[PATCH v5 5/6] dt-bindings: dw-apb-ictl: convert to json-schema

[Zhen Lei <thunder.leizhen@huawei.com>]

Convert the Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
binding to DT schema format using json-schema.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 .../interrupt-controller/snps,dw-apb-ictl.txt      | 43 -------------
 .../interrupt-controller/snps,dw-apb-ictl.yaml     | 75 ++++++++++++++++++++++
 2 files changed, 75 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
deleted file mode 100644
index 2db59df9408f4c6..000000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
-
-Synopsys DesignWare provides interrupt controller IP for APB known as
-dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
-controller in some SoCs, e.g. Hisilicon SD5203.
-
-Required properties:
-- compatible: shall be "snps,dw-apb-ictl"
-- reg: physical base address of the controller and length of memory mapped
-  region starting with ENABLE_LOW register
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
-
-Additional required property when it's used as secondary interrupt controller:
-- interrupts: interrupt reference to primary interrupt controller
-
-The interrupt sources map to the corresponding bits in the interrupt
-registers, i.e.
-- 0 maps to bit 0 of low interrupts,
-- 1 maps to bit 1 of low interrupts,
-- 32 maps to bit 0 of high interrupts,
-- 33 maps to bit 1 of high interrupts,
-- (optional) fast interrupts start at 64.
-
-Example:
-	/* dw_apb_ictl is used as secondary interrupt controller */
-	aic: interrupt-controller@3000 {
-		compatible = "snps,dw-apb-ictl";
-		reg = <0x3000 0xc00>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* dw_apb_ictl is used as primary interrupt controller */
-	vic: interrupt-controller@10130000 {
-		compatible = "snps,dw-apb-ictl";
-		reg = <0x10130000 0x1000>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
new file mode 100644
index 000000000000000..70c12979c843bf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+maintainers:
+  - Marc Zyngier <marc.zyngier@arm.com>
+
+description:
+  Synopsys DesignWare provides interrupt controller IP for APB known as
+  dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs
+  with APB bus, e.g. Marvell Armada 1500. It can also be used as primary
+  interrupt controller in some SoCs, e.g. Hisilicon SD5203.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-apb-ictl
+
+  interrupt-controller: true
+
+  reg:
+    description:
+      Physical base address of the controller and length of memory mapped
+      region starting with ENABLE_LOW register.
+
+  interrupts:
+    description:
+      Interrupt reference to primary interrupt controller.
+
+      The interrupt sources map to the corresponding bits in the interrupt
+      registers, i.e.
+      - 0 maps to bit 0 of low interrupts,
+      - 1 maps to bit 1 of low interrupts,
+      - 32 maps to bit 0 of high interrupts,
+      - 33 maps to bit 1 of high interrupts,
+      - (optional) fast interrupts start at 64.
+    minItems: 1
+    maxItems: 65
+
+  "#interrupt-cells":
+    description:
+      Number of cells to encode an interrupt-specifier.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    /* dw_apb_ictl is used as secondary interrupt controller */
+    aic: interrupt-controller@3000 {
+        compatible = "snps,dw-apb-ictl";
+        reg = <0x3000 0xc00>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 3 4>;
+    };
+
+    /* dw_apb_ictl is used as primary interrupt controller */
+    vic: interrupt-controller@10130000 {
+        compatible = "snps,dw-apb-ictl";
+        reg = <0x10130000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
-- 
1.8.3