Re: [PATCH 1/5] dt-bindings: clock: Convert i.MX6Q clock to json-schema

[Marco Felsch <m.felsch@pengutronix.de>]

Hi Anson,

thanks for the patch. I have two questions please see inline which
applies to all patches.

On 20-04-16 12:26, Anson Huang wrote:

...

> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> new file mode 100644
> index 0000000..084d4f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Clock bindings for Freescale i.MX6 Quad
> +
> +maintainers:
> +  - Anson Huang <Anson.Huang@nxp.com>
> +
> +properties:
> +  compatible:
> +    const: fsl,imx6q-ccm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1

Why 1 and not 2? The RM describes that the ccm has 2 interrupts.

> +    maxItems: 2
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  clocks:
> +    items:
> +      - description: 24m osc
> +      - description: 32k osc
> +      - description: ckih1 clock input
> +      - description: anaclk1 clock input
> +      - description: anaclk2 clock input
> +
> +  clock-names:
> +    items:
> +      - const: osc
> +      - const: ckil
> +      - const: ckih1
> +      - const: anaclk1
> +      - const: anaclk2
> +
> +  fsl,pmic-stby-poweroff:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      Use this property if the SoC should be powered off by external power
> +      management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> +      Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> +      be using "syscon-poweroff" driver instead.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - '#clock-cells'
> +
> +examples:
> +  # Clock Control Module node:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    clks: clock-controller@20c4000 {
> +        compatible = "fsl,imx6q-ccm";
> +        reg = <0x020c4000 0x4000>;
> +        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
> +                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
> +        #clock-cells = <1>;
> +    };
> +
> +...

Why these '...' here?

Regards,
  Marco

> -- 
> 2.7.4