* [PATCH] arm64: dts: allwinner: h6: tanix-tx6: Add I2C node
@ 2021-11-21 11:50 Jernej Skrabec
2021-11-22 9:07 ` Maxime Ripard
0 siblings, 1 reply; 2+ messages in thread
From: Jernej Skrabec @ 2021-11-21 11:50 UTC (permalink / raw)
To: mripard, wens
Cc: robh+dt, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
Jernej Skrabec
Tanix TX6 has a LED display driven by FD650.
Currently there is no Linux driver nor any binding for it. However, we
can at least provide I2C node in DT, so user space scripts or programs
can manually control it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 6c10ff7f4b1c..7c37aa4c60cb 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -32,6 +32,14 @@ hdmi_con_in: endpoint {
};
};
+ /* used for FD650 LED display driver */
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+ scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+ i2c-gpio,delay-us = <5>;
+ };
+
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
--
2.34.0
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] arm64: dts: allwinner: h6: tanix-tx6: Add I2C node
2021-11-21 11:50 [PATCH] arm64: dts: allwinner: h6: tanix-tx6: Add I2C node Jernej Skrabec
@ 2021-11-22 9:07 ` Maxime Ripard
0 siblings, 0 replies; 2+ messages in thread
From: Maxime Ripard @ 2021-11-22 9:07 UTC (permalink / raw)
To: mripard, wens, Jernej Skrabec
Cc: Maxime Ripard, linux-kernel, linux-arm-kernel, robh+dt,
devicetree, linux-sunxi
On Sun, 21 Nov 2021 12:50:02 +0100, Jernej Skrabec wrote:
> Tanix TX6 has a LED display driven by FD650.
>
> Currently there is no Linux driver nor any binding for it. However, we
> can at least provide I2C node in DT, so user space scripts or programs
> can manually control it.
>
>
> [...]
Applied to sunxi/linux.git (sunxi/dt-for-5.17).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-11-22 9:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-21 11:50 [PATCH] arm64: dts: allwinner: h6: tanix-tx6: Add I2C node Jernej Skrabec
2021-11-22 9:07 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®