From: Akshu Agrawal <akshu.agrawal@amd.com>
To: unlisted-recipients:; (no To-header on input)
Cc: akshu.agrawal@amd.com, yuhsuan@chromium.org,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>, YueHaibing <yuehaibing@huawei.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
alsa-devel@alsa-project.org (moderated list:SOUND - SOC LAYER /
DYNAMIC AUDIO POWER MANAGEM...),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ASoC: AMD: Use mixer control to switch between DMICs
Date: Wed, 27 May 2020 07:10:16 +0530 [thread overview]
Message-ID: <20200527014023.2781-1-akshu.agrawal@amd.com> (raw)
Having mixer control to switch between DMICs prevents user to
initiate capture simultaneously on both the DMIcs.
Earlier 2 separate devices, one for each DMIC, gave an option of
using them simultaneously, which is not supported.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
---
sound/soc/amd/acp3x-rt5682-max9836.c | 43 +++++++++++-----------------
1 file changed, 16 insertions(+), 27 deletions(-)
diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c
index e499c00e0c66..19f55a814547 100644
--- a/sound/soc/amd/acp3x-rt5682-max9836.c
+++ b/sound/soc/amd/acp3x-rt5682-max9836.c
@@ -188,25 +188,27 @@ static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream)
machine->cap_i2s_instance = I2S_BT_INSTANCE;
snd_soc_dai_set_bclk_ratio(codec_dai, 64);
- if (dmic_sel)
- gpiod_set_value(dmic_sel, 0);
return rt5682_clk_enable(substream);
}
-static int acp3x_ec_dmic1_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_card *card = rtd->card;
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+static int front_mic_enabled;
- machine->cap_i2s_instance = I2S_BT_INSTANCE;
- snd_soc_dai_set_bclk_ratio(codec_dai, 64);
- if (dmic_sel)
- gpiod_set_value(dmic_sel, 1);
+static int front_mic_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = front_mic_enabled;
+ return 0;
+}
- return rt5682_clk_enable(substream);
+static int front_mic_set(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ if (dmic_sel) {
+ front_mic_enabled = ucontrol->value.integer.value[0];
+ gpiod_set_value(dmic_sel, !front_mic_enabled);
+ }
+ return 0;
}
static void rt5682_shutdown(struct snd_pcm_substream *substream)
@@ -229,11 +231,6 @@ static const struct snd_soc_ops acp3x_ec_cap0_ops = {
.shutdown = rt5682_shutdown,
};
-static const struct snd_soc_ops acp3x_ec_cap1_ops = {
- .startup = acp3x_ec_dmic1_startup,
- .shutdown = rt5682_shutdown,
-};
-
SND_SOC_DAILINK_DEF(acp3x_i2s,
DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0")));
SND_SOC_DAILINK_DEF(acp3x_bt,
@@ -279,15 +276,6 @@ static struct snd_soc_dai_link acp3x_dai_5682_98357[] = {
.ops = &acp3x_ec_cap0_ops,
SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform),
},
- {
- .name = "acp3x-ec-dmic1-capture",
- .stream_name = "Capture DMIC1",
- .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
- | SND_SOC_DAIFMT_CBS_CFS,
- .dpcm_capture = 1,
- .ops = &acp3x_ec_cap1_ops,
- SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform),
- },
};
static const struct snd_soc_dapm_widget acp3x_widgets[] = {
@@ -307,6 +295,7 @@ static const struct snd_kcontrol_new acp3x_mc_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
SOC_DAPM_PIN_SWITCH("Spk"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_SINGLE_BOOL_EXT("Front Mic", 0, front_mic_get, front_mic_set),
};
static struct snd_soc_card acp3x_card = {
--
2.20.1
next reply other threads:[~2020-05-27 1:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 1:40 Akshu Agrawal [this message]
2020-05-27 11:27 ` Mark Brown
2020-05-28 5:13 ` Agrawal, Akshu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527014023.2781-1-akshu.agrawal@amd.com \
--to=akshu.agrawal@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=yuehaibing@huawei.com \
--cc=yuhsuan@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®