* [PATCH] ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
@ 2021-10-20 21:47 David Heidelberg
0 siblings, 0 replies; only message in thread
From: David Heidelberg @ 2021-10-20 21:47 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~okias/devicetree, David Heidelberg, linux-arm-msm, devicetree,
linux-kernel
Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 0244dda06ee8..596d129d4a95 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@ chosen {
stdout-path = "serial0:115200n8";
};
- memory@0 {
+ memory@42000000 {
reg = <0x42000000 0x3e000000>;
device_type = "memory";
};
- mdio0: mdio@0 {
+ mdio0: mdio-0 {
status = "okay";
compatible = "virtual,mdio-gpio";
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@ port@5 {
};
};
- mdio1: mdio@1 {
+ mdio1: mdio-1 {
status = "okay";
compatible = "virtual,mdio-gpio";
gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
--
2.33.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-10-20 21:47 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-20 21:47 [PATCH] ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 David Heidelberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®