* [PATCH -next v2] media: staging: atomisp: use list_move_tail instead of list_del/list_add_tail in atomisp_compat_css20.c
@ 2021-06-09 7:24 Baokun Li
2021-06-09 18:17 ` Andy Shevchenko
0 siblings, 1 reply; 3+ messages in thread
From: Baokun Li @ 2021-06-09 7:24 UTC (permalink / raw)
To: linux-kernel, Mauro Carvalho Chehab, Greg Kroah-Hartman,
Sakari Ailus, Andy Shevchenko, Kaixu Xia, Gustavo A. R. Silva
Cc: weiyongjun1, yuehaibing, yangjihong1, yukuai3, libaokun1,
linux-media, linux-staging, kernel-janitors, Hulk Robot
Using list_move_tail() instead of list_del() + list_add_tail() in atomisp_compat_css20.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
---
V1->V2:
CC mailist
.../pci/atomisp_compat_css20.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
index f60198bb8a1a..3bd4c616655d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
@@ -2147,22 +2147,19 @@ void atomisp_css_stop(struct atomisp_sub_device *asd,
while (!list_empty(&asd->s3a_stats_in_css)) {
s3a_buf = list_entry(asd->s3a_stats_in_css.next,
struct atomisp_s3a_buf, list);
- list_del(&s3a_buf->list);
- list_add_tail(&s3a_buf->list, &asd->s3a_stats);
+ list_move_tail(&s3a_buf->list, &asd->s3a_stats);
}
while (!list_empty(&asd->s3a_stats_ready)) {
s3a_buf = list_entry(asd->s3a_stats_ready.next,
struct atomisp_s3a_buf, list);
- list_del(&s3a_buf->list);
- list_add_tail(&s3a_buf->list, &asd->s3a_stats);
+ list_move_tail(&s3a_buf->list, &asd->s3a_stats);
}
spin_lock_irqsave(&asd->dis_stats_lock, irqflags);
while (!list_empty(&asd->dis_stats_in_css)) {
dis_buf = list_entry(asd->dis_stats_in_css.next,
struct atomisp_dis_buf, list);
- list_del(&dis_buf->list);
- list_add_tail(&dis_buf->list, &asd->dis_stats);
+ list_move_tail(&dis_buf->list, &asd->dis_stats);
}
asd->params.dis_proj_data_valid = false;
spin_unlock_irqrestore(&asd->dis_stats_lock, irqflags);
@@ -2171,14 +2168,12 @@ void atomisp_css_stop(struct atomisp_sub_device *asd,
while (!list_empty(&asd->metadata_in_css[i])) {
md_buf = list_entry(asd->metadata_in_css[i].next,
struct atomisp_metadata_buf, list);
- list_del(&md_buf->list);
- list_add_tail(&md_buf->list, &asd->metadata[i]);
+ list_move_tail(&md_buf->list, &asd->metadata[i]);
}
while (!list_empty(&asd->metadata_ready[i])) {
md_buf = list_entry(asd->metadata_ready[i].next,
struct atomisp_metadata_buf, list);
- list_del(&md_buf->list);
- list_add_tail(&md_buf->list, &asd->metadata[i]);
+ list_move_tail(&md_buf->list, &asd->metadata[i]);
}
}
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH -next v2] media: staging: atomisp: use list_move_tail instead of list_del/list_add_tail in atomisp_compat_css20.c
2021-06-09 7:24 [PATCH -next v2] media: staging: atomisp: use list_move_tail instead of list_del/list_add_tail in atomisp_compat_css20.c Baokun Li
@ 2021-06-09 18:17 ` Andy Shevchenko
2021-06-11 7:19 ` libaokun (A)
0 siblings, 1 reply; 3+ messages in thread
From: Andy Shevchenko @ 2021-06-09 18:17 UTC (permalink / raw)
To: Baokun Li
Cc: Linux Kernel Mailing List, Mauro Carvalho Chehab,
Greg Kroah-Hartman, Sakari Ailus, Andy Shevchenko, Kaixu Xia,
Gustavo A. R. Silva, Wei Yongjun, YueHaibing, yangjihong1,
yukuai3, Linux Media Mailing List, linux-staging,
kernel-janitors, Hulk Robot
On Wed, Jun 9, 2021 at 4:32 PM Baokun Li <libaokun1@huawei.com> wrote:
>
> Using list_move_tail() instead of list_del() + list_add_tail() in atomisp_compat_css20.c.
Have you considered using list_splice() instead of entire while-loops?
Or something similar from list.h...
> while (!list_empty(&asd->s3a_stats_in_css)) {
> s3a_buf = list_entry(asd->s3a_stats_in_css.next,
> struct atomisp_s3a_buf, list);
> - list_del(&s3a_buf->list);
> - list_add_tail(&s3a_buf->list, &asd->s3a_stats);
> + list_move_tail(&s3a_buf->list, &asd->s3a_stats);
> }
> while (!list_empty(&asd->s3a_stats_ready)) {
> s3a_buf = list_entry(asd->s3a_stats_ready.next,
> struct atomisp_s3a_buf, list);
> - list_del(&s3a_buf->list);
> - list_add_tail(&s3a_buf->list, &asd->s3a_stats);
> + list_move_tail(&s3a_buf->list, &asd->s3a_stats);
> }
> while (!list_empty(&asd->dis_stats_in_css)) {
> dis_buf = list_entry(asd->dis_stats_in_css.next,
> struct atomisp_dis_buf, list);
> - list_del(&dis_buf->list);
> - list_add_tail(&dis_buf->list, &asd->dis_stats);
> + list_move_tail(&dis_buf->list, &asd->dis_stats);
> }
> while (!list_empty(&asd->metadata_in_css[i])) {
> md_buf = list_entry(asd->metadata_in_css[i].next,
> struct atomisp_metadata_buf, list);
> - list_del(&md_buf->list);
> - list_add_tail(&md_buf->list, &asd->metadata[i]);
> + list_move_tail(&md_buf->list, &asd->metadata[i]);
> }
> while (!list_empty(&asd->metadata_ready[i])) {
> md_buf = list_entry(asd->metadata_ready[i].next,
> struct atomisp_metadata_buf, list);
> - list_del(&md_buf->list);
> - list_add_tail(&md_buf->list, &asd->metadata[i]);
> + list_move_tail(&md_buf->list, &asd->metadata[i]);
> }
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH -next v2] media: staging: atomisp: use list_move_tail instead of list_del/list_add_tail in atomisp_compat_css20.c
2021-06-09 18:17 ` Andy Shevchenko
@ 2021-06-11 7:19 ` libaokun (A)
0 siblings, 0 replies; 3+ messages in thread
From: libaokun (A) @ 2021-06-11 7:19 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Linux Kernel Mailing List, Mauro Carvalho Chehab,
Greg Kroah-Hartman, Sakari Ailus, Andy Shevchenko, Kaixu Xia,
Gustavo A. R. Silva, Wei Yongjun, YueHaibing, yangjihong1,
yukuai3, Linux Media Mailing List, linux-staging,
kernel-janitors, Hulk Robot
Thank you for your advice. That's a great idea.
I'm about to send a patch v3 with the changes suggested by you.
Best Regards
在 2021/6/10 2:17, Andy Shevchenko 写道:
> On Wed, Jun 9, 2021 at 4:32 PM Baokun Li <libaokun1@huawei.com> wrote:
>> Using list_move_tail() instead of list_del() + list_add_tail() in atomisp_compat_css20.c.
> Have you considered using list_splice() instead of entire while-loops?
> Or something similar from list.h...
>
>> while (!list_empty(&asd->s3a_stats_in_css)) {
>> s3a_buf = list_entry(asd->s3a_stats_in_css.next,
>> struct atomisp_s3a_buf, list);
>> - list_del(&s3a_buf->list);
>> - list_add_tail(&s3a_buf->list, &asd->s3a_stats);
>> + list_move_tail(&s3a_buf->list, &asd->s3a_stats);
>> }
>> while (!list_empty(&asd->s3a_stats_ready)) {
>> s3a_buf = list_entry(asd->s3a_stats_ready.next,
>> struct atomisp_s3a_buf, list);
>> - list_del(&s3a_buf->list);
>> - list_add_tail(&s3a_buf->list, &asd->s3a_stats);
>> + list_move_tail(&s3a_buf->list, &asd->s3a_stats);
>> }
>> while (!list_empty(&asd->dis_stats_in_css)) {
>> dis_buf = list_entry(asd->dis_stats_in_css.next,
>> struct atomisp_dis_buf, list);
>> - list_del(&dis_buf->list);
>> - list_add_tail(&dis_buf->list, &asd->dis_stats);
>> + list_move_tail(&dis_buf->list, &asd->dis_stats);
>> }
>> while (!list_empty(&asd->metadata_in_css[i])) {
>> md_buf = list_entry(asd->metadata_in_css[i].next,
>> struct atomisp_metadata_buf, list);
>> - list_del(&md_buf->list);
>> - list_add_tail(&md_buf->list, &asd->metadata[i]);
>> + list_move_tail(&md_buf->list, &asd->metadata[i]);
>> }
>> while (!list_empty(&asd->metadata_ready[i])) {
>> md_buf = list_entry(asd->metadata_ready[i].next,
>> struct atomisp_metadata_buf, list);
>> - list_del(&md_buf->list);
>> - list_add_tail(&md_buf->list, &asd->metadata[i]);
>> + list_move_tail(&md_buf->list, &asd->metadata[i]);
>> }
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-06-11 7:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-09 7:24 [PATCH -next v2] media: staging: atomisp: use list_move_tail instead of list_del/list_add_tail in atomisp_compat_css20.c Baokun Li
2021-06-09 18:17 ` Andy Shevchenko
2021-06-11 7:19 ` libaokun (A)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®