[PATCH v3 06/12] mtd: spi-nor: get command opcode extension type from BFPT

[Pratyush Yadav <p.yadav@ti.com>]

Some devices in DTR mode expect an extra command byte called the
extension. The extension can either be same as the opcode, bitwise
inverse of the opcode, or another additional byte forming a 16-byte
opcode. Get the extension type from the BFPT. For now, only flashes with
"repeat" and "inverse" extensions are supported.

As of JESD216D.01, BFPT is 20 DWORDs, so update the table size to
reflect that.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 9335692e9bcb..91abeb280cd4 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -79,11 +79,11 @@ struct sfdp_header {
 /* Basic Flash Parameter Table */
 
 /*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
- * They are indexed from 1 but C arrays are indexed from 0.
+ * JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs. They are
+ * indexed from 1 but C arrays are indexed from 0.
  */
 #define BFPT_DWORD(i)		((i) - 1)
-#define BFPT_DWORD_MAX		16
+#define BFPT_DWORD_MAX		20
 
 /* The first version of JESD216 defined only 9 DWORDs. */
 #define BFPT_DWORD_MAX_JESD216			9
@@ -148,6 +148,12 @@ struct sfdp_header {
 #define BFPT_DWORD15_QER_SR2_BIT1_NO_RD		(0x4UL << 20)
 #define BFPT_DWORD15_QER_SR2_BIT1		(0x5UL << 20) /* Spansion */
 
+#define BFPT_DWORD18_CMD_EXT_MASK		GENMASK(30, 29)
+#define BFPT_DWORD18_CMD_EXT_REP		(0x0UL << 29) /* Repeat */
+#define BFPT_DWORD18_CMD_EXT_INV		(0x1UL << 29) /* Invert */
+#define BFPT_DWORD18_CMD_EXT_RES		(0x2UL << 29) /* Reserved */
+#define BFPT_DWORD18_CMD_EXT_16B		(0x3UL << 29) /* 16-bit opcode */
+
 struct sfdp_bfpt {
 	u32	dwords[BFPT_DWORD_MAX];
 };
@@ -3917,6 +3923,24 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 		return -EINVAL;
 	}
 
+	/* 8D-8D-8D command extension. */
+	switch (bfpt.dwords[BFPT_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
+	case BFPT_DWORD18_CMD_EXT_REP:
+		nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
+		break;
+
+	case BFPT_DWORD18_CMD_EXT_INV:
+		nor->cmd_ext_type = SPI_NOR_EXT_INVERT;
+		break;
+
+	case BFPT_DWORD18_CMD_EXT_RES:
+		return -EINVAL;
+
+	case BFPT_DWORD18_CMD_EXT_16B:
+		dev_err(nor->dev, "16-bit opcodes not supported\n");
+		return -ENOTSUPP;
+	}
+
 	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
 }
 
-- 
2.25.0