[v2,0/3] add optional reset property arm64: dts: mt7622: add reset node for mmc device mmc: mediatek: add optional module reset property Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 ++ drivers/mmc/host/mtk-sd.c | 13 +++++++++++++ 3 files changed, 17 insertions(+)

[v2,0/3] add optional reset property arm64: dts: mt7622: add reset node for mmc device mmc: mediatek: add optional module reset property Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 ++ drivers/mmc/host/mtk-sd.c | 13 +++++++++++++ 3 files changed, 17 insertions(+)

[Wenbin Mei]

--
2.18.0

[v2,1/3] mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings

[Wenbin Mei]

Add description for resets/reset-names.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
 Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 8a532f4453f2..15d42595a3f3 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -49,6 +49,8 @@ Optional properties:
 		     error caused by stop clock(fifo full)
 		     Valid range = [0:0x7]. if not present, default value is 0.
 		     applied to compatible "mediatek,mt2701-mmc".
+- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
+- reset-names: should be "hrst".
 
 Examples:
 mmc0: mmc@11230000 {
-- 
2.18.0

Re: [v2,1/3] mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings

[Greg KH]

On Wed, Aug 12, 2020 at 09:01:27PM +0800, Wenbin Mei wrote:
> Add description for resets/reset-names.
> 
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 8a532f4453f2..15d42595a3f3 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -49,6 +49,8 @@ Optional properties:
>  		     error caused by stop clock(fifo full)
>  		     Valid range = [0:0x7]. if not present, default value is 0.
>  		     applied to compatible "mediatek,mt2701-mmc".
> +- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
> +- reset-names: should be "hrst".
>  
>  Examples:
>  mmc0: mmc@11230000 {
> -- 
> 2.18.0

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree.  Please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

[v2,2/3] arm64: dts: mt7622: add reset node for mmc device

[Wenbin Mei]

This commit adds reset node for mmc device.

Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
---
 arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 1a39e0ef776b..5b9ec032ce8d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -686,6 +686,8 @@
 		clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
 			 <&topckgen CLK_TOP_MSDC50_0_SEL>;
 		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
+		reset-names = "hrst";
 		status = "disabled";
 	};
 
-- 
2.18.0

Re: [v2,2/3] arm64: dts: mt7622: add reset node for mmc device

[Greg KH]

On Wed, Aug 12, 2020 at 09:01:28PM +0800, Wenbin Mei wrote:
> This commit adds reset node for mmc device.
> 
> Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de>
> ---
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index 1a39e0ef776b..5b9ec032ce8d 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -686,6 +686,8 @@
>  		clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
>  			 <&topckgen CLK_TOP_MSDC50_0_SEL>;
>  		clock-names = "source", "hclk";
> +		resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
> +		reset-names = "hrst";
>  		status = "disabled";
>  	};
>  
> -- 
> 2.18.0

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree.  Please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

[v2,3/3] mmc: mediatek: add optional module reset property

[Wenbin Mei]

This patch fixs eMMC-Access on mt7622/Bpi-64.
Before we got these Errors on mounting eMMC ion R64:
[   48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE)
flags 0x800 phys_seg 1 prio class 0
[   48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write

This patch adds a optional reset management for msdc.
Sometimes the bootloader does not bring msdc register
to default state, so need reset the msdc controller.

Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
---
 drivers/mmc/host/mtk-sd.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 39e7fc54c438..2b243c03c9b2 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/reset.h>
 
 #include <linux/mmc/card.h>
 #include <linux/mmc/core.h>
@@ -434,6 +435,7 @@ struct msdc_host {
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
 	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
+	struct reset_control *reset;
 };
 
 static const struct mtk_mmc_compatible mt8135_compat = {
@@ -1516,6 +1518,12 @@ static void msdc_init_hw(struct msdc_host *host)
 	u32 val;
 	u32 tune_reg = host->dev_comp->pad_tune_reg;
 
+	if (!IS_ERR(host->reset)) {
+		reset_control_assert(host->reset);
+		usleep_range(10, 50);
+		reset_control_deassert(host->reset);
+	}
+
 	/* Configure to MMC/SD mode, clock free running */
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
 
@@ -2273,6 +2281,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	if (IS_ERR(host->src_clk_cg))
 		host->src_clk_cg = NULL;
 
+	host->reset = devm_reset_control_get_optional_exclusive(&pdev->dev,
+								"hrst");
+	if (PTR_ERR(host->reset) == -EPROBE_DEFER)
+		return PTR_ERR(host->reset);
+
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq < 0) {
 		ret = -EINVAL;
-- 
2.18.0

Re: [v2,3/3] mmc: mediatek: add optional module reset property

[Greg KH]

On Wed, Aug 12, 2020 at 09:01:29PM +0800, Wenbin Mei wrote:
> This patch fixs eMMC-Access on mt7622/Bpi-64.
> Before we got these Errors on mounting eMMC ion R64:
> [   48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE)
> flags 0x800 phys_seg 1 prio class 0
> [   48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write
> 
> This patch adds a optional reset management for msdc.
> Sometimes the bootloader does not bring msdc register
> to default state, so need reset the msdc controller.
> 
> Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de>
> ---
>  drivers/mmc/host/mtk-sd.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 39e7fc54c438..2b243c03c9b2 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -22,6 +22,7 @@
>  #include <linux/slab.h>
>  #include <linux/spinlock.h>
>  #include <linux/interrupt.h>
> +#include <linux/reset.h>
>  
>  #include <linux/mmc/card.h>
>  #include <linux/mmc/core.h>
> @@ -434,6 +435,7 @@ struct msdc_host {
>  	struct msdc_save_para save_para; /* used when gate HCLK */
>  	struct msdc_tune_para def_tune_para; /* default tune setting */
>  	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> +	struct reset_control *reset;
>  };
>  
>  static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -1516,6 +1518,12 @@ static void msdc_init_hw(struct msdc_host *host)
>  	u32 val;
>  	u32 tune_reg = host->dev_comp->pad_tune_reg;
>  
> +	if (!IS_ERR(host->reset)) {
> +		reset_control_assert(host->reset);
> +		usleep_range(10, 50);
> +		reset_control_deassert(host->reset);
> +	}
> +
>  	/* Configure to MMC/SD mode, clock free running */
>  	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
>  
> @@ -2273,6 +2281,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
>  	if (IS_ERR(host->src_clk_cg))
>  		host->src_clk_cg = NULL;
>  
> +	host->reset = devm_reset_control_get_optional_exclusive(&pdev->dev,
> +								"hrst");
> +	if (PTR_ERR(host->reset) == -EPROBE_DEFER)
> +		return PTR_ERR(host->reset);
> +
>  	host->irq = platform_get_irq(pdev, 0);
>  	if (host->irq < 0) {
>  		ret = -EINVAL;
> -- 
> 2.18.0

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree.  Please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

Aw: [v2,3/3] mmc: mediatek: add optional module reset property

[Frank Wunderlich]

Hi,
it looks like you missed Philipps comments in v1

for stable i guess you need only add Cc: Stable-line to signed-off-area (not add it to CC of mail), sorry my mistake

Cc: stable@vger.kernel.org

regards Frank

Re: [v2,0/3] add optional reset property arm64: dts: mt7622: add reset node for mmc device mmc: mediatek: add optional module reset property Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 ++ drivers/mmc/host/mtk-sd.c | 13 +++++++++++++ 3 files changed, 17 insertions(+)

[Greg KH]

On Wed, Aug 12, 2020 at 09:01:26PM +0800, Wenbin Mei wrote:
> --
> 2.18.0

I think something is wrong with your subject line :(