From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
hemantk@codeaurora.org, jhugo@codeaurora.org
Subject: Re: [PATCH v7 7/8] bus: mhi: core: Improve debug logs for loading firmware
Date: Sat, 9 May 2020 11:20:43 +0530 [thread overview]
Message-ID: <20200509055043.GG5845@Mani-XPS-13-9360> (raw)
In-Reply-To: <1588991208-26928-8-git-send-email-bbhatt@codeaurora.org>
On Fri, May 08, 2020 at 07:26:47PM -0700, Bhaumik Bhatt wrote:
> Add log messages to track boot flow errors and timeouts in SBL or AMSS
> firmware loading to aid in debug.
>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> drivers/bus/mhi/core/boot.c | 21 ++++++++++++++++++---
> 1 file changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
> index cf6dc5a..80e4d76 100644
> --- a/drivers/bus/mhi/core/boot.c
> +++ b/drivers/bus/mhi/core/boot.c
> @@ -121,7 +121,8 @@ static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
> ee = mhi_get_exec_env(mhi_cntrl);
> }
>
> - dev_dbg(dev, "Waiting for image download completion, current EE: %s\n",
> + dev_dbg(dev,
> + "Waiting for RDDM image download via BHIe, current EE:%s\n",
> TO_MHI_EXEC_STR(ee));
>
> while (retry--) {
> @@ -152,11 +153,14 @@ static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
> int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic)
> {
> void __iomem *base = mhi_cntrl->bhie;
> + struct device *dev = &mhi_cntrl->mhi_dev->dev;
> u32 rx_status;
>
> if (in_panic)
> return __mhi_download_rddm_in_panic(mhi_cntrl);
>
> + dev_dbg(dev, "Waiting for RDDM image download via BHIe\n");
> +
> /* Wait for the image download to complete */
> wait_event_timeout(mhi_cntrl->state_event,
> mhi_read_reg_field(mhi_cntrl, base,
> @@ -174,6 +178,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
> const struct mhi_buf *mhi_buf)
> {
> void __iomem *base = mhi_cntrl->bhie;
> + struct device *dev = &mhi_cntrl->mhi_dev->dev;
> rwlock_t *pm_lock = &mhi_cntrl->pm_lock;
> u32 tx_status, sequence_id;
> int ret;
> @@ -184,6 +189,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
> return -EIO;
> }
>
> + dev_dbg(dev, "Starting AMSS download via BHIe\n");
> mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS,
> upper_32_bits(mhi_buf->dma_addr));
>
> @@ -435,7 +441,12 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
> release_firmware(firmware);
>
> /* Error or in EDL mode, we're done */
> - if (ret || mhi_cntrl->ee == MHI_EE_EDL)
> + if (ret) {
> + dev_err(dev, "MHI did not load SBL, ret:%d\n", ret);
> + return;
> + }
> +
> + if (mhi_cntrl->ee == MHI_EE_EDL)
> return;
>
> write_lock_irq(&mhi_cntrl->pm_lock);
> @@ -463,8 +474,10 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
> if (!mhi_cntrl->fbc_download)
> return;
>
> - if (ret)
> + if (ret) {
> + dev_err(dev, "MHI did not enter READY state\n");
> goto error_read;
> + }
>
> /* Wait for the SBL event */
> ret = wait_event_timeout(mhi_cntrl->state_event,
> @@ -482,6 +495,8 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
> ret = mhi_fw_load_amss(mhi_cntrl,
> /* Vector table is the last entry */
> &image_info->mhi_buf[image_info->entries - 1]);
> + if (ret)
> + dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret);
>
> release_firmware(firmware);
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-05-09 5:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-09 2:26 [PATCH v7 0/8] Bug fixes and improved logging in MHI Bhaumik Bhatt
2020-05-09 2:26 ` [PATCH v7 1/8] bus: mhi: core: Refactor mhi queue APIs Bhaumik Bhatt
2020-05-09 5:46 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 2/8] bus: mhi: core: Cache intmod from mhi event to mhi channel Bhaumik Bhatt
2020-05-09 5:47 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 3/8] bus: mhi: core: Add range check for channel id received in event ring Bhaumik Bhatt
2020-05-09 5:48 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 4/8] bus: mhi: core: Read transfer length from an event properly Bhaumik Bhatt
2020-05-09 5:49 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 5/8] bus: mhi: core: Handle firmware load using state worker Bhaumik Bhatt
2020-05-09 5:49 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 6/8] bus: mhi: core: Return appropriate error codes for AMSS load failure Bhaumik Bhatt
2020-05-09 5:50 ` Manivannan Sadhasivam
2020-05-09 2:26 ` [PATCH v7 7/8] bus: mhi: core: Improve debug logs for loading firmware Bhaumik Bhatt
2020-05-09 5:50 ` Manivannan Sadhasivam [this message]
2020-05-09 2:26 ` [PATCH v7 8/8] bus: mhi: core: Ensure non-zero session or sequence ID values are used Bhaumik Bhatt
2020-05-09 5:51 ` Manivannan Sadhasivam
2020-05-09 8:32 ` [PATCH v7 0/8] Bug fixes and improved logging in MHI Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200509055043.GG5845@Mani-XPS-13-9360 \
--to=manivannan.sadhasivam@linaro.org \
--cc=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®