mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nm@ti.com>, <t-kristo@ti.com>, <ssantosh@kernel.org>,
	<lokeshvutla@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <grygorii.strashko@ti.com>
Subject: [PATCH v2 01/11] firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel
Date: Thu, 8 Oct 2020 14:52:14 +0300	[thread overview]
Message-ID: <20201008115224.1591-2-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20201008115224.1591-1-peter.ujfalusi@ti.com>

The system controller's resource manager have support for configuring the
TDTYPE of TCHAN_CFG register on j721e.
With this parameter the teardown completion can be controlled:
TDTYPE == 0: Return without waiting for peer to complete the teardown
TDTYPE == 1: Wait for peer to complete the teardown

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/firmware/ti_sci.c              | 1 +
 drivers/firmware/ti_sci.h              | 7 +++++++
 include/linux/soc/ti/ti_sci_protocol.h | 2 ++
 3 files changed, 10 insertions(+)

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 896f53ec7857..65a8c2e82093 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -2362,6 +2362,7 @@ static int ti_sci_cmd_rm_udmap_tx_ch_cfg(const struct ti_sci_handle *handle,
 	req->fdepth = params->fdepth;
 	req->tx_sched_priority = params->tx_sched_priority;
 	req->tx_burst_size = params->tx_burst_size;
+	req->tx_tdtype = params->tx_tdtype;
 
 	ret = ti_sci_do_xfer(info, xfer);
 	if (ret) {
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 57cd04062994..dca19ca5fc49 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -910,6 +910,7 @@ struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
  *   12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count
  *   13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
  *   14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size
+ *   15 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_tdtype
  *
  * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
  *
@@ -973,6 +974,11 @@ struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
  *
  * @tx_burst_size: UDMAP transmit channel burst size configuration to be
  * programmed into the tx_burst_size field of the TCHAN_TCFG register.
+ *
+ * @tx_tdtype: UDMAP transmit channel teardown type configuration to be
+ * programmed into the tdtype field of the TCHAN_TCFG register:
+ * 0 - Return immediately
+ * 1 - Wait for completion message from remote peer
  */
 struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
 	struct ti_sci_msg_hdr hdr;
@@ -994,6 +1000,7 @@ struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
 	u16 fdepth;
 	u8 tx_sched_priority;
 	u8 tx_burst_size;
+	u8 tx_tdtype;
 } __packed;
 
 /**
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index cf27b080e148..d254d99fd45b 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -345,6 +345,7 @@ struct ti_sci_msg_rm_udmap_tx_ch_cfg {
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID        BIT(11)
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID      BIT(12)
 #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID            BIT(13)
+#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID            BIT(15)
 	u16 nav_id;
 	u16 index;
 	u8 tx_pause_on_err;
@@ -362,6 +363,7 @@ struct ti_sci_msg_rm_udmap_tx_ch_cfg {
 	u16 fdepth;
 	u8 tx_sched_priority;
 	u8 tx_burst_size;
+	u8 tx_tdtype;
 };
 
 /**
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


  reply	other threads:[~2020-10-08 11:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-08 11:52 [PATCH v2 00/11] firmware/soc: ti_sci, ringacc/inta: Preparation for AM64 DMA support Peter Ujfalusi
2020-10-08 11:52 ` Peter Ujfalusi [this message]
2020-10-08 11:52 ` [PATCH v2 02/11] firmware: ti_sci: Use struct ti_sci_resource_desc in get_range ops Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 03/11] firmware: ti_sci: rm: Add support for second resource range Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 04/11] soc: ti: ti_sci_inta_msi: Add support for second range in resource ranges Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 05/11] firmware: ti_sci: rm: Add support for extended_ch_type for tx channel Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 06/11] firmware: ti_sci: rm: Remove ring_get_config support Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 07/11] firmware: ti_sci: rm: Add new ops for ring configuration Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 08/11] soc: ti: k3-ringacc: Use the ti_sci set_cfg callback " Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 09/11] firmware: ti_sci: rm: Remove unused config() from ti_sci_rm_ringacc_ops Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 10/11] soc: ti: k3-ringacc: Use correct device for allocation in RING mode Peter Ujfalusi
2020-10-09  3:02   ` Nishanth Menon
2020-10-09  7:43     ` Peter Ujfalusi
2020-10-09 11:59       ` Nishanth Menon
2020-10-09 12:10         ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 11/11] soc: ti: k3-socinfo: Add entry for AM64X SoC family Peter Ujfalusi
2020-10-09  0:54 ` [PATCH v2 00/11] firmware/soc: ti_sci, ringacc/inta: Preparation for AM64 DMA support santosh.shilimkar
2020-10-09  0:56 ` santosh.shilimkar
2020-10-09  8:08   ` Peter Ujfalusi
2020-11-02  3:44   ` santosh.shilimkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201008115224.1591-2-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®