* [PATCH] power/reset: remove zte zx driver
@ 2021-01-20 15:08 Arnd Bergmann
2021-01-28 0:18 ` Sebastian Reichel
0 siblings, 1 reply; 2+ messages in thread
From: Arnd Bergmann @ 2021-01-20 15:08 UTC (permalink / raw)
To: Sebastian Reichel
Cc: Arnd Bergmann, Jun Nie, Shawn Guo, linux-kernel, linux-pm
From: Arnd Bergmann <arnd@arndb.de>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/power/reset/Kconfig | 7 ---
drivers/power/reset/Makefile | 1 -
drivers/power/reset/zx-reboot.c | 86 ---------------------------------
3 files changed, 94 deletions(-)
delete mode 100644 drivers/power/reset/zx-reboot.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index b22c4fdb2561..0376a90bec09 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -251,13 +251,6 @@ config POWER_RESET_RMOBILE
help
Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
-config POWER_RESET_ZX
- tristate "ZTE SoCs reset driver"
- depends on ARCH_ZX || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Reboot support for ZTE SoCs.
-
config REBOOT_MODE
tristate
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 9dc49d3a57ff..46331119c886 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
-obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
diff --git a/drivers/power/reset/zx-reboot.c b/drivers/power/reset/zx-reboot.c
deleted file mode 100644
index 457950833dba..000000000000
--- a/drivers/power/reset/zx-reboot.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ZTE zx296702 SoC reset code
- *
- * Copyright (c) 2015 Linaro Ltd.
- *
- * Author: Jun Nie <jun.nie@linaro.org>
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-
-static void __iomem *base;
-static void __iomem *pcu_base;
-
-static int zx_restart_handler(struct notifier_block *this,
- unsigned long mode, void *cmd)
-{
- writel_relaxed(1, base + 0xb0);
- writel_relaxed(1, pcu_base + 0x34);
-
- mdelay(50);
- pr_emerg("Unable to restart system\n");
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block zx_restart_nb = {
- .notifier_call = zx_restart_handler,
- .priority = 128,
-};
-
-static int zx_reboot_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- int err;
-
- base = of_iomap(np, 0);
- if (!base) {
- WARN(1, "failed to map base address");
- return -ENODEV;
- }
-
- np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
- pcu_base = of_iomap(np, 0);
- of_node_put(np);
- if (!pcu_base) {
- iounmap(base);
- WARN(1, "failed to map pcu_base address");
- return -ENODEV;
- }
-
- err = register_restart_handler(&zx_restart_nb);
- if (err) {
- iounmap(base);
- iounmap(pcu_base);
- dev_err(&pdev->dev, "Register restart handler failed(err=%d)\n",
- err);
- }
-
- return err;
-}
-
-static const struct of_device_id zx_reboot_of_match[] = {
- { .compatible = "zte,sysctrl" },
- {}
-};
-MODULE_DEVICE_TABLE(of, zx_reboot_of_match);
-
-static struct platform_driver zx_reboot_driver = {
- .probe = zx_reboot_probe,
- .driver = {
- .name = "zx-reboot",
- .of_match_table = zx_reboot_of_match,
- },
-};
-module_platform_driver(zx_reboot_driver);
-
-MODULE_DESCRIPTION("ZTE SoCs reset driver");
-MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
-MODULE_LICENSE("GPL v2");
--
2.29.2
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] power/reset: remove zte zx driver
2021-01-20 15:08 [PATCH] power/reset: remove zte zx driver Arnd Bergmann
@ 2021-01-28 0:18 ` Sebastian Reichel
0 siblings, 0 replies; 2+ messages in thread
From: Sebastian Reichel @ 2021-01-28 0:18 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: Arnd Bergmann, Jun Nie, Shawn Guo, linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 4284 bytes --]
Hi,
On Wed, Jan 20, 2021 at 04:08:26PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The zte zx platform is getting removed, so this driver is no
> longer needed.
>
> Cc: Jun Nie <jun.nie@linaro.org>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Thanks, queued.
-- Sebastian
> drivers/power/reset/Kconfig | 7 ---
> drivers/power/reset/Makefile | 1 -
> drivers/power/reset/zx-reboot.c | 86 ---------------------------------
> 3 files changed, 94 deletions(-)
> delete mode 100644 drivers/power/reset/zx-reboot.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index b22c4fdb2561..0376a90bec09 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -251,13 +251,6 @@ config POWER_RESET_RMOBILE
> help
> Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
>
> -config POWER_RESET_ZX
> - tristate "ZTE SoCs reset driver"
> - depends on ARCH_ZX || COMPILE_TEST
> - depends on HAS_IOMEM
> - help
> - Reboot support for ZTE SoCs.
> -
> config REBOOT_MODE
> tristate
>
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 9dc49d3a57ff..46331119c886 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -29,7 +29,6 @@ obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
> obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
> obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
> obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
> -obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
> obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
> obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
> obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
> diff --git a/drivers/power/reset/zx-reboot.c b/drivers/power/reset/zx-reboot.c
> deleted file mode 100644
> index 457950833dba..000000000000
> --- a/drivers/power/reset/zx-reboot.c
> +++ /dev/null
> @@ -1,86 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * ZTE zx296702 SoC reset code
> - *
> - * Copyright (c) 2015 Linaro Ltd.
> - *
> - * Author: Jun Nie <jun.nie@linaro.org>
> - */
> -
> -#include <linux/delay.h>
> -#include <linux/io.h>
> -#include <linux/module.h>
> -#include <linux/notifier.h>
> -#include <linux/of_address.h>
> -#include <linux/platform_device.h>
> -#include <linux/reboot.h>
> -
> -static void __iomem *base;
> -static void __iomem *pcu_base;
> -
> -static int zx_restart_handler(struct notifier_block *this,
> - unsigned long mode, void *cmd)
> -{
> - writel_relaxed(1, base + 0xb0);
> - writel_relaxed(1, pcu_base + 0x34);
> -
> - mdelay(50);
> - pr_emerg("Unable to restart system\n");
> -
> - return NOTIFY_DONE;
> -}
> -
> -static struct notifier_block zx_restart_nb = {
> - .notifier_call = zx_restart_handler,
> - .priority = 128,
> -};
> -
> -static int zx_reboot_probe(struct platform_device *pdev)
> -{
> - struct device_node *np = pdev->dev.of_node;
> - int err;
> -
> - base = of_iomap(np, 0);
> - if (!base) {
> - WARN(1, "failed to map base address");
> - return -ENODEV;
> - }
> -
> - np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
> - pcu_base = of_iomap(np, 0);
> - of_node_put(np);
> - if (!pcu_base) {
> - iounmap(base);
> - WARN(1, "failed to map pcu_base address");
> - return -ENODEV;
> - }
> -
> - err = register_restart_handler(&zx_restart_nb);
> - if (err) {
> - iounmap(base);
> - iounmap(pcu_base);
> - dev_err(&pdev->dev, "Register restart handler failed(err=%d)\n",
> - err);
> - }
> -
> - return err;
> -}
> -
> -static const struct of_device_id zx_reboot_of_match[] = {
> - { .compatible = "zte,sysctrl" },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, zx_reboot_of_match);
> -
> -static struct platform_driver zx_reboot_driver = {
> - .probe = zx_reboot_probe,
> - .driver = {
> - .name = "zx-reboot",
> - .of_match_table = zx_reboot_of_match,
> - },
> -};
> -module_platform_driver(zx_reboot_driver);
> -
> -MODULE_DESCRIPTION("ZTE SoCs reset driver");
> -MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
> -MODULE_LICENSE("GPL v2");
> --
> 2.29.2
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-01-28 0:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-20 15:08 [PATCH] power/reset: remove zte zx driver Arnd Bergmann
2021-01-28 0:18 ` Sebastian Reichel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome