[PATCH 1/2] power: reset: linkstation-poweroff: prepare for new devices

[PATCH 1/2] power: reset: linkstation-poweroff: prepare for new devices

[Pawel Dembicki]

This commit prepare driver for another device support.

New power_off_cfg structure describes two most important things: name of
mdio bus and pointer to register setting function. It allow to add new
device with different mdio bus node and other phy register config.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
 drivers/power/reset/linkstation-poweroff.c | 35 ++++++++++++++++++----
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
index f1e843df0e16..cb5a32f852c1 100644
--- a/drivers/power/reset/linkstation-poweroff.c
+++ b/drivers/power/reset/linkstation-poweroff.c
@@ -29,11 +29,21 @@
 #define LED2_FORCE_ON					(0x8 << 8)
 #define LEDMASK						GENMASK(11,8)
 
+struct power_off_cfg {
+	char *mdio_node_name;
+	void (*phy_set_reg)(bool restart);
+};
+
 static struct phy_device *phydev;
+static const struct power_off_cfg *cfg;
 
-static void mvphy_reg_intn(u16 data)
+static void linkstation_mvphy_reg_intn(bool restart)
 {
 	int rc = 0, saved_page;
+	u16 data = 0;
+
+	if (restart)
+		data = MII_88E1318S_PHY_LED_TCR_FORCE_INT;
 
 	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
 	if (saved_page < 0)
@@ -66,11 +76,16 @@ static void mvphy_reg_intn(u16 data)
 		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
 }
 
+static const struct power_off_cfg linkstation_power_off_cfg = {
+	.mdio_node_name = "mdio",
+	.phy_set_reg = linkstation_mvphy_reg_intn,
+};
+
 static int linkstation_reboot_notifier(struct notifier_block *nb,
 				       unsigned long action, void *unused)
 {
 	if (action == SYS_RESTART)
-		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
+		cfg->phy_set_reg(true);
 
 	return NOTIFY_DONE;
 }
@@ -82,14 +97,18 @@ static struct notifier_block linkstation_reboot_nb = {
 static void linkstation_poweroff(void)
 {
 	unregister_reboot_notifier(&linkstation_reboot_nb);
-	mvphy_reg_intn(0);
+	cfg->phy_set_reg(false);
 
 	kernel_restart("Power off");
 }
 
 static const struct of_device_id ls_poweroff_of_match[] = {
-	{ .compatible = "buffalo,ls421d" },
-	{ .compatible = "buffalo,ls421de" },
+	{ .compatible = "buffalo,ls421d",
+	  .data = &linkstation_power_off_cfg,
+	},
+	{ .compatible = "buffalo,ls421de",
+	  .data = &linkstation_power_off_cfg,
+	},
 	{ },
 };
 
@@ -97,13 +116,17 @@ static int __init linkstation_poweroff_init(void)
 {
 	struct mii_bus *bus;
 	struct device_node *dn;
+	const struct of_device_id *match;
 
 	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
 	if (!dn)
 		return -ENODEV;
 	of_node_put(dn);
 
-	dn = of_find_node_by_name(NULL, "mdio");
+	match = of_match_node(ls_poweroff_of_match, dn);
+	cfg = match->data;
+
+	dn = of_find_node_by_name(NULL, cfg->mdio_node_name);
 	if (!dn)
 		return -ENODEV;
 
-- 
2.25.1

[PATCH 2/2] power: reset: linkstation-poweroff: add new device

[Pawel Dembicki]

This commit introduces support for NETGEAR ReadyNAS Duo v2.
This device use bit 4 of LED[2:0] Polarity Control Register to indicate
AC Power loss.

For more details about AC loss detection in NETGEAR ReadyNAS Duo v2,
please look at the file:
RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c
from Netgear GPL sources.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
 drivers/power/reset/linkstation-poweroff.c | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
index cb5a32f852c1..5afe3ef23395 100644
--- a/drivers/power/reset/linkstation-poweroff.c
+++ b/drivers/power/reset/linkstation-poweroff.c
@@ -19,6 +19,7 @@
 #define MII_MARVELL_PHY_PAGE		22
 
 #define MII_PHY_LED_CTRL		16
+#define MII_PHY_LED_POL_CTRL		17
 #define MII_88E1318S_PHY_LED_TCR	18
 #define MII_88E1318S_PHY_WOL_CTRL	16
 #define MII_M1011_IEVENT		19
@@ -29,6 +30,8 @@
 #define LED2_FORCE_ON					(0x8 << 8)
 #define LEDMASK						GENMASK(11,8)
 
+#define MII_88E1318S_PHY_LED_POL_LED2		BIT(4)
+
 struct power_off_cfg {
 	char *mdio_node_name;
 	void (*phy_set_reg)(bool restart);
@@ -76,11 +79,48 @@ static void linkstation_mvphy_reg_intn(bool restart)
 		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
 }
 
+static void readynas_mvphy_set_reg(bool restart)
+{
+	int rc = 0, saved_page;
+	u16 data = 0;
+
+	if (restart)
+		data = MII_88E1318S_PHY_LED_POL_LED2;
+
+	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
+	if (saved_page < 0)
+		goto err;
+
+	/* Set the LED[2].0 Polarity bit to the required state */
+	__phy_modify(phydev, MII_PHY_LED_POL_CTRL,
+		     MII_88E1318S_PHY_LED_POL_LED2, data);
+
+	if (!data) {
+
+		/* If WOL was enabled and a magic packet was received before powering
+		 * off, we won't be able to wake up by sending another magic packet.
+		 * Clear WOL status.
+		 */
+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
+		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+	}
+err:
+	rc = phy_restore_page(phydev, saved_page, rc);
+	if (rc < 0)
+		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
+}
+
 static const struct power_off_cfg linkstation_power_off_cfg = {
 	.mdio_node_name = "mdio",
 	.phy_set_reg = linkstation_mvphy_reg_intn,
 };
 
+static const struct power_off_cfg readynas_power_off_cfg = {
+	.mdio_node_name = "mdio-bus",
+	.phy_set_reg = readynas_mvphy_set_reg,
+};
+
 static int linkstation_reboot_notifier(struct notifier_block *nb,
 				       unsigned long action, void *unused)
 {
@@ -109,6 +149,9 @@ static const struct of_device_id ls_poweroff_of_match[] = {
 	{ .compatible = "buffalo,ls421de",
 	  .data = &linkstation_power_off_cfg,
 	},
+	{ .compatible = "netgear,readynas-duo-v2",
+	  .data = &readynas_power_off_cfg,
+	},
 	{ },
 };
 
-- 
2.25.1

Re: [PATCH 2/2] power: reset: linkstation-poweroff: add new device

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 3340 bytes --]

Hi,

On Thu, Jun 24, 2021 at 11:18:12AM +0200, Pawel Dembicki wrote:
> This commit introduces support for NETGEAR ReadyNAS Duo v2.
> This device use bit 4 of LED[2:0] Polarity Control Register to indicate
> AC Power loss.
> 
> For more details about AC loss detection in NETGEAR ReadyNAS Duo v2,
> please look at the file:
> RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c
> from Netgear GPL sources.
> 
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
> ---

Thanks, queued.

-- Sebastian

>  drivers/power/reset/linkstation-poweroff.c | 43 ++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
> index cb5a32f852c1..5afe3ef23395 100644
> --- a/drivers/power/reset/linkstation-poweroff.c
> +++ b/drivers/power/reset/linkstation-poweroff.c
> @@ -19,6 +19,7 @@
>  #define MII_MARVELL_PHY_PAGE		22
>  
>  #define MII_PHY_LED_CTRL		16
> +#define MII_PHY_LED_POL_CTRL		17
>  #define MII_88E1318S_PHY_LED_TCR	18
>  #define MII_88E1318S_PHY_WOL_CTRL	16
>  #define MII_M1011_IEVENT		19
> @@ -29,6 +30,8 @@
>  #define LED2_FORCE_ON					(0x8 << 8)
>  #define LEDMASK						GENMASK(11,8)
>  
> +#define MII_88E1318S_PHY_LED_POL_LED2		BIT(4)
> +
>  struct power_off_cfg {
>  	char *mdio_node_name;
>  	void (*phy_set_reg)(bool restart);
> @@ -76,11 +79,48 @@ static void linkstation_mvphy_reg_intn(bool restart)
>  		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
>  }
>  
> +static void readynas_mvphy_set_reg(bool restart)
> +{
> +	int rc = 0, saved_page;
> +	u16 data = 0;
> +
> +	if (restart)
> +		data = MII_88E1318S_PHY_LED_POL_LED2;
> +
> +	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
> +	if (saved_page < 0)
> +		goto err;
> +
> +	/* Set the LED[2].0 Polarity bit to the required state */
> +	__phy_modify(phydev, MII_PHY_LED_POL_CTRL,
> +		     MII_88E1318S_PHY_LED_POL_LED2, data);
> +
> +	if (!data) {
> +
> +		/* If WOL was enabled and a magic packet was received before powering
> +		 * off, we won't be able to wake up by sending another magic packet.
> +		 * Clear WOL status.
> +		 */
> +		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
> +		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
> +			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
> +	}
> +err:
> +	rc = phy_restore_page(phydev, saved_page, rc);
> +	if (rc < 0)
> +		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
> +}
> +
>  static const struct power_off_cfg linkstation_power_off_cfg = {
>  	.mdio_node_name = "mdio",
>  	.phy_set_reg = linkstation_mvphy_reg_intn,
>  };
>  
> +static const struct power_off_cfg readynas_power_off_cfg = {
> +	.mdio_node_name = "mdio-bus",
> +	.phy_set_reg = readynas_mvphy_set_reg,
> +};
> +
>  static int linkstation_reboot_notifier(struct notifier_block *nb,
>  				       unsigned long action, void *unused)
>  {
> @@ -109,6 +149,9 @@ static const struct of_device_id ls_poweroff_of_match[] = {
>  	{ .compatible = "buffalo,ls421de",
>  	  .data = &linkstation_power_off_cfg,
>  	},
> +	{ .compatible = "netgear,readynas-duo-v2",
> +	  .data = &readynas_power_off_cfg,
> +	},
>  	{ },
>  };
>  
> -- 
> 2.25.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] power: reset: linkstation-poweroff: prepare for new devices

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 3237 bytes --]

Hi,

On Thu, Jun 24, 2021 at 11:18:11AM +0200, Pawel Dembicki wrote:
> This commit prepare driver for another device support.
> 
> New power_off_cfg structure describes two most important things: name of
> mdio bus and pointer to register setting function. It allow to add new
> device with different mdio bus node and other phy register config.
> 
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
> ---

Thanks, queued.

-- Sebastian

>  drivers/power/reset/linkstation-poweroff.c | 35 ++++++++++++++++++----
>  1 file changed, 29 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
> index f1e843df0e16..cb5a32f852c1 100644
> --- a/drivers/power/reset/linkstation-poweroff.c
> +++ b/drivers/power/reset/linkstation-poweroff.c
> @@ -29,11 +29,21 @@
>  #define LED2_FORCE_ON					(0x8 << 8)
>  #define LEDMASK						GENMASK(11,8)
>  
> +struct power_off_cfg {
> +	char *mdio_node_name;
> +	void (*phy_set_reg)(bool restart);
> +};
> +
>  static struct phy_device *phydev;
> +static const struct power_off_cfg *cfg;
>  
> -static void mvphy_reg_intn(u16 data)
> +static void linkstation_mvphy_reg_intn(bool restart)
>  {
>  	int rc = 0, saved_page;
> +	u16 data = 0;
> +
> +	if (restart)
> +		data = MII_88E1318S_PHY_LED_TCR_FORCE_INT;
>  
>  	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
>  	if (saved_page < 0)
> @@ -66,11 +76,16 @@ static void mvphy_reg_intn(u16 data)
>  		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
>  }
>  
> +static const struct power_off_cfg linkstation_power_off_cfg = {
> +	.mdio_node_name = "mdio",
> +	.phy_set_reg = linkstation_mvphy_reg_intn,
> +};
> +
>  static int linkstation_reboot_notifier(struct notifier_block *nb,
>  				       unsigned long action, void *unused)
>  {
>  	if (action == SYS_RESTART)
> -		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
> +		cfg->phy_set_reg(true);
>  
>  	return NOTIFY_DONE;
>  }
> @@ -82,14 +97,18 @@ static struct notifier_block linkstation_reboot_nb = {
>  static void linkstation_poweroff(void)
>  {
>  	unregister_reboot_notifier(&linkstation_reboot_nb);
> -	mvphy_reg_intn(0);
> +	cfg->phy_set_reg(false);
>  
>  	kernel_restart("Power off");
>  }
>  
>  static const struct of_device_id ls_poweroff_of_match[] = {
> -	{ .compatible = "buffalo,ls421d" },
> -	{ .compatible = "buffalo,ls421de" },
> +	{ .compatible = "buffalo,ls421d",
> +	  .data = &linkstation_power_off_cfg,
> +	},
> +	{ .compatible = "buffalo,ls421de",
> +	  .data = &linkstation_power_off_cfg,
> +	},
>  	{ },
>  };
>  
> @@ -97,13 +116,17 @@ static int __init linkstation_poweroff_init(void)
>  {
>  	struct mii_bus *bus;
>  	struct device_node *dn;
> +	const struct of_device_id *match;
>  
>  	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
>  	if (!dn)
>  		return -ENODEV;
>  	of_node_put(dn);
>  
> -	dn = of_find_node_by_name(NULL, "mdio");
> +	match = of_match_node(ls_poweroff_of_match, dn);
> +	cfg = match->data;
> +
> +	dn = of_find_node_by_name(NULL, cfg->mdio_node_name);
>  	if (!dn)
>  		return -ENODEV;
>  
> -- 
> 2.25.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]