[PATCH] drm: vc4: Fix pixel-wrap issue with DVP teardown

[PATCH] drm: vc4: Fix pixel-wrap issue with DVP teardown

[Maxime Ripard]

From: Tim Gover <tim.gover@raspberrypi.com>

Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
in an internal, non resettable FIFO within PixelValve when changing
HDMI resolution.

The blank pixels features of the DVP can prevent signals back to
pixelvalve causing it to not clear the FIFO. Adjust the ordering
and timing of operations to ensure the clear signal makes it through to
pixelvalve.

Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4ebe216b10a9..472a9d6b5866 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -605,12 +605,12 @@ static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder,
 
 	HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
 
-	HDMI_WRITE(HDMI_VID_CTL, HDMI_READ(HDMI_VID_CTL) |
-		   VC4_HD_VID_CTL_CLRRGB | VC4_HD_VID_CTL_CLRSYNC);
+	HDMI_WRITE(HDMI_VID_CTL, HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_CLRRGB);
+
+	mdelay(1);
 
 	HDMI_WRITE(HDMI_VID_CTL,
-		   HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX);
-
+		   HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
 	vc4_hdmi_disable_scrambling(encoder);
 }
 
@@ -620,12 +620,12 @@ static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	int ret;
 
+	HDMI_WRITE(HDMI_VID_CTL,
+		   HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX);
+
 	if (vc4_hdmi->variant->phy_disable)
 		vc4_hdmi->variant->phy_disable(vc4_hdmi);
 
-	HDMI_WRITE(HDMI_VID_CTL,
-		   HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
-
 	clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
 	clk_disable_unprepare(vc4_hdmi->hsm_clock);
 	clk_disable_unprepare(vc4_hdmi->pixel_clock);
@@ -1017,6 +1017,7 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
 
 	HDMI_WRITE(HDMI_VID_CTL,
 		   VC4_HD_VID_CTL_ENABLE |
+		   VC4_HD_VID_CTL_CLRRGB |
 		   VC4_HD_VID_CTL_UNDERFLOW_ENABLE |
 		   VC4_HD_VID_CTL_FRAME_COUNTER_RESET |
 		   (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
-- 
2.31.1

Re: [PATCH] drm: vc4: Fix pixel-wrap issue with DVP teardown

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 642 bytes --]

On Mon, Jun 28, 2021 at 03:05:33PM +0200, Maxime Ripard wrote:
> From: Tim Gover <tim.gover@raspberrypi.com>
> 
> Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
> in an internal, non resettable FIFO within PixelValve when changing
> HDMI resolution.
> 
> The blank pixels features of the DVP can prevent signals back to
> pixelvalve causing it to not clear the FIFO. Adjust the ordering
> and timing of operations to ensure the clear signal makes it through to
> pixelvalve.
> 
> Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Applied

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]