[PATCH next 07/15] ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv

[Grygorii Strashko <grygorii.strashko@ti.com>]

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch Moxa am335x-moxa-uc-210x/8100 to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.

Cc: Johnson Chen <johnsonch.chen@moxa.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 .../arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 12 ++++++------
 arch/arm/boot/dts/am335x-moxa-uc-2101.dts        |  7 +++----
 .../arm/boot/dts/am335x-moxa-uc-8100-common.dtsi | 16 ++++++----------
 3 files changed, 15 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 8121a199607c..11e8f64b6606 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -122,24 +122,24 @@
 	regulator-max-microvolt = <5000000>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
+	ti,dual-emac-pvid = <2>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
index 5923b6e7e1cb..1cc513ed92cc 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -52,18 +52,17 @@
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@4 {
 		reg = <4>;
 	};
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 39e5d2ce600a..a7269b90d795 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -310,17 +310,15 @@
 	regulator-max-microvolt = <5000000>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;
@@ -331,18 +329,16 @@
 	};
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &sham {
-- 
2.17.1