From: Avri Altman <avri.altman@wdc.com>
To: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: gregkh@linuxfoundation.org, Bart Van Assche <bvanassche@acm.org>,
yongmyung lee <ymhungry.lee@samsung.com>,
Daejun Park <daejun7.park@samsung.com>,
alim.akhtar@samsung.com, asutoshd@codeaurora.org,
Zang Leigang <zangleigang@hisilicon.com>,
Avi Shchislowski <avi.shchislowski@wdc.com>,
Bean Huo <beanhuo@micron.com>,
cang@codeaurora.org, stanley.chu@mediatek.com,
Avri Altman <avri.altman@wdc.com>
Subject: [PATCH v2 4/9] scsi: ufshpb: Make eviction depends on region's reads
Date: Tue, 2 Feb 2021 10:30:02 +0200 [thread overview]
Message-ID: <20210202083007.104050-5-avri.altman@wdc.com> (raw)
In-Reply-To: <20210202083007.104050-1-avri.altman@wdc.com>
In host mode, eviction is considered an extreme measure.
verify that the entering region has enough reads, and the exiting
region has much less reads.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
---
drivers/scsi/ufs/ufshpb.c | 42 ++++++++++++++++++++++++++++++++++++---
1 file changed, 39 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index de4866d42df0..bae7dca105da 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -18,6 +18,7 @@
#define WORK_PENDING 0
#define ACTIVATION_THRSHLD 4 /* 4 IOs */
+#define EVICTION_THRSHLD (ACTIVATION_THRSHLD << 6) /* 256 IOs */
/* memory management */
static struct kmem_cache *ufshpb_mctx_cache;
@@ -644,6 +645,13 @@ static struct ufshpb_region *ufshpb_victim_lru_info(struct ufshpb_lu *hpb)
if (ufshpb_check_srgns_issue_state(hpb, rgn))
continue;
+ /*
+ * in host control mode, verify that the exiting region
+ * has less reads
+ */
+ if (hpb->is_hcm && rgn->reads > (EVICTION_THRSHLD >> 1))
+ continue;
+
victim_rgn = rgn;
break;
}
@@ -799,7 +807,7 @@ static int ufshpb_issue_map_req(struct ufshpb_lu *hpb,
static int ufshpb_add_region(struct ufshpb_lu *hpb, struct ufshpb_region *rgn)
{
- struct ufshpb_region *victim_rgn;
+ struct ufshpb_region *victim_rgn = NULL;
struct victim_select_info *lru_info = &hpb->lru_info;
unsigned long flags;
int ret = 0;
@@ -827,6 +835,16 @@ static int ufshpb_add_region(struct ufshpb_lu *hpb, struct ufshpb_region *rgn)
* because the device could detect this region
* by not issuing HPB_READ
*/
+
+ /*
+ * in host control mode, verify that the entering
+ * region has enough reads
+ */
+ if (hpb->is_hcm && rgn->reads < EVICTION_THRSHLD) {
+ ret = -EACCES;
+ goto out;
+ }
+
victim_rgn = ufshpb_victim_lru_info(hpb);
if (!victim_rgn) {
dev_warn(&hpb->sdev_ufs_lu->sdev_dev,
@@ -1034,8 +1052,13 @@ static void ufshpb_run_active_subregion_list(struct ufshpb_lu *hpb)
rgn = hpb->rgn_tbl + srgn->rgn_idx;
ret = ufshpb_add_region(hpb, rgn);
- if (ret)
- goto active_failed;
+ if (ret) {
+ if (ret == -EACCES) {
+ spin_lock_irqsave(&hpb->rsp_list_lock, flags);
+ continue;
+ }
+ goto add_region_failed;
+ }
ret = ufshpb_issue_map_req(hpb, rgn, srgn);
if (ret) {
@@ -1049,9 +1072,22 @@ static void ufshpb_run_active_subregion_list(struct ufshpb_lu *hpb)
spin_unlock_irqrestore(&hpb->rsp_list_lock, flags);
return;
+add_region_failed:
+ if (hpb->is_hcm) {
+ /*
+ * In host control mode, it is common that eviction trials
+ * fail, either because the entering region didn't have enough
+ * reads, or a poor-performing exiting region wasn't found.
+ * No need to re-insert those regions to the "to-be-activated"
+ * list.
+ */
+ return;
+ }
+
active_failed:
dev_err(&hpb->sdev_ufs_lu->sdev_dev, "failed to activate region %d - %d, will retry\n",
rgn->rgn_idx, srgn->srgn_idx);
+
spin_lock_irqsave(&hpb->rsp_list_lock, flags);
ufshpb_add_active_list(hpb, rgn, srgn);
spin_unlock_irqrestore(&hpb->rsp_list_lock, flags);
--
2.25.1
next prev parent reply other threads:[~2021-02-02 8:32 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 8:29 [PATCH v2 0/9] Add Host control mode to HPB Avri Altman
2021-02-02 8:29 ` [PATCH v2 1/9] scsi: ufshpb: Cache HPB Control mode on init Avri Altman
2021-02-02 8:30 ` [PATCH v2 2/9] scsi: ufshpb: Add host control mode support to rsp_upiu Avri Altman
2021-02-02 11:13 ` Greg KH
2021-02-02 11:24 ` Avri Altman
2021-02-02 11:51 ` Greg KH
2021-02-02 11:54 ` Avri Altman
2021-02-02 8:30 ` [PATCH v2 3/9] scsi: ufshpb: Add region's reads counter Avri Altman
2021-02-02 11:15 ` Greg KH
2021-02-02 11:23 ` Avri Altman
2021-02-02 11:51 ` Greg KH
2021-02-02 11:16 ` Greg KH
2021-02-02 11:22 ` Avri Altman
2021-02-02 8:30 ` Avri Altman [this message]
2021-02-02 8:30 ` [PATCH v2 5/9] scsi: ufshpb: Region inactivation in host mode Avri Altman
2021-02-02 8:30 ` [PATCH v2 6/9] scsi: ufshpb: Add hpb dev reset response Avri Altman
2021-02-08 6:34 ` Can Guo
2021-02-08 7:50 ` Avri Altman
2021-02-02 8:30 ` [PATCH v2 7/9] scsi: ufshpb: Add "Cold" regions timer Avri Altman
2021-02-02 8:30 ` [PATCH v2 8/9] scsi: ufshpb: Add support for host control mode Avri Altman
2021-02-02 8:30 ` [PATCH v2 9/9] scsi: ufshpb: Make host mode parameters configurable Avri Altman
2021-02-02 11:17 ` Greg KH
2021-02-02 11:21 ` Avri Altman
[not found] ` <CGME20210202112157epcas2p3b04677e1380e0fa2c3f38217dfcba8bf@epcms2p8>
2021-02-04 0:48 ` Daejun Park
2021-02-02 11:18 ` Greg KH
2021-02-02 11:20 ` Avri Altman
2021-02-05 11:36 ` [PATCH v2 0/9] Add Host control mode to HPB Bean Huo
2021-02-05 11:43 ` Bean Huo
2021-02-07 14:07 ` Avri Altman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202083007.104050-5-avri.altman@wdc.com \
--to=avri.altman@wdc.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avi.shchislowski@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=daejun7.park@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=ymhungry.lee@samsung.com \
--cc=zangleigang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®