[PATCH next 12/15] ARM: dts: am335x-phycore: switch to new cpsw switch drv

[Grygorii Strashko <grygorii.strashko@ti.com>]

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch Phytec AM335x phyCORE SOM, phyBOARD-WEGA, phyBOARD-REGOR,
PCM-953 to use new cpsw switch driver. Those boards have or 2 Ext. port
wired and configured in dual_mac mode by default, or only 1 Ext. port.

Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am335x-pcm-953.dtsi     | 10 ++++------
 arch/arm/boot/dts/am335x-phycore-som.dtsi | 14 ++++++++------
 arch/arm/boot/dts/am335x-regor.dtsi       | 11 +++++------
 arch/arm/boot/dts/am335x-wega.dtsi        | 11 +++++------
 4 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 6c547c83e5dd..124026fa0d09 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -123,24 +123,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@2 {
 		reg = <2>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac;
 };
 
 /* Misc */
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 7e46b4c02709..f65cd1331315 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -97,24 +97,26 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&davinci_mdio {
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
 
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 6fbf4ac739e7..7b3966ee51b9 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -85,23 +85,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
 };
 
 /* GPIOs */
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 1359bf8715e6..673159d93a6a 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -111,23 +111,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
 };
 
 /* MMC */
-- 
2.17.1