[PATCH] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[PATCH] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[Ulf Hansson]

The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.

In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.

To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/sdio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 68edf7a615be..5447c47157aa 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -708,6 +708,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	if (host->ops->init_card)
 		host->ops->init_card(host, card);
 
+	card->ocr = ocr_card;
+
 	/*
 	 * If the host and card support UHS-I mode request the card
 	 * to switch to 1.8V signaling level.  No 1.8v signalling if
@@ -820,7 +822,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 			goto mismatch;
 		}
 	}
-	card->ocr = ocr_card;
+
 	mmc_fixup_device(card, sdio_fixup_methods);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {
-- 
2.25.1