From: "Clément Péron" <peron.clem@gmail.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: devicetree@vger.kernel.org,
"Jernej Skrabec" <jernej.skrabec@siol.net>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
"Takashi Iwai" <tiwai@suse.com>,
"Marcus Cooper" <codekipper@gmail.com>,
linux-sunxi@googlegroups.com,
linux-arm-kernel@lists.infradead.org,
"Clément Péron" <peron.clem@gmail.com>
Subject: [PATCH v2 05/20] ASoC: sun4i-i2s: Set sign extend sample
Date: Thu, 3 Sep 2020 22:30:19 +0200 [thread overview]
Message-ID: <20200903203034.1057334-6-peron.clem@gmail.com> (raw)
In-Reply-To: <20200903203034.1057334-1-peron.clem@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
On the newer SoCs such as the H3 and A64 this is set by default
to transfer a 0 after each sample in each slot. However the A10
and A20 SoCs that this driver was developed on had a default
setting where it padded the audio gain with zeros.
This isn't a problem while we have only support for 16bit audio
but with larger sample resolution rates in the pipeline then SEXT
bits should be cleared so that they also pad at the LSB. Without
this the audio gets distorted.
Set sign extend sample for all the sunxi generations even if they
are not affected. This will keep consistency and avoid relying on
default.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 1b4482b0f4af..13e64180e917 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -48,6 +48,9 @@
#define SUN4I_I2S_FMT0_FMT_I2S (0 << 0)
#define SUN4I_I2S_FMT1_REG 0x08
+#define SUN4I_I2S_FMT1_REG_SEXT_MASK BIT(8)
+#define SUN4I_I2S_FMT1_REG_SEXT(sext) ((sext) << 8)
+
#define SUN4I_I2S_FIFO_TX_REG 0x0c
#define SUN4I_I2S_FIFO_RX_REG 0x10
@@ -105,6 +108,9 @@
#define SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED (1 << 7)
#define SUN8I_I2S_FMT0_BCLK_POLARITY_NORMAL (0 << 7)
+#define SUN8I_I2S_FMT1_REG_SEXT_MASK GENMASK(5, 4)
+#define SUN8I_I2S_FMT1_REG_SEXT(sext) ((sext) << 4)
+
#define SUN8I_I2S_INT_STA_REG 0x0c
#define SUN8I_I2S_FIFO_TX_REG 0x20
@@ -671,6 +677,7 @@ static int sun4i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
}
regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
SUN4I_I2S_CTRL_MODE_MASK, val);
+
return 0;
}
@@ -767,6 +774,11 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
val);
+ /* Set sign extension to pad out LSB with 0 */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+ SUN8I_I2S_FMT1_REG_SEXT_MASK,
+ SUN8I_I2S_FMT1_REG_SEXT(0));
+
return 0;
}
@@ -863,6 +875,11 @@ static int sun50i_h6_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
val);
+ /* Set sign extension to pad out LSB with 0 */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+ SUN8I_I2S_FMT1_REG_SEXT_MASK,
+ SUN8I_I2S_FMT1_REG_SEXT(0));
+
return 0;
}
--
2.25.1
next prev parent reply other threads:[~2020-09-03 20:41 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-03 20:30 [PATCH v2 00/20] Add Allwinner H3/H5/H6/A64 HDMI audio Clément Péron
2020-09-03 20:30 ` [PATCH v2 01/20] Revert "ASoC: sun4i-i2s: Fix the LRCK polarity" Clément Péron
2020-09-03 20:57 ` Maxime Ripard
2020-09-03 20:30 ` [PATCH v2 02/20] ASoC: sun4i-i2s: Add support for H6 I2S Clément Péron
2020-09-04 3:16 ` Samuel Holland
2020-09-05 9:44 ` Clément Péron
2020-09-03 20:30 ` [PATCH v2 03/20] ASoC: sun4i-i2s: Adjust LRCLK width Clément Péron
2020-09-04 3:18 ` Samuel Holland
2020-09-03 20:30 ` [PATCH v2 04/20] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible Clément Péron
2020-09-03 20:30 ` Clément Péron [this message]
2020-09-03 20:30 ` [PATCH v2 06/20] ASoc: sun4i-i2s: Add 20 and 24 bit support Clément Péron
2020-09-03 20:30 ` [PATCH v2 07/20] ASoC: sun4i-i2s: Fix sun8i volatile regs Clément Péron
2020-09-03 20:30 ` [PATCH v2 08/20] arm64: dts: allwinner: h6: Add HDMI audio node Clément Péron
2020-09-03 20:30 ` [PATCH v2 09/20] arm64: dts: allwinner: h6: Enable HDMI sound for Beelink GS1 Clément Péron
2020-09-03 20:30 ` [PATCH v2 10/20] arm: dts: sunxi: h3/h5: Add DAI node for HDMI Clément Péron
2020-09-03 20:30 ` [PATCH v2 11/20] arm: dts: sunxi: h3/h5: Add HDMI audio Clément Péron
2020-09-03 20:30 ` [PATCH v2 12/20] arm64: dts: allwinner: a64: Add DAI node for HDMI Clément Péron
2020-09-03 20:30 ` [PATCH v2 13/20] arm64: dts: allwinner: a64: Add HDMI audio Clément Péron
2020-09-03 20:30 ` [PATCH v2 14/20] arm: sun8i: h3: Add HDMI audio to Orange Pi 2 Clément Péron
2020-09-03 20:30 ` [PATCH v2 15/20] arm: sun8i: h3: Add HDMI audio to Beelink X2 Clément Péron
2020-09-03 20:30 ` [PATCH v2 16/20] arm64: dts: allwinner: a64: Add HDMI audio to Pine64 Clément Péron
2020-09-03 20:30 ` [PATCH v2 17/20] arm64: dts: allwinner: Enable HDMI audio on Orange Pi PC 2 Clément Péron
2020-09-03 20:30 ` [PATCH v2 18/20] ARM: dts: sun8i-h3: Enable HDMI audio on Orange Pi PC/One Clément Péron
2020-09-03 20:30 ` [PATCH v2 19/20] arm64: dts: sun50i-h6-orangepi-3: Enable HDMI audio Clément Péron
2020-09-03 20:30 ` [PATCH v2 20/20] arm64: defconfig: Enable Allwinner i2s driver Clément Péron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200903203034.1057334-6-peron.clem@gmail.com \
--to=peron.clem@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=codekipper@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@siol.net \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®