* [PATCH] arch: arm64: dts: Set gpio5-pin9 as input by default
@ 2021-10-19 9:00 Meng Li
2021-10-19 14:42 ` Kieran Bingham
0 siblings, 1 reply; 2+ messages in thread
From: Meng Li @ 2021-10-19 9:00 UTC (permalink / raw)
To: geert+renesas, magnus.damm, robh+dt
Cc: linux-renesas-soc, devicetree, linux-kernel, meng.li
The gpio5-pin9 is used as the interrupt pin of i2c external
gpio chip, so set this pin as input by default.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 202177706cde..8986a7e6e099 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -205,6 +205,15 @@
};
};
+&gpio5 {
+ gpio_exp_77_int {
+ gpio-hog;
+ gpios = <9 0>;
+ input;
+ line-name = "gpio-exp-77-int";
+ };
+};
+
&i2c4 {
i2cswitch4: i2c-switch@71 {
compatible = "nxp,pca9548";
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] arch: arm64: dts: Set gpio5-pin9 as input by default
2021-10-19 9:00 [PATCH] arch: arm64: dts: Set gpio5-pin9 as input by default Meng Li
@ 2021-10-19 14:42 ` Kieran Bingham
0 siblings, 0 replies; 2+ messages in thread
From: Kieran Bingham @ 2021-10-19 14:42 UTC (permalink / raw)
To: Meng Li, geert+renesas, magnus.damm, robh+dt
Cc: linux-renesas-soc, devicetree, linux-kernel, meng.li
Quoting Meng Li (2021-10-19 10:00:20)
> The gpio5-pin9 is used as the interrupt pin of i2c external
> gpio chip, so set this pin as input by default.
Is a GPIO hog the right way to do this?
Shouldn't the other GPIO chip be modelled in DT and reference the gpio
interrupt line from there in its interrupt property?
I assume by 'external gpio chip' you mean one which is permanantly
attached to the ULCB Kingfisher board, and not a custom addition?
--
Regards
Kieran
>
> Signed-off-by: Meng Li <Meng.Li@windriver.com>
> ---
> arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> index 202177706cde..8986a7e6e099 100644
> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -205,6 +205,15 @@
> };
> };
>
> +&gpio5 {
> + gpio_exp_77_int {
> + gpio-hog;
> + gpios = <9 0>;
> + input;
> + line-name = "gpio-exp-77-int";
> + };
> +};
> +
> &i2c4 {
> i2cswitch4: i2c-switch@71 {
> compatible = "nxp,pca9548";
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-19 14:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-19 9:00 [PATCH] arch: arm64: dts: Set gpio5-pin9 as input by default Meng Li
2021-10-19 14:42 ` Kieran Bingham
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®