and 1.1 are: change in pins that control
the flash LED, differences in modem power status signal routing, and
maybe some other subtler things, that have not been determined yet.

This is a basic DT that includes only features that are already
supported by mainline drivers.

Co-developed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Co-developed-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   2 +
 .../allwinner/sun50i-a64-pinephone-1.0.dts    |  11 +
 .../allwinner/sun50i-a64-pinephone-1.1.dts    |  11 +
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 379 ++++++++++++++++++
 4 files changed, 403 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 6dad63881cd3a..e4d3cd0ac5bb7 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000000000..0c42272106afa
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000000000..06a775c41664b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000000000..cefda145c3c9d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		green {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		red {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Accelerometer/gyroscope */
+	mpu6050@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
-- 
2.25.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone
  2020-02-27  1:26 [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Ondrej Jirman
                   ` (2 preceding siblings ...)
  2020-02-27  1:26 ` [PATCH v2 3/3] arm64: dts: allwinner: Add initial support for Pine64 PinePhone Ondrej Jirman
@ 2020-02-27 13:04 ` Maxime Ripard
  2020-02-27 15:52   ` Ondřej Jirman
  3 siblings, 1 reply; 7+ messages in thread
From: Maxime Ripard @ 2020-02-27 13:04 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Rob Herring, Chen-Yu Tsai, Mark Rutland,
	Corentin Labbe, Georgii Staroselskii, Samuel Holland,
	Martijn Braam, Luca Weiss, Bhushan Shah, Icenowy Zheng,
	devicetree, linux-arm-kernel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 227 bytes --]

On Thu, Feb 27, 2020 at 02:26:47AM +0100, Ondrej Jirman wrote:
> This series adds an initial support for Pine64 PinePhone.
>
> Please take a look.
>
> thank you and regards,
>   Ondrej Jirman

Applied all three, thanks

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone
  2020-02-27 13:04 ` [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Maxime Ripard
@ 2020-02-27 15:52   ` Ondřej Jirman
  0 siblings, 0 replies; 7+ messages in thread
From: Ondřej Jirman @ 2020-02-27 15:52 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: linux-sunxi, Rob Herring, Chen-Yu Tsai, Mark Rutland,
	Corentin Labbe, Georgii Staroselskii, Samuel Holland,
	Martijn Braam, Luca Weiss, Bhushan Shah, Icenowy Zheng,
	devicetree, linux-arm-kernel, linux-kernel

On Thu, Feb 27, 2020 at 02:04:27PM +0100, Maxime Ripard wrote:
> On Thu, Feb 27, 2020 at 02:26:47AM +0100, Ondrej Jirman wrote:
> > This series adds an initial support for Pine64 PinePhone.
> >
> > Please take a look.
> >
> > thank you and regards,
> >   Ondrej Jirman
> 
> Applied all three, thanks

Thank you too! :)

regards,
	o.

> Maxime



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2020-02-27 15:53 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-27  1:26 [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Ondrej Jirman
2020-02-27  1:26 ` [PATCH v2 1/3] arm64: dts: sun50i-a64: Add i2c2 pins Ondrej Jirman
2020-02-27  1:26 ` [PATCH v2 2/3] dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings Ondrej Jirman
2020-02-27  1:32   ` Ondřej Jirman
2020-02-27  1:26 ` [PATCH v2 3/3] arm64: dts: allwinner: Add initial support for Pine64 PinePhone Ondrej Jirman
2020-02-27 13:04 ` [PATCH v2 0/3] Add support for Pine64 PinePhone Linux Smartphone Maxime Ripard
2020-02-27 15:52   ` Ondřej Jirman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®