From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 3/6] arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES
Date: Thu, 10 Dec 2020 18:37:44 +0530 [thread overview]
Message-ID: <20201210130747.25436-4-kishon@ti.com> (raw)
In-Reply-To: <20201210130747.25436-1-kishon@ti.com>
Add dt node for the single instance of WIZ and SERDES module
shared by PCIe, CPSW (SGMII/QSGMII) and USB.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 61 +++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index b0094212aa82..ae5abf59a7d4 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -531,6 +531,67 @@
dma-coherent;
};
+ serdes_refclk: serdes_refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ serdes_wiz0: wiz@5060000 {
+ compatible = "ti,j721e-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+ assigned-clocks = <&k3_clks 292 85>;
+ assigned-clock-parents = <&k3_clks 292 89>;
+
+ wiz0_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_pll0_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_pll1_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_refclk_dig";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz0_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ serdes0: serdes@5060000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05060000 0x00010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&wiz0_pll0_refclk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
usbss0: cdns-usb@4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;
--
2.17.1
next prev parent reply other threads:[~2020-12-10 13:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 13:07 [PATCH v2 0/6] PCI: J7200/J721E PCIe bindings Kishon Vijay Abraham I
2020-12-10 13:07 ` [PATCH v2 1/6] arm64: dts: ti: k3-j721e-main: Fix supported max outbound regions Kishon Vijay Abraham I
2020-12-10 13:07 ` [PATCH v2 2/6] arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes added for pcieX_ctrl Kishon Vijay Abraham I
2020-12-10 13:07 ` Kishon Vijay Abraham I [this message]
2020-12-10 13:07 ` [PATCH v2 4/6] arm64: dts: ti: k3-j7200-main: Add PCIe device tree node Kishon Vijay Abraham I
2020-12-10 13:07 ` [PATCH v2 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0 Kishon Vijay Abraham I
2020-12-10 13:07 ` [PATCH v2 6/6] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201210130747.25436-4-kishon@ti.com \
--to=kishon@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®