From: Dan Murphy <dmurphy@ti.com>
To: <davem@davemloft.net>, <andrew@lunn.ch>, <f.fainelli@gmail.com>,
<hkallweit1@gmail.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net] net: phy: dp83867: Fix various styling and space issues
Date: Thu, 3 Sep 2020 09:15:10 -0500 [thread overview]
Message-ID: <20200903141510.20212-1-dmurphy@ti.com> (raw)
Fix spacing issues reported for misaligned switch..case and extra new
lines.
Also updated the file header to comply with networking commet style.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/net/phy/dp83867.c | 47 ++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 25 deletions(-)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index cd7032628a28..f182a8d767c6 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -1,6 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for the Texas Instruments DP83867 PHY
+/* Driver for the Texas Instruments DP83867 PHY
*
* Copyright (C) 2015 Texas Instruments Inc.
*/
@@ -35,7 +34,7 @@
#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5)
#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5)
-#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_2US BIT(5)
#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5)
#define DP83867_RGMIICTL 0x0032
@@ -113,7 +112,6 @@
#define DP83867_RGMII_RX_CLK_DELAY_SHIFT 0
#define DP83867_RGMII_RX_CLK_DELAY_INV (DP83867_RGMII_RX_CLK_DELAY_MAX + 1)
-
/* IO_MUX_CFG bits */
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK 0x1f
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
@@ -384,22 +382,22 @@ static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt)
DP83867_DOWNSHIFT_EN);
switch (cnt) {
- case DP83867_DOWNSHIFT_1_COUNT:
- count = DP83867_DOWNSHIFT_1_COUNT_VAL;
- break;
- case DP83867_DOWNSHIFT_2_COUNT:
- count = DP83867_DOWNSHIFT_2_COUNT_VAL;
- break;
- case DP83867_DOWNSHIFT_4_COUNT:
- count = DP83867_DOWNSHIFT_4_COUNT_VAL;
- break;
- case DP83867_DOWNSHIFT_8_COUNT:
- count = DP83867_DOWNSHIFT_8_COUNT_VAL;
- break;
- default:
- phydev_err(phydev,
- "Downshift count must be 1, 2, 4 or 8\n");
- return -EINVAL;
+ case DP83867_DOWNSHIFT_1_COUNT:
+ count = DP83867_DOWNSHIFT_1_COUNT_VAL;
+ break;
+ case DP83867_DOWNSHIFT_2_COUNT:
+ count = DP83867_DOWNSHIFT_2_COUNT_VAL;
+ break;
+ case DP83867_DOWNSHIFT_4_COUNT:
+ count = DP83867_DOWNSHIFT_4_COUNT_VAL;
+ break;
+ case DP83867_DOWNSHIFT_8_COUNT:
+ count = DP83867_DOWNSHIFT_8_COUNT_VAL;
+ break;
+ default:
+ phydev_err(phydev,
+ "Downshift count must be 1, 2, 4 or 8\n");
+ return -EINVAL;
}
val = DP83867_DOWNSHIFT_EN;
@@ -411,7 +409,7 @@ static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt)
}
static int dp83867_get_tunable(struct phy_device *phydev,
- struct ethtool_tunable *tuna, void *data)
+ struct ethtool_tunable *tuna, void *data)
{
switch (tuna->id) {
case ETHTOOL_PHY_DOWNSHIFT:
@@ -422,7 +420,7 @@ static int dp83867_get_tunable(struct phy_device *phydev,
}
static int dp83867_set_tunable(struct phy_device *phydev,
- struct ethtool_tunable *tuna, const void *data)
+ struct ethtool_tunable *tuna, const void *data)
{
switch (tuna->id) {
case ETHTOOL_PHY_DOWNSHIFT:
@@ -524,11 +522,10 @@ static int dp83867_of_init(struct phy_device *phydev)
dp83867->io_impedance = -1; /* leave at default */
dp83867->rxctrl_strap_quirk = of_property_read_bool(of_node,
- "ti,dp83867-rxctrl-strap-quirk");
+ "ti,dp83867-rxctrl-strap-quirk");
dp83867->sgmii_ref_clk_en = of_property_read_bool(of_node,
- "ti,sgmii-ref-clock-output-enable");
-
+ "ti,sgmii-ref-clock-output-enable");
dp83867->rx_id_delay = DP83867_RGMII_RX_CLK_DELAY_INV;
ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
--
2.28.0
next reply other threads:[~2020-09-03 14:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-03 14:15 Dan Murphy [this message]
2020-09-03 16:34 ` Florian Fainelli
2020-09-03 16:41 ` Dan Murphy
2020-09-03 16:51 ` Florian Fainelli
2020-09-03 16:54 ` Joe Perches
2020-09-03 20:42 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200903141510.20212-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®