[PATCH 1/2] drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()

[PATCH 1/2] drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()

[Lyude Paul]

Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 36 ++++++---------------
 drivers/gpu/drm/nouveau/nouveau_dp.c        | 15 ++++++---
 2 files changed, 20 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 7674025a4bfe8..1d91d52ee5083 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -1035,29 +1035,6 @@ get_tmds_link_bandwidth(struct drm_connector *connector)
 		return 112000 * duallink_scale;
 }
 
-enum drm_mode_status
-nouveau_conn_mode_clock_valid(const struct drm_display_mode *mode,
-			      const unsigned min_clock,
-			      const unsigned max_clock,
-			      unsigned int *clock_out)
-{
-	unsigned int clock = mode->clock;
-
-	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) ==
-	    DRM_MODE_FLAG_3D_FRAME_PACKING)
-		clock *= 2;
-
-	if (clock < min_clock)
-		return MODE_CLOCK_LOW;
-	if (clock > max_clock)
-		return MODE_CLOCK_HIGH;
-
-	if (clock_out)
-		*clock_out = clock;
-
-	return MODE_OK;
-}
-
 static enum drm_mode_status
 nouveau_connector_mode_valid(struct drm_connector *connector,
 			     struct drm_display_mode *mode)
@@ -1065,7 +1042,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
-	unsigned min_clock = 25000, max_clock = min_clock;
+	unsigned int min_clock = 25000, max_clock = min_clock, clock = mode->clock;
 
 	switch (nv_encoder->dcb->type) {
 	case DCB_OUTPUT_LVDS:
@@ -1094,8 +1071,15 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
 		return MODE_BAD;
 	}
 
-	return nouveau_conn_mode_clock_valid(mode, min_clock, max_clock,
-					     NULL);
+	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
+		clock *= 2;
+
+	if (clock < min_clock)
+		return MODE_CLOCK_LOW;
+	if (clock > max_clock)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
 }
 
 static struct drm_encoder *
diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index 8a0f7994e1aeb..40683e1244c3f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -114,18 +114,23 @@ nv50_dp_mode_valid(struct drm_connector *connector,
 		   unsigned *out_clock)
 {
 	const unsigned min_clock = 25000;
-	unsigned max_clock, clock;
-	enum drm_mode_status ret;
+	unsigned max_clock, clock = mode->clock;
 
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace)
 		return MODE_NO_INTERLACE;
 
+	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
+		clock *= 2;
+
 	max_clock = outp->dp.link_nr * outp->dp.link_bw;
 	clock = mode->clock * (connector->display_info.bpc * 3) / 10;
+	if (clock < min_clock)
+		return MODE_CLOCK_LOW;
+	if (clock > max_clock)
+		return MODE_CLOCK_HIGH;
 
-	ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock,
-					    &clock);
 	if (out_clock)
 		*out_clock = clock;
-	return ret;
+
+	return MODE_OK;
 }
-- 
2.28.0

[PATCH 2/2] drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()

[Lyude Paul]

While I thought I had this correct (since it actually did reject modes
like I expected during testing), Ville Syrjala from Intel pointed out
that the logic here isn't correct. max_clock refers to the max data rate
supported by the DP encoder. So, limiting it to the output of ds_clock (which
refers to the maximum dotclock of the downstream DP device) doesn't make any
sense. Additionally, since we're using the connector's bpc as the canonical BPC
we should use this in mode_valid until we support dynamically setting the bpp
based on bandwidth constraints.

https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html

For more info.

So, let's rewrite this using Ville's advice.

Changes made for stable backport:
* 5.9 didn't use drm_dp_downstream_max_dotclock() yet, so remove that (the
  fix is still important regardless)

v2:
* Ville pointed out I mixed up the dotclock and the link rate. So fix that...
* ...and also rename all the variables in this function to be more appropriately
  labeled so I stop mixing them up.
* Reuse the bpp from the connector for now until we have dynamic bpp selection.
* Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we
  should also have been doing from the start

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_dp.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index 40683e1244c3f..9c06d1cc43905 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -114,7 +114,8 @@ nv50_dp_mode_valid(struct drm_connector *connector,
 		   unsigned *out_clock)
 {
 	const unsigned min_clock = 25000;
-	unsigned max_clock, clock = mode->clock;
+	unsigned int max_rate, mode_rate, clock = mode->clock;
+	const u8 bpp = connector->display_info.bpc * 3;
 
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace)
 		return MODE_NO_INTERLACE;
@@ -122,12 +123,13 @@ nv50_dp_mode_valid(struct drm_connector *connector,
 	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
 		clock *= 2;
 
-	max_clock = outp->dp.link_nr * outp->dp.link_bw;
-	clock = mode->clock * (connector->display_info.bpc * 3) / 10;
+	max_rate = outp->dp.link_nr * outp->dp.link_bw;
+	mode_rate = DIV_ROUND_UP(clock * bpp, 8);
+	if (mode_rate > max_rate)
+		return MODE_CLOCK_HIGH;
+
 	if (clock < min_clock)
 		return MODE_CLOCK_LOW;
-	if (clock > max_clock)
-		return MODE_CLOCK_HIGH;
 
 	if (out_clock)
 		*out_clock = clock;
-- 
2.28.0