mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
To: <andrew@lunn.ch>, <olteanv@gmail.com>, <netdev@vger.kernel.org>,
	<robh+dt@kernel.org>
Cc: <kuba@kernel.org>, <vivien.didelot@gmail.com>,
	<f.fainelli@gmail.com>, <davem@davemloft.net>,
	<UNGLinuxDriver@microchip.com>, <Woojung.Huh@microchip.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH net-next 7/8] net: dsa: microchip: add support for fdb and mdb management
Date: Thu, 28 Jan 2021 12:11:11 +0530	[thread overview]
Message-ID: <20210128064112.372883-8-prasanna.vengateshan@microchip.com> (raw)
In-Reply-To: <20210128064112.372883-1-prasanna.vengateshan@microchip.com>

Support for fdb_add, mdb_add, fdb_del, mdb_del and
fdb_dump operations

It aligns with latest update of removing switchdev
transactional logic from mdb entries

Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
---
 drivers/net/dsa/microchip/lan937x_main.c | 424 +++++++++++++++++++++++
 1 file changed, 424 insertions(+)

diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index aa2efa4e5823..cd902addce3f 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -14,6 +14,42 @@
 #include "ksz_common.h"
 #include "lan937x_dev.h"
 
+static void lan937x_read_table(struct ksz_device *dev, u32 *table)
+{
+	/* read alu table */
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+	ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+	ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+	ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void lan937x_write_table(struct ksz_device *dev, u32 *table)
+{
+	/* write alu table */
+	ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+	ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+	ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+	ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int lan937x_wait_alu_ready(int alu, struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL(alu),
+					val, !(val & ALU_START), 10, 1000);
+}
+
+static int lan937x_wait_alu_sta_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[2],
+					REG_SW_ALU_STAT_CTRL__4,
+					val, !(val & ALU_STAT_START),
+					10, 1000);
+}
+
 static enum dsa_tag_protocol lan937x_get_tag_protocol(struct dsa_switch *ds,
 						      int port,
 						      enum dsa_tag_protocol mp)
@@ -162,6 +198,389 @@ static void lan937x_port_stp_state_set(struct dsa_switch *ds, int port,
 	mutex_unlock(&dev->dev_mutex);
 }
 
+static u8 lan937x_get_fid(u16 vid)
+{
+	if (vid > ALU_FID_SIZE)
+		return LAN937X_GET_FID(vid);
+	else
+		return vid;
+}
+
+static int lan937x_port_fdb_add(struct dsa_switch *ds, int port,
+				const unsigned char *addr, u16 vid)
+{
+	struct ksz_device *dev = ds->priv;
+	u8 fid = lan937x_get_fid(vid);
+	u32 alu_table[4];
+	int ret, i;
+	u32 data;
+	u8 val;
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (i = 0; i < ALU_STA_DYN_CNT; i++) {
+		/* find any entry with mac & fid */
+		data = fid << ALU_FID_INDEX_S;
+		data |= ((addr[0] << 8) | addr[1]);
+		ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+		data = ((addr[2] << 24) | (addr[3] << 16));
+		data |= ((addr[4] << 8) | addr[5]);
+		ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+		/* start read operation */
+		ksz_write32(dev, REG_SW_ALU_CTRL(i), ALU_READ | ALU_START);
+
+		/* wait to be finished */
+		ret = lan937x_wait_alu_ready(i, dev);
+		if (ret) {
+			dev_err(dev->dev, "Failed to read ALU\n");
+			goto exit;
+		}
+
+		/* read ALU entry */
+		lan937x_read_table(dev, alu_table);
+
+		/* update ALU entry */
+		alu_table[0] = ALU_V_STATIC_VALID;
+
+		/* update port number */
+		alu_table[1] |= BIT(port);
+
+		if (fid)
+			alu_table[1] |= ALU_V_USE_FID;
+		alu_table[2] = (fid << ALU_V_FID_S);
+		alu_table[2] |= ((addr[0] << 8) | addr[1]);
+		alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+		alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+		lan937x_write_table(dev, alu_table);
+
+		ksz_write32(dev, REG_SW_ALU_CTRL(i), ALU_WRITE | ALU_START);
+
+		/* wait to be finished */
+		ret = lan937x_wait_alu_ready(i, dev);
+
+		if (ret)
+			dev_err(dev->dev, "Failed to write ALU\n");
+
+		ksz_read8(dev, REG_SW_LUE_INT_STATUS__1, &val);
+
+		/* ALU write failed */
+		if (val & WRITE_FAIL_INT && i == 1)
+			dev_err(dev->dev, "Failed to write ALU\n");
+
+		/* ALU1 write failed and attempt to write ALU2, otherwise exit*/
+		if (val & WRITE_FAIL_INT)
+			val = WRITE_FAIL_INT;
+		else
+			goto exit;
+	}
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static int lan937x_port_fdb_del(struct dsa_switch *ds, int port,
+				const unsigned char *addr, u16 vid)
+{
+	struct ksz_device *dev = ds->priv;
+	u8 fid = lan937x_get_fid(vid);
+	u32 alu_table[4];
+	int ret, i;
+	u32 data;
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (i = 0; i < ALU_STA_DYN_CNT; i++) {
+		/* read any entry with mac & fid */
+		data = fid << ALU_FID_INDEX_S;
+		data |= ((addr[0] << 8) | addr[1]);
+		ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+		data = ((addr[2] << 24) | (addr[3] << 16));
+		data |= ((addr[4] << 8) | addr[5]);
+		ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+		/* start read operation */
+		ksz_write32(dev, REG_SW_ALU_CTRL(i), ALU_READ | ALU_START);
+
+		/* wait to be finished */
+		ret = lan937x_wait_alu_ready(i, dev);
+		if (ret) {
+			dev_err(dev->dev, "Failed to read ALU\n");
+			goto exit;
+		}
+
+		ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+		if (alu_table[0] & ALU_V_STATIC_VALID) {
+			ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+			ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+			ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+			/* clear forwarding port */
+			alu_table[1] &= ~BIT(port);
+
+			/* if there is no port to forward, clear table */
+			if ((alu_table[1] & ALU_V_PORT_MAP) == 0) {
+				alu_table[0] = 0;
+				alu_table[1] = 0;
+				alu_table[2] = 0;
+				alu_table[3] = 0;
+			}
+		} else {
+			alu_table[0] = 0;
+			alu_table[1] = 0;
+			alu_table[2] = 0;
+			alu_table[3] = 0;
+		}
+
+		lan937x_write_table(dev, alu_table);
+
+		ksz_write32(dev, REG_SW_ALU_CTRL(i), ALU_WRITE | ALU_START);
+
+		/* wait to be finished */
+		ret = lan937x_wait_alu_ready(i, dev);
+		if (ret)
+			dev_err(dev->dev, "Failed to write ALU\n");
+	}
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static void lan937x_convert_alu(struct lan_alu_struct *alu, u32 *alu_table)
+{
+	alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+	alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+	alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+	alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+			ALU_V_PRIO_AGE_CNT_M;
+	alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+	alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+	alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+	alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+	alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+	alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+	alu->mac[1] = alu_table[2] & 0xFF;
+	alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+	alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+	alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+	alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int lan937x_port_fdb_dump(struct dsa_switch *ds, int port,
+				 dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct ksz_device *dev = ds->priv;
+	struct lan_alu_struct alu;
+	u32 lan937x_data;
+	u32 alu_table[4];
+	int ret, i;
+	int timeout;
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (i = 0; i < ALU_STA_DYN_CNT; i++) {
+		/* start ALU search */
+		ksz_write32(dev, REG_SW_ALU_CTRL(i), ALU_START | ALU_SEARCH);
+
+		do {
+			timeout = 1000;
+			do {
+				ksz_read32(dev, REG_SW_ALU_CTRL(i), &lan937x_data);
+				if ((lan937x_data & ALU_VALID) || !(lan937x_data & ALU_START))
+					break;
+				usleep_range(1, 10);
+			} while (timeout-- > 0);
+
+			if (!timeout) {
+				dev_err(dev->dev, "Failed to search ALU\n");
+				ret = -ETIMEDOUT;
+				goto exit;
+			}
+
+			/* read ALU table */
+			lan937x_read_table(dev, alu_table);
+
+			lan937x_convert_alu(&alu, alu_table);
+
+			if (alu.port_forward & BIT(port)) {
+				ret = cb(alu.mac, alu.fid, alu.is_static, data);
+				if (ret)
+					goto exit;
+			}
+		} while (lan937x_data & ALU_START);
+
+exit:
+			/* stop ALU search & continue to next ALU if available */
+			ksz_write32(dev, REG_SW_ALU_CTRL(i), 0);
+	}
+
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static int lan937x_port_mdb_add(struct dsa_switch *ds, int port,
+				const struct switchdev_obj_port_mdb *mdb)
+{
+	struct ksz_device *dev = ds->priv;
+	u8 fid = lan937x_get_fid(mdb->vid);
+	u32 static_table[4];
+	u32 mac_hi, mac_lo;
+	int err = 0;
+	int index;
+	u32 data;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << ALU_STAT_INDEX_S) |
+			ALU_STAT_READ | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		err = lan937x_wait_alu_sta_ready(dev);
+		if (err) {
+			dev_err(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		lan937x_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same fid & mac address */
+			if (((static_table[2] >> ALU_V_FID_S) == fid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		} else {
+			/* found empty one */
+			break;
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->num_statics) {
+		err = -ENOSPC;
+		goto exit;
+	}
+
+	/* add entry */
+	static_table[0] = ALU_V_STATIC_VALID;
+
+	static_table[1] |= BIT(port);
+	if (fid)
+		static_table[1] |= ALU_V_USE_FID;
+	static_table[2] = (fid << ALU_V_FID_S);
+	static_table[2] |= mac_hi;
+	static_table[3] = mac_lo;
+
+	lan937x_write_table(dev, static_table);
+
+	data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	if (lan937x_wait_alu_sta_ready(dev))
+		dev_err(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+	return err;
+}
+
+static int lan937x_port_mdb_del(struct dsa_switch *ds, int port,
+				const struct switchdev_obj_port_mdb *mdb)
+{
+	struct ksz_device *dev = ds->priv;
+	u8 fid = lan937x_get_fid(mdb->vid);
+	u32 static_table[4];
+	u32 mac_hi, mac_lo;
+	int index, ret;
+	u32 data;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << ALU_STAT_INDEX_S) |
+			ALU_STAT_READ | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		ret = lan937x_wait_alu_sta_ready(dev);
+		if (ret) {
+			dev_err(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		lan937x_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same fid & mac address */
+
+			if (((static_table[2] >> ALU_V_FID_S) == fid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->num_statics)
+		goto exit;
+
+	/* clear port based on port arg */
+	static_table[1] &= ~BIT(port);
+
+	if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+		/* delete entry */
+		static_table[0] = 0;
+		static_table[1] = 0;
+		static_table[2] = 0;
+		static_table[3] = 0;
+	}
+
+	lan937x_write_table(dev, static_table);
+
+	data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	ret = lan937x_wait_alu_sta_ready(dev);
+	if (ret)
+		dev_err(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
 static int lan937x_port_mirror_add(struct dsa_switch *ds, int port,
 				   struct dsa_mall_mirror_tc_entry *mirror,
 				   bool ingress)
@@ -433,6 +852,11 @@ const struct dsa_switch_ops lan937x_switch_ops = {
 	.port_bridge_leave	= ksz_port_bridge_leave,
 	.port_stp_state_set	= lan937x_port_stp_state_set,
 	.port_fast_age		= ksz_port_fast_age,
+	.port_fdb_dump		= lan937x_port_fdb_dump,
+	.port_fdb_add		= lan937x_port_fdb_add,
+	.port_fdb_del		= lan937x_port_fdb_del,
+	.port_mdb_add           = lan937x_port_mdb_add,
+	.port_mdb_del           = lan937x_port_mdb_del,
 	.port_mirror_add	= lan937x_port_mirror_add,
 	.port_mirror_del	= lan937x_port_mirror_del,
 	.port_max_mtu		= lan937x_get_max_mtu,
-- 
2.25.1


  parent reply	other threads:[~2021-01-28  6:46 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-28  6:41 [PATCH net-next 0/8] net: dsa: microchip: DSA driver support for LAN937x switch Prasanna Vengateshan
2021-01-28  6:41 ` [PATCH net-next 1/8] dt-bindings: net: dsa: dt bindings for microchip lan937x Prasanna Vengateshan
2021-01-30  2:02   ` Vladimir Oltean
2021-02-10 11:46     ` Prasanna Vengateshan Varadharajan
2021-02-10 18:57       ` Andrew Lunn
2021-02-09 19:35   ` Rob Herring
2021-01-28  6:41 ` [PATCH net-next 2/8] net: dsa: tag_ksz: add tag handling for Microchip LAN937x Prasanna Vengateshan
2021-01-28 18:03   ` Andrew Lunn
2021-01-30  2:27   ` Vladimir Oltean
2021-02-10 11:55     ` Prasanna Vengateshan Varadharajan
2021-01-28  6:41 ` [PATCH net-next 3/8] net: dsa: microchip: add DSA support for microchip lan937x Prasanna Vengateshan
2021-01-29  1:07   ` Andrew Lunn
2021-02-05 12:48     ` Prasanna Vengateshan Varadharajan
2021-02-05 13:27       ` Andrew Lunn
2021-03-15  6:25         ` Prasanna Vengateshan Varadharajan
2021-01-28  6:41 ` [PATCH net-next 4/8] net: dsa: microchip: add support for phylink management Prasanna Vengateshan
2021-01-29  1:12   ` Andrew Lunn
2021-01-28  6:41 ` [PATCH net-next 5/8] net: dsa: microchip: add support for ethtool port counters Prasanna Vengateshan
2021-01-28  6:41 ` [PATCH net-next 6/8] net: dsa: microchip: add support for port mirror operations Prasanna Vengateshan
2021-01-28  6:41 ` Prasanna Vengateshan [this message]
2021-01-28  6:41 ` [PATCH net-next 8/8] net: dsa: microchip: add support for vlan operations Prasanna Vengateshan
2021-01-28 17:55 ` [PATCH net-next 0/8] net: dsa: microchip: DSA driver support for LAN937x switch Florian Fainelli
2021-01-30  2:09   ` Vladimir Oltean
2021-02-02  1:25   ` Woojung.Huh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210128064112.372883-8-prasanna.vengateshan@microchip.com \
    --to=prasanna.vengateshan@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=Woojung.Huh@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®