From: Jiri Olsa <jolsa@kernel.org>
To: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>,
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
"David S. Miller" <davem@davemloft.net>,
Masami Hiramatsu <mhiramat@kernel.org>,
Peter Zijlstra <peterz@infradead.org>
Cc: lkml <linux-kernel@vger.kernel.org>,
"bibo,mao" <bibo.mao@intel.com>,
"Ziqian SUN (Zamir)" <zsun@redhat.com>
Subject: [RFC] kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
Date: Wed, 8 Apr 2020 18:46:41 +0200 [thread overview]
Message-ID: <20200408164641.3299633-1-jolsa@kernel.org> (raw)
hi,
Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:
============================================
WARNING: possible recursive locking detected
5.6.0-rc6+ #6 Not tainted
--------------------------------------------
sched-messaging/2767 is trying to acquire lock:
ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0
but task is already holding lock:
ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(kretprobe_table_locks[i].lock));
lock(&(kretprobe_table_locks[i].lock));
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by sched-messaging/2767:
#0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
stack backtrace:
CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
Call Trace:
dump_stack+0x96/0xe0
__lock_acquire.cold.57+0x173/0x2b7
? native_queued_spin_lock_slowpath+0x42b/0x9e0
? lockdep_hardirqs_on+0x590/0x590
? __lock_acquire+0xf63/0x4030
lock_acquire+0x15a/0x3d0
? kretprobe_hash_lock+0x52/0xa0
_raw_spin_lock_irqsave+0x36/0x70
? kretprobe_hash_lock+0x52/0xa0
kretprobe_hash_lock+0x52/0xa0
trampoline_handler+0xf8/0x940
? kprobe_fault_handler+0x380/0x380
? find_held_lock+0x3a/0x1c0
kretprobe_trampoline+0x25/0x50
? lock_acquired+0x392/0xbc0
? _raw_spin_lock_irqsave+0x50/0x70
? __get_valid_kprobe+0x1f0/0x1f0
? _raw_spin_unlock_irqrestore+0x3b/0x40
? finish_task_switch+0x4b9/0x6d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.
The problem is in outside kprobe_flush_task, where we call:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave
where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.
The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed
---> kretprobe_table_locks locked
kretprobe_trampoline
trampoline_handler
kretprobe_hash_lock(current, &head, &flags); <--- deadlock
The change below sets current_kprobe in kprobe_flush_task, so the probe
recursion protection check is hit and the probe is never set. It seems
to fix the deadlock.
I'm not sure this is the best fix, any ideas are welcome ;-)
thanks,
jirka
---
kernel/kprobes.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 2625c241ac00..b13247cae752 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1236,6 +1236,10 @@ __releases(hlist_lock)
}
NOKPROBE_SYMBOL(kretprobe_table_unlock);
+static struct kprobe kretprobe_dummy = {
+ .addr = (void *)kretprobe_trampoline,
+};
+
/*
* This function is called from finish_task_switch when task tk becomes dead,
* so that we can recycle any function-return probe instances associated
@@ -1256,12 +1260,14 @@ void kprobe_flush_task(struct task_struct *tk)
INIT_HLIST_HEAD(&empty_rp);
hash = hash_ptr(tk, KPROBE_HASH_BITS);
head = &kretprobe_inst_table[hash];
+ __this_cpu_write(current_kprobe, &kretprobe_dummy);
kretprobe_table_lock(hash, &flags);
hlist_for_each_entry_safe(ri, tmp, head, hlist) {
if (ri->task == tk)
recycle_rp_inst(ri, &empty_rp);
}
kretprobe_table_unlock(hash, &flags);
+ __this_cpu_write(current_kprobe, NULL);
hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
hlist_del(&ri->hlist);
kfree(ri);
--
2.25.2
next reply other threads:[~2020-04-08 16:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 16:46 Jiri Olsa [this message]
2020-04-09 9:02 ` Naveen N. Rao
2020-04-09 18:43 ` Jiri Olsa
2020-04-09 12:38 ` Masami Hiramatsu
2020-04-09 12:52 ` Jiri Olsa
2020-04-09 14:16 ` Masami Hiramatsu
2020-04-09 13:16 ` Naveen N. Rao
2020-04-09 14:26 ` Masami Hiramatsu
2020-04-09 14:41 ` Masami Hiramatsu
2020-04-09 18:44 ` Jiri Olsa
2020-04-09 20:13 ` Jiri Olsa
2020-04-10 0:31 ` Masami Hiramatsu
2020-04-14 16:03 ` Jiri Olsa
2020-04-15 9:05 ` [PATCH] " Jiri Olsa
2020-04-16 1:55 ` Masami Hiramatsu
2020-04-16 9:13 ` Jiri Olsa
2020-04-16 13:42 ` Masami Hiramatsu
2020-04-16 14:31 ` [PATCHv2] " Jiri Olsa
2020-04-17 7:38 ` Masami Hiramatsu
2020-04-28 21:36 ` Jiri Olsa
2020-05-01 2:01 ` Masami Hiramatsu
2020-05-07 10:15 ` Jiri Olsa
2020-04-10 1:31 ` [RFC] " Ziqian SUN (Zamir)
2020-04-14 16:03 ` Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408164641.3299633-1-jolsa@kernel.org \
--to=jolsa@kernel.org \
--cc=anil.s.keshavamurthy@intel.com \
--cc=bibo.mao@intel.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=naveen.n.rao@linux.ibm.com \
--cc=peterz@infradead.org \
--cc=zsun@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome