From: Vincent Whitchurch <vincent.whitchurch@axis.com>
To: <jbaron@akamai.com>, <rostedt@goodmis.org>, <mingo@redhat.com>
Cc: <kernel@axis.com>, <corbet@lwn.net>, <pmladek@suse.com>,
<sergey.senozhatsky@gmail.com>, <john.ogness@linutronix.de>,
<linux-kernel@vger.kernel.org>,
Vincent Whitchurch <vincent.whitchurch@axis.com>
Subject: [PATCH v3 1/2] dynamic debug: split enable and printk flags
Date: Tue, 25 Aug 2020 17:33:37 +0200 [thread overview]
Message-ID: <20200825153338.17061-2-vincent.whitchurch@axis.com> (raw)
In-Reply-To: <20200825153338.17061-1-vincent.whitchurch@axis.com>
We're going to add support to allow dynamic debug locations to print to
a trace event, and that will make _DPRINTK_FLAGS_PRINT a bit ambiguous.
Will it mean printk(), or printing to the trace event, or any of the
two?
To make it clearer, split _DPRINTK_FLAGS_PRINT into two:
(1) _DPRINTK_FLAGS_PRINTK for turning on the printk() and
(2) _DPRINTK_FLAGS_ENABLE when checking if the dynamic debug location
is enabled.
_DPRINTK_FLAGS_ENABLE is currently just an alias of
_DPRINTK_FLAGS_PRINTK but will later also include a new flag for
enabling printing to the trace event.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
---
include/linux/dynamic_debug.h | 9 +++++----
lib/dynamic_debug.c | 8 ++++----
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index aa9ff9e1c0b3..738421898aac 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -27,13 +27,14 @@ struct _ddebug {
* writes commands to <debugfs>/dynamic_debug/control
*/
#define _DPRINTK_FLAGS_NONE 0
-#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */
+#define _DPRINTK_FLAGS_PRINTK (1<<0) /* printk() a message using the format */
#define _DPRINTK_FLAGS_INCL_MODNAME (1<<1)
#define _DPRINTK_FLAGS_INCL_FUNCNAME (1<<2)
#define _DPRINTK_FLAGS_INCL_LINENO (1<<3)
#define _DPRINTK_FLAGS_INCL_TID (1<<4)
+#define _DPRINTK_FLAGS_ENABLE _DPRINTK_FLAGS_PRINTK
#if defined DEBUG
-#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT
+#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINTK
#else
#define _DPRINTK_FLAGS_DEFAULT 0
#endif
@@ -111,10 +112,10 @@ void __dynamic_ibdev_dbg(struct _ddebug *descriptor,
#ifdef DEBUG
#define DYNAMIC_DEBUG_BRANCH(descriptor) \
- likely(descriptor.flags & _DPRINTK_FLAGS_PRINT)
+ likely(descriptor.flags & _DPRINTK_FLAGS_ENABLE)
#else
#define DYNAMIC_DEBUG_BRANCH(descriptor) \
- unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)
+ unlikely(descriptor.flags & _DPRINTK_FLAGS_ENABLE)
#endif
#endif
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 1d012e597cc3..88af85cb5222 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -84,7 +84,7 @@ static inline const char *trim_prefix(const char *path)
}
static struct { unsigned flag:8; char opt_char; } opt_array[] = {
- { _DPRINTK_FLAGS_PRINT, 'p' },
+ { _DPRINTK_FLAGS_PRINTK, 'p' },
{ _DPRINTK_FLAGS_INCL_MODNAME, 'm' },
{ _DPRINTK_FLAGS_INCL_FUNCNAME, 'f' },
{ _DPRINTK_FLAGS_INCL_LINENO, 'l' },
@@ -206,10 +206,10 @@ static int ddebug_change(const struct ddebug_query *query,
if (newflags == dp->flags)
continue;
#ifdef CONFIG_JUMP_LABEL
- if (dp->flags & _DPRINTK_FLAGS_PRINT) {
- if (!(modifiers->flags & _DPRINTK_FLAGS_PRINT))
+ if (dp->flags & _DPRINTK_FLAGS_ENABLE) {
+ if (!(modifiers->flags & _DPRINTK_FLAGS_ENABLE))
static_branch_disable(&dp->key.dd_key_true);
- } else if (modifiers->flags & _DPRINTK_FLAGS_PRINT)
+ } else if (modifiers->flags & _DPRINTK_FLAGS_ENABLE)
static_branch_enable(&dp->key.dd_key_true);
#endif
dp->flags = newflags;
--
2.28.0
next prev parent reply other threads:[~2020-08-25 15:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-25 15:33 [PATCH v3 0/2] Dynamic debug trace support Vincent Whitchurch
2020-08-25 15:33 ` Vincent Whitchurch [this message]
2020-08-25 15:33 ` [PATCH v3 2/2] dynamic debug: allow printing to trace event Vincent Whitchurch
2020-08-25 15:53 ` Joe Perches
2020-08-26 19:32 ` Steven Rostedt
2020-08-26 19:53 ` Joe Perches
2020-09-02 12:17 ` Vincent Whitchurch
2023-12-26 16:57 ` Guilherme G. Piccoli
2023-12-27 8:29 ` Vincent Whitchurch
2023-12-27 13:06 ` Guilherme G. Piccoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200825153338.17061-2-vincent.whitchurch@axis.com \
--to=vincent.whitchurch@axis.com \
--cc=corbet@lwn.net \
--cc=jbaron@akamai.com \
--cc=john.ogness@linutronix.de \
--cc=kernel@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pmladek@suse.com \
--cc=rostedt@goodmis.org \
--cc=sergey.senozhatsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®