mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] KVM: Enable hardware before doing arch VM initialization
@ 2020-09-23 18:57 Sean Christopherson
  2020-09-24  5:30 ` Christian Borntraeger
  2020-09-24  6:31 ` Huacai Chen
  0 siblings, 2 replies; 5+ messages in thread
From: Sean Christopherson @ 2020-09-23 18:57 UTC (permalink / raw)
  To: Paolo Bonzini
  Cc: kvm, linux-kernel, Marc Zyngier, James Morse, Julien Thierry,
	Suzuki K Poulose, linux-arm-kernel, Huacai Chen,
	Aleksandar Markovic, linux-mips, Paul Mackerras, kvm-ppc,
	Christian Borntraeger, Janosch Frank, David Hildenbrand,
	Cornelia Huck, Claudio Imbrenda, Vitaly Kuznetsov, Wanpeng Li,
	Jim Mattson, Joerg Roedel, Sean Christopherson

Swap the order of hardware_enable_all() and kvm_arch_init_vm() to
accommodate Intel's Trust Domain Extension (TDX), which needs VMX to be
fully enabled during VM init in order to make SEAMCALLs.

This also provides consistent ordering between kvm_create_vm() and
kvm_destroy_vm() with respect to calling kvm_arch_destroy_vm() and
hardware_disable_all().

Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: kvm-ppc@vger.kernel.org
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---

Obviously not required until the TDX series comes along, but IMO KVM
should be consistent with respect to enabling and disabling virt support
in hardware.

Tested only on Intel hardware.  Unless I missed something, this only
affects x86, Arm and MIPS as hardware enabling is a nop for s390 and PPC.
Arm looks safe (based on my mostly clueless reading of the code), but I
have no idea if this will cause problem for MIPS, which is doing all kinds
of things in hardware_enable() that I don't pretend to fully understand.

 virt/kvm/kvm_main.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index cf88233b819a..58fa19bcfc90 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -766,7 +766,7 @@ static struct kvm *kvm_create_vm(unsigned long type)
 		struct kvm_memslots *slots = kvm_alloc_memslots();
 
 		if (!slots)
-			goto out_err_no_arch_destroy_vm;
+			goto out_err_no_disable;
 		/* Generations must be different for each address space. */
 		slots->generation = i;
 		rcu_assign_pointer(kvm->memslots[i], slots);
@@ -776,19 +776,19 @@ static struct kvm *kvm_create_vm(unsigned long type)
 		rcu_assign_pointer(kvm->buses[i],
 			kzalloc(sizeof(struct kvm_io_bus), GFP_KERNEL_ACCOUNT));
 		if (!kvm->buses[i])
-			goto out_err_no_arch_destroy_vm;
+			goto out_err_no_disable;
 	}
 
 	kvm->max_halt_poll_ns = halt_poll_ns;
 
-	r = kvm_arch_init_vm(kvm, type);
-	if (r)
-		goto out_err_no_arch_destroy_vm;
-
 	r = hardware_enable_all();
 	if (r)
 		goto out_err_no_disable;
 
+	r = kvm_arch_init_vm(kvm, type);
+	if (r)
+		goto out_err_no_arch_destroy_vm;
+
 #ifdef CONFIG_HAVE_KVM_IRQFD
 	INIT_HLIST_HEAD(&kvm->irq_ack_notifier_list);
 #endif
@@ -815,10 +815,10 @@ static struct kvm *kvm_create_vm(unsigned long type)
 		mmu_notifier_unregister(&kvm->mmu_notifier, current->mm);
 #endif
 out_err_no_mmu_notifier:
-	hardware_disable_all();
-out_err_no_disable:
 	kvm_arch_destroy_vm(kvm);
 out_err_no_arch_destroy_vm:
+	hardware_disable_all();
+out_err_no_disable:
 	WARN_ON_ONCE(!refcount_dec_and_test(&kvm->users_count));
 	for (i = 0; i < KVM_NR_BUSES; i++)
 		kfree(kvm_get_bus(kvm, i));
-- 
2.28.0


^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-09-24  7:45 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-23 18:57 [PATCH] KVM: Enable hardware before doing arch VM initialization Sean Christopherson
2020-09-24  5:30 ` Christian Borntraeger
2020-09-24  6:31 ` Huacai Chen
2020-09-24  6:50   ` Paolo Bonzini
2020-09-24  7:45     ` Huacai Chen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®