From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
hemantk@codeaurora.org, jhugo@codeaurora.org
Subject: Re: [PATCH v7 3/8] bus: mhi: core: Add range check for channel id received in event ring
Date: Sat, 9 May 2020 11:18:47 +0530 [thread overview]
Message-ID: <20200509054847.GC5845@Mani-XPS-13-9360> (raw)
In-Reply-To: <1588991208-26928-4-git-send-email-bbhatt@codeaurora.org>
On Fri, May 08, 2020 at 07:26:43PM -0700, Bhaumik Bhatt wrote:
> From: Hemant Kumar <hemantk@codeaurora.org>
>
> MHI data completion handler function reads channel id from event
> ring element. Value is under the control of MHI devices and can be
> any value between 0 and 255. In order to prevent out of bound access
> add a bound check against the max channel supported by controller
> and skip processing of that event ring element.
>
> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> drivers/bus/mhi/core/main.c | 40 +++++++++++++++++++++++++++++-----------
> 1 file changed, 29 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 605640c..30798ec 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -775,9 +775,18 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl,
> }
> case MHI_PKT_TYPE_TX_EVENT:
> chan = MHI_TRE_GET_EV_CHID(local_rp);
> - mhi_chan = &mhi_cntrl->mhi_chan[chan];
> - parse_xfer_event(mhi_cntrl, local_rp, mhi_chan);
> - event_quota--;
> +
> + WARN_ON(chan >= mhi_cntrl->max_chan);
> +
> + /*
> + * Only process the event ring elements whose channel
> + * ID is within the maximum supported range.
> + */
> + if (chan < mhi_cntrl->max_chan) {
> + mhi_chan = &mhi_cntrl->mhi_chan[chan];
> + parse_xfer_event(mhi_cntrl, local_rp, mhi_chan);
> + event_quota--;
> + }
> break;
> default:
> dev_err(dev, "Unhandled event type: %d\n", type);
> @@ -820,14 +829,23 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl,
> enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp);
>
> chan = MHI_TRE_GET_EV_CHID(local_rp);
> - mhi_chan = &mhi_cntrl->mhi_chan[chan];
> -
> - if (likely(type == MHI_PKT_TYPE_TX_EVENT)) {
> - parse_xfer_event(mhi_cntrl, local_rp, mhi_chan);
> - event_quota--;
> - } else if (type == MHI_PKT_TYPE_RSC_TX_EVENT) {
> - parse_rsc_event(mhi_cntrl, local_rp, mhi_chan);
> - event_quota--;
> +
> + WARN_ON(chan >= mhi_cntrl->max_chan);
> +
> + /*
> + * Only process the event ring elements whose channel
> + * ID is within the maximum supported range.
> + */
> + if (chan < mhi_cntrl->max_chan) {
> + mhi_chan = &mhi_cntrl->mhi_chan[chan];
> +
> + if (likely(type == MHI_PKT_TYPE_TX_EVENT)) {
> + parse_xfer_event(mhi_cntrl, local_rp, mhi_chan);
> + event_quota--;
> + } else if (type == MHI_PKT_TYPE_RSC_TX_EVENT) {
> + parse_rsc_event(mhi_cntrl, local_rp, mhi_chan);
> + event_quota--;
> + }
> }
>
> mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-05-09 5:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-09 2:26 [PATCH v7 0/8] Bug fixes and improved logging in MHI Bhaumik Bhatt
2020-05-09 2:26 ` [PATCH v7 1/8] bus: mhi: core: Refactor mhi queue APIs Bhaumik Bhatt
2020-05-09 5:46 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 2/8] bus: mhi: core: Cache intmod from mhi event to mhi channel Bhaumik Bhatt
2020-05-09 5:47 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 3/8] bus: mhi: core: Add range check for channel id received in event ring Bhaumik Bhatt
2020-05-09 5:48 ` Manivannan Sadhasivam [this message]
2020-05-09 2:26 ` [PATCH v7 4/8] bus: mhi: core: Read transfer length from an event properly Bhaumik Bhatt
2020-05-09 5:49 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 5/8] bus: mhi: core: Handle firmware load using state worker Bhaumik Bhatt
2020-05-09 5:49 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 6/8] bus: mhi: core: Return appropriate error codes for AMSS load failure Bhaumik Bhatt
2020-05-09 5:50 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 7/8] bus: mhi: core: Improve debug logs for loading firmware Bhaumik Bhatt
2020-05-09 5:50 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 8/8] bus: mhi: core: Ensure non-zero session or sequence ID values are used Bhaumik Bhatt
2020-05-09 5:51 ` Manivannan Sadhasivam
2020-05-09 8:32 ` [PATCH v7 0/8] Bug fixes and improved logging in MHI Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200509054847.GC5845@Mani-XPS-13-9360 \
--to=manivannan.sadhasivam@linaro.org \
--cc=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®