[PATCH v2 1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport

[Jim Quinlan <james.quinlan@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 1348 bytes --]

In normal use of smc/hvc transport in SCMI the message completion is
indicated by the return of the SMC call.  This commit provides for an
optional interrupt named "message-serviced" which is used instead to
indicate the completion of a message.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index 55deb68230eb..7cdad11f40b1 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -31,6 +31,14 @@ Optional properties:
 
 - mbox-names: shall be "tx" or "rx" depending on mboxes entries.
 
+- interrupts : when using smc or hvc transports, this optional
+	 property indicates that msg completion by the platform is indicated
+	 by an interrupt rather than by the return of the smc call. This
+	 should not be used except when the platform requires such behavior.
+
+- interrupt-names : if "interrupts" is present, interrupt-names must also
+	 be present and have the value "message-serviced".
+
 See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
 about the generic mailbox controller and client driver bindings.
 
-- 
2.17.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4167 bytes --]