* [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic [not found] <20200511231930.2825183-1-bryan.odonoghue@linaro.org> @ 2020-05-11 23:19 ` Bryan O'Donoghue 2020-05-13 14:04 ` Heikki Krogerus 0 siblings, 1 reply; 2+ messages in thread From: Bryan O'Donoghue @ 2020-05-11 23:19 UTC (permalink / raw) To: heikki.krogerus, gregkh, linux-usb, bryan.odonoghue Cc: Nikolaus Voss, Andy Shevchenko, Gustavo A . R . Silva, Kees Cook, linux-kernel This patch adds USB role switch support to the tps6598x. The setup to initiate or accept a data-role switch is both assumed and currently required to be baked-into the firmware as described in TI's document here. Link: https://www.ti.com/lit/an/slva843a/slva843a.pdf With this change its possible to use the USB role-switch API to detect and notify role-switches to downstream consumers. Tested with a ChipIdea controller on a Qualcomm MSM8939. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- drivers/usb/typec/tps6598x.c | 57 +++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 7 deletions(-) diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c index defa651282b0..b7c9fe5caabe 100644 --- a/drivers/usb/typec/tps6598x.c +++ b/drivers/usb/typec/tps6598x.c @@ -12,6 +12,7 @@ #include <linux/regmap.h> #include <linux/interrupt.h> #include <linux/usb/typec.h> +#include <linux/usb/role.h> /* Register offsets */ #define TPS_REG_VID 0x00 @@ -94,6 +95,7 @@ struct tps6598x { struct typec_port *port; struct typec_partner *partner; struct usb_pd_identity partner_identity; + struct usb_role_switch *role_sw; }; /* @@ -190,6 +192,23 @@ static int tps6598x_read_partner_identity(struct tps6598x *tps) return 0; } +static void tps6598x_set_data_role(struct tps6598x *tps, + enum typec_data_role role, bool connected) +{ + enum usb_role role_val; + + if (role == TYPEC_HOST) + role_val = USB_ROLE_HOST; + else + role_val = USB_ROLE_DEVICE; + + if (!connected) + role_val = USB_ROLE_NONE; + + usb_role_switch_set_role(tps->role_sw, role_val); + typec_set_data_role(tps->port, role); +} + static int tps6598x_connect(struct tps6598x *tps, u32 status) { struct typec_partner_desc desc; @@ -220,7 +239,7 @@ static int tps6598x_connect(struct tps6598x *tps, u32 status) typec_set_pwr_opmode(tps->port, mode); typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status)); typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status)); - typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status)); + tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), true); tps->partner = typec_register_partner(tps->port, &desc); if (IS_ERR(tps->partner)) @@ -240,7 +259,7 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status) typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB); typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status)); typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status)); - typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status)); + tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), false); } static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, @@ -328,7 +347,7 @@ static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role) goto out_unlock; } - typec_set_data_role(tps->port, role); + tps6598x_set_data_role(tps, role, true); out_unlock: mutex_unlock(&tps->lock); @@ -452,6 +471,7 @@ static int tps6598x_probe(struct i2c_client *client) { struct typec_capability typec_cap = { }; struct tps6598x *tps; + struct fwnode_handle *fwnode; u32 status; u32 conf; u32 vid; @@ -495,11 +515,22 @@ static int tps6598x_probe(struct i2c_client *client) if (ret < 0) return ret; + fwnode = device_get_named_child_node(&client->dev, "connector"); + if (IS_ERR(fwnode)) + return PTR_ERR(fwnode); + + tps->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(tps->role_sw)) { + ret = PTR_ERR(tps->role_sw); + goto err_fwnode_put; + } + typec_cap.revision = USB_TYPEC_REV_1_2; typec_cap.pd_revision = 0x200; typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; typec_cap.driver_data = tps; typec_cap.ops = &tps6598x_ops; + typec_cap.fwnode = fwnode; switch (TPS_SYSCONF_PORTINFO(conf)) { case TPS_PORTINFO_SINK_ACCESSORY: @@ -525,12 +556,16 @@ static int tps6598x_probe(struct i2c_client *client) typec_cap.data = TYPEC_PORT_DFP; break; default: - return -ENODEV; + ret = -ENODEV; + goto err_role_put; } tps->port = typec_register_port(&client->dev, &typec_cap); - if (IS_ERR(tps->port)) - return PTR_ERR(tps->port); + if (IS_ERR(tps->port)) { + ret = PTR_ERR(tps->port); + goto err_role_put; + } + fwnode_handle_put(fwnode); if (status & TPS_STATUS_PLUG_PRESENT) { ret = tps6598x_connect(tps, status); @@ -545,12 +580,19 @@ static int tps6598x_probe(struct i2c_client *client) if (ret) { tps6598x_disconnect(tps, 0); typec_unregister_port(tps->port); - return ret; + goto err_role_put; } i2c_set_clientdata(client, tps); return 0; + +err_role_put: + usb_role_switch_put(tps->role_sw); +err_fwnode_put: + fwnode_handle_put(fwnode); + + return ret; } static int tps6598x_remove(struct i2c_client *client) @@ -559,6 +601,7 @@ static int tps6598x_remove(struct i2c_client *client) tps6598x_disconnect(tps, 0); typec_unregister_port(tps->port); + usb_role_switch_put(tps->role_sw); return 0; } -- 2.25.1 ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic 2020-05-11 23:19 ` [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic Bryan O'Donoghue @ 2020-05-13 14:04 ` Heikki Krogerus 0 siblings, 0 replies; 2+ messages in thread From: Heikki Krogerus @ 2020-05-13 14:04 UTC (permalink / raw) To: Bryan O'Donoghue Cc: gregkh, linux-usb, Nikolaus Voss, Andy Shevchenko, Gustavo A . R . Silva, Kees Cook, linux-kernel On Tue, May 12, 2020 at 12:19:30AM +0100, Bryan O'Donoghue wrote: > This patch adds USB role switch support to the tps6598x. > > The setup to initiate or accept a data-role switch is both assumed and > currently required to be baked-into the firmware as described in TI's > document here. > > Link: https://www.ti.com/lit/an/slva843a/slva843a.pdf > > With this change its possible to use the USB role-switch API to detect and > notify role-switches to downstream consumers. > > Tested with a ChipIdea controller on a Qualcomm MSM8939. > > Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Cc: Gustavo A. R. Silva <garsilva@embeddedor.com> > Cc: Kees Cook <keescook@chromium.org> > Cc: linux-usb@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > drivers/usb/typec/tps6598x.c | 57 +++++++++++++++++++++++++++++++----- > 1 file changed, 50 insertions(+), 7 deletions(-) > > diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c > index defa651282b0..b7c9fe5caabe 100644 > --- a/drivers/usb/typec/tps6598x.c > +++ b/drivers/usb/typec/tps6598x.c > @@ -12,6 +12,7 @@ > #include <linux/regmap.h> > #include <linux/interrupt.h> > #include <linux/usb/typec.h> > +#include <linux/usb/role.h> > > /* Register offsets */ > #define TPS_REG_VID 0x00 > @@ -94,6 +95,7 @@ struct tps6598x { > struct typec_port *port; > struct typec_partner *partner; > struct usb_pd_identity partner_identity; > + struct usb_role_switch *role_sw; > }; > > /* > @@ -190,6 +192,23 @@ static int tps6598x_read_partner_identity(struct tps6598x *tps) > return 0; > } > > +static void tps6598x_set_data_role(struct tps6598x *tps, > + enum typec_data_role role, bool connected) > +{ > + enum usb_role role_val; > + > + if (role == TYPEC_HOST) > + role_val = USB_ROLE_HOST; > + else > + role_val = USB_ROLE_DEVICE; > + > + if (!connected) > + role_val = USB_ROLE_NONE; > + > + usb_role_switch_set_role(tps->role_sw, role_val); > + typec_set_data_role(tps->port, role); > +} > + > static int tps6598x_connect(struct tps6598x *tps, u32 status) > { > struct typec_partner_desc desc; > @@ -220,7 +239,7 @@ static int tps6598x_connect(struct tps6598x *tps, u32 status) > typec_set_pwr_opmode(tps->port, mode); > typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status)); > typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status)); > - typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status)); > + tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), true); > > tps->partner = typec_register_partner(tps->port, &desc); > if (IS_ERR(tps->partner)) > @@ -240,7 +259,7 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status) > typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB); > typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status)); > typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status)); > - typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status)); > + tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), false); > } > > static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, > @@ -328,7 +347,7 @@ static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role) > goto out_unlock; > } > > - typec_set_data_role(tps->port, role); > + tps6598x_set_data_role(tps, role, true); > > out_unlock: > mutex_unlock(&tps->lock); > @@ -452,6 +471,7 @@ static int tps6598x_probe(struct i2c_client *client) > { > struct typec_capability typec_cap = { }; > struct tps6598x *tps; > + struct fwnode_handle *fwnode; > u32 status; > u32 conf; > u32 vid; > @@ -495,11 +515,22 @@ static int tps6598x_probe(struct i2c_client *client) > if (ret < 0) > return ret; > > + fwnode = device_get_named_child_node(&client->dev, "connector"); > + if (IS_ERR(fwnode)) > + return PTR_ERR(fwnode); > + > + tps->role_sw = fwnode_usb_role_switch_get(fwnode); > + if (IS_ERR(tps->role_sw)) { > + ret = PTR_ERR(tps->role_sw); > + goto err_fwnode_put; > + } > + > typec_cap.revision = USB_TYPEC_REV_1_2; > typec_cap.pd_revision = 0x200; > typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; > typec_cap.driver_data = tps; > typec_cap.ops = &tps6598x_ops; > + typec_cap.fwnode = fwnode; > > switch (TPS_SYSCONF_PORTINFO(conf)) { > case TPS_PORTINFO_SINK_ACCESSORY: > @@ -525,12 +556,16 @@ static int tps6598x_probe(struct i2c_client *client) > typec_cap.data = TYPEC_PORT_DFP; > break; > default: > - return -ENODEV; > + ret = -ENODEV; > + goto err_role_put; > } > > tps->port = typec_register_port(&client->dev, &typec_cap); > - if (IS_ERR(tps->port)) > - return PTR_ERR(tps->port); > + if (IS_ERR(tps->port)) { > + ret = PTR_ERR(tps->port); > + goto err_role_put; > + } > + fwnode_handle_put(fwnode); > > if (status & TPS_STATUS_PLUG_PRESENT) { > ret = tps6598x_connect(tps, status); > @@ -545,12 +580,19 @@ static int tps6598x_probe(struct i2c_client *client) > if (ret) { > tps6598x_disconnect(tps, 0); > typec_unregister_port(tps->port); > - return ret; > + goto err_role_put; > } > > i2c_set_clientdata(client, tps); > > return 0; > + > +err_role_put: > + usb_role_switch_put(tps->role_sw); > +err_fwnode_put: > + fwnode_handle_put(fwnode); > + > + return ret; > } > > static int tps6598x_remove(struct i2c_client *client) > @@ -559,6 +601,7 @@ static int tps6598x_remove(struct i2c_client *client) > > tps6598x_disconnect(tps, 0); > typec_unregister_port(tps->port); > + usb_role_switch_put(tps->role_sw); > > return 0; > } > -- > 2.25.1 thanks, -- heikki ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-05-13 14:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20200511231930.2825183-1-bryan.odonoghue@linaro.org>
2020-05-11 23:19 ` [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic Bryan O'Donoghue
2020-05-13 14:04 ` Heikki Krogerus
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®