From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: "Rafael J . Wysocki" <rafael@kernel.org>,
Len Brown <lenb@kernel.org>, Hans de Goede <hdegoede@redhat.com>,
Mark Gross <markgross@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Mark Brown <broonie@kernel.org>,
Takashi Iwai <tiwai@suse.com>, Kailang Yang <kailang@realtek.com>,
Shuming Fan <shumingf@realtek.com>,
"Pierre-Louis Bossart" <pierre-louis.bossart@linux.intel.com>,
David Rhodes <david.rhodes@cirrus.com>,
Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: Jeremy Szu <jeremy.szu@canonical.com>,
Hui Wang <hui.wang@canonical.com>,
Werner Sembach <wse@tuxedocomputers.com>,
Chris Chiu <chris.chiu@canonical.com>,
Cameron Berkenpas <cam@neo-zeon.de>, Sami Loone <sami@loone.fi>,
Elia Devito <eliadevito@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Jack Yu <jack.yu@realtek.com>, "Arnd Bergmann" <arnd@arndb.de>,
Lars-Peter Clausen <lars@metafoo.de>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
<alsa-devel@alsa-project.org>, <linux-acpi@vger.kernel.org>,
<patches@opensource.cirrus.com>,
<platform-driver-x86@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
"Lucas Tanure" <tanureal@opensource.cirrus.com>
Subject: [PATCH 09/11] ASoC: cs35l41: Create shared function for boost configuration
Date: Tue, 23 Nov 2021 16:31:47 +0000 [thread overview]
Message-ID: <20211123163149.1530535-10-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20211123163149.1530535-1-tanureal@opensource.cirrus.com>
ASoC and HDA will use the same registers to configure
internal boost for the device
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
include/sound/cs35l41.h | 2 +
sound/soc/codecs/cs35l41-lib.c | 97 ++++++++++++++++++++++++++++++
sound/soc/codecs/cs35l41.c | 105 +--------------------------------
3 files changed, 101 insertions(+), 103 deletions(-)
diff --git a/include/sound/cs35l41.h b/include/sound/cs35l41.h
index 219f23f643a6..c80ede66f297 100644
--- a/include/sound/cs35l41.h
+++ b/include/sound/cs35l41.h
@@ -769,5 +769,7 @@ int cs35l41_register_errata_patch(struct device *dev, struct regmap *reg, unsign
int cs35l41_set_channels(struct device *dev, struct regmap *reg,
unsigned int tx_num, unsigned int *tx_slot,
unsigned int rx_num, unsigned int *rx_slot);
+int cs35l41_boost_config(struct device *dev, struct regmap *regmap, int boost_ind, int boost_cap,
+ int boost_ipk);
#endif /* __CS35L41_H */
diff --git a/sound/soc/codecs/cs35l41-lib.c b/sound/soc/codecs/cs35l41-lib.c
index 5bb733bb02a0..b582e8214c86 100644
--- a/sound/soc/codecs/cs35l41-lib.c
+++ b/sound/soc/codecs/cs35l41-lib.c
@@ -983,3 +983,100 @@ int cs35l41_set_channels(struct device *dev, struct regmap *reg,
return 0;
}
+static const unsigned char cs35l41_bst_k1_table[4][5] = {
+ { 0x24, 0x32, 0x32, 0x4F, 0x57 },
+ { 0x24, 0x32, 0x32, 0x4F, 0x57 },
+ { 0x40, 0x32, 0x32, 0x4F, 0x57 },
+ { 0x40, 0x32, 0x32, 0x4F, 0x57 }
+};
+
+static const unsigned char cs35l41_bst_k2_table[4][5] = {
+ { 0x24, 0x49, 0x66, 0xA3, 0xEA },
+ { 0x24, 0x49, 0x66, 0xA3, 0xEA },
+ { 0x48, 0x49, 0x66, 0xA3, 0xEA },
+ { 0x48, 0x49, 0x66, 0xA3, 0xEA }
+};
+
+static const unsigned char cs35l41_bst_slope_table[4] = {
+ 0x75, 0x6B, 0x3B, 0x28
+};
+
+
+int cs35l41_boost_config(struct device *dev, struct regmap *regmap, int boost_ind, int boost_cap,
+ int boost_ipk)
+{
+ unsigned char bst_lbst_val, bst_cbst_range, bst_ipk_scaled;
+ int ret;
+
+ switch (boost_ind) {
+ case 1000: /* 1.0 uH */
+ bst_lbst_val = 0;
+ break;
+ case 1200: /* 1.2 uH */
+ bst_lbst_val = 1;
+ break;
+ case 1500: /* 1.5 uH */
+ bst_lbst_val = 2;
+ break;
+ case 2200: /* 2.2 uH */
+ bst_lbst_val = 3;
+ break;
+ default:
+ dev_err(dev, "Invalid boost inductor value: %d nH\n", boost_ind);
+ return -EINVAL;
+ }
+
+ switch (boost_cap) {
+ case 0 ... 19:
+ bst_cbst_range = 0;
+ break;
+ case 20 ... 50:
+ bst_cbst_range = 1;
+ break;
+ case 51 ... 100:
+ bst_cbst_range = 2;
+ break;
+ case 101 ... 200:
+ bst_cbst_range = 3;
+ break;
+ default: /* 201 uF and greater */
+ bst_cbst_range = 4;
+ }
+
+ ret = regmap_update_bits(regmap, CS35L41_BSTCVRT_COEFF,
+ CS35L41_BST_K1_MASK | CS35L41_BST_K2_MASK,
+ cs35l41_bst_k1_table[bst_lbst_val][bst_cbst_range]
+ << CS35L41_BST_K1_SHIFT |
+ cs35l41_bst_k2_table[bst_lbst_val][bst_cbst_range]
+ << CS35L41_BST_K2_SHIFT);
+ if (ret) {
+ dev_err(dev, "Failed to write boost coefficients: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_update_bits(regmap, CS35L41_BSTCVRT_SLOPE_LBST,
+ CS35L41_BST_SLOPE_MASK | CS35L41_BST_LBST_VAL_MASK,
+ cs35l41_bst_slope_table[bst_lbst_val]
+ << CS35L41_BST_SLOPE_SHIFT |
+ bst_lbst_val << CS35L41_BST_LBST_VAL_SHIFT);
+ if (ret) {
+ dev_err(dev, "Failed to write boost slope/inductor value: %d\n", ret);
+ return ret;
+ }
+
+ if (boost_ipk < 1600 || boost_ipk > 4500) {
+ dev_err(dev, "Invalid boost inductor peak current: %d mA\n", boost_ipk);
+ return -EINVAL;
+ }
+ bst_ipk_scaled = ((boost_ipk - 1600) / 50) + 0x10;
+
+ ret = regmap_update_bits(regmap, CS35L41_BSTCVRT_PEAK_CUR, CS35L41_BST_IPK_MASK,
+ bst_ipk_scaled << CS35L41_BST_IPK_SHIFT);
+ if (ret) {
+ dev_err(dev, "Failed to write boost inductor peak current: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
diff --git a/sound/soc/codecs/cs35l41.c b/sound/soc/codecs/cs35l41.c
index e61736daef62..99a70e9bb8e8 100644
--- a/sound/soc/codecs/cs35l41.c
+++ b/sound/soc/codecs/cs35l41.c
@@ -145,24 +145,6 @@ static const struct cs35l41_fs_mon_config cs35l41_fs_mon[] = {
{ 6144000, 16, 24 },
};
-static const unsigned char cs35l41_bst_k1_table[4][5] = {
- { 0x24, 0x32, 0x32, 0x4F, 0x57 },
- { 0x24, 0x32, 0x32, 0x4F, 0x57 },
- { 0x40, 0x32, 0x32, 0x4F, 0x57 },
- { 0x40, 0x32, 0x32, 0x4F, 0x57 }
-};
-
-static const unsigned char cs35l41_bst_k2_table[4][5] = {
- { 0x24, 0x49, 0x66, 0xA3, 0xEA },
- { 0x24, 0x49, 0x66, 0xA3, 0xEA },
- { 0x48, 0x49, 0x66, 0xA3, 0xEA },
- { 0x48, 0x49, 0x66, 0xA3, 0xEA }
-};
-
-static const unsigned char cs35l41_bst_slope_table[4] = {
- 0x75, 0x6B, 0x3B, 0x28
-};
-
static int cs35l41_get_fs_mon_config_index(int freq)
{
int i;
@@ -987,88 +969,6 @@ static int cs35l41_dai_set_sysclk(struct snd_soc_dai *dai,
return 0;
}
-static int cs35l41_boost_config(struct cs35l41_private *cs35l41,
- int boost_ind, int boost_cap, int boost_ipk)
-{
- unsigned char bst_lbst_val, bst_cbst_range, bst_ipk_scaled;
- struct regmap *regmap = cs35l41->regmap;
- struct device *dev = cs35l41->dev;
- int ret;
-
- switch (boost_ind) {
- case 1000: /* 1.0 uH */
- bst_lbst_val = 0;
- break;
- case 1200: /* 1.2 uH */
- bst_lbst_val = 1;
- break;
- case 1500: /* 1.5 uH */
- bst_lbst_val = 2;
- break;
- case 2200: /* 2.2 uH */
- bst_lbst_val = 3;
- break;
- default:
- dev_err(dev, "Invalid boost inductor value: %d nH\n", boost_ind);
- return -EINVAL;
- }
-
- switch (boost_cap) {
- case 0 ... 19:
- bst_cbst_range = 0;
- break;
- case 20 ... 50:
- bst_cbst_range = 1;
- break;
- case 51 ... 100:
- bst_cbst_range = 2;
- break;
- case 101 ... 200:
- bst_cbst_range = 3;
- break;
- default: /* 201 uF and greater */
- bst_cbst_range = 4;
- }
-
- ret = regmap_update_bits(regmap, CS35L41_BSTCVRT_COEFF,
- CS35L41_BST_K1_MASK | CS35L41_BST_K2_MASK,
- cs35l41_bst_k1_table[bst_lbst_val][bst_cbst_range]
- << CS35L41_BST_K1_SHIFT |
- cs35l41_bst_k2_table[bst_lbst_val][bst_cbst_range]
- << CS35L41_BST_K2_SHIFT);
- if (ret) {
- dev_err(dev, "Failed to write boost coefficients: %d\n", ret);
- return ret;
- }
-
- ret = regmap_update_bits(regmap, CS35L41_BSTCVRT_SLOPE_LBST,
- CS35L41_BST_SLOPE_MASK | CS35L41_BST_LBST_VAL_MASK,
- cs35l41_bst_slope_table[bst_lbst_val]
- << CS35L41_BST_SLOPE_SHIFT |
- bst_lbst_val << CS35L41_BST_LBST_VAL_SHIFT);
- if (ret) {
- dev_err(dev, "Failed to write boost slope/inductor value: %d\n", ret);
- return ret;
- }
-
- if (boost_ipk < 1600 || boost_ipk > 4500) {
- dev_err(dev, "Invalid boost inductor peak current: %d mA\n",
- boost_ipk);
- return -EINVAL;
- }
- bst_ipk_scaled = ((boost_ipk - 1600) / 50) + 0x10;
-
- ret = regmap_update_bits(regmap, CS35L41_BSTCVRT_PEAK_CUR,
- CS35L41_BST_IPK_MASK,
- bst_ipk_scaled << CS35L41_BST_IPK_SHIFT);
- if (ret) {
- dev_err(dev, "Failed to write boost inductor peak current: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
static int cs35l41_set_pdata(struct cs35l41_private *cs35l41)
{
int ret;
@@ -1077,9 +977,8 @@ static int cs35l41_set_pdata(struct cs35l41_private *cs35l41)
/* Required */
if (cs35l41->pdata.bst_ipk &&
cs35l41->pdata.bst_ind && cs35l41->pdata.bst_cap) {
- ret = cs35l41_boost_config(cs35l41, cs35l41->pdata.bst_ind,
- cs35l41->pdata.bst_cap,
- cs35l41->pdata.bst_ipk);
+ ret = cs35l41_boost_config(cs35l41->dev, cs35l41->regmap, cs35l41->pdata.bst_ind,
+ cs35l41->pdata.bst_cap, cs35l41->pdata.bst_ipk);
if (ret) {
dev_err(cs35l41->dev, "Error in Boost DT config: %d\n", ret);
return ret;
--
2.34.0
next prev parent reply other threads:[~2021-11-23 16:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-23 16:31 [PATCH v3 00/11] Add support for Legion 7 16ACHg6 laptop Lucas Tanure
2021-11-23 16:31 ` [PATCH 01/11] ASoC: cs35l41: Set the max SPI speed for the whole device Lucas Tanure
2021-11-23 18:02 ` Charles Keepax
2021-11-23 16:31 ` [PATCH 02/11] ASoC: cs35l41: Convert tables to shared source code Lucas Tanure
2021-11-23 17:53 ` Mark Brown
2021-11-23 18:05 ` Charles Keepax
2021-11-23 16:31 ` [PATCH 03/11] ASoC: cs35l41: Move regmap config struct to shared code Lucas Tanure
2021-11-23 17:20 ` Mark Brown
2021-11-23 16:31 ` [PATCH 04/11] ASoC: cs35l41: Create function for init array of Supplies Lucas Tanure
2021-11-23 17:58 ` Mark Brown
2021-11-24 13:31 ` Mark Brown
2021-11-23 16:31 ` [PATCH 05/11] ASoC: cs35l41: Move cs35l41_otp_unpack to shared code Lucas Tanure
2021-11-23 16:31 ` [PATCH 06/11] ASoC: cs35l41: Move power initializations to reg_sequence Lucas Tanure
2021-11-23 16:31 ` [PATCH 07/11] ASoC: cs35l41: Create shared function for errata patches Lucas Tanure
2021-11-23 16:31 ` [PATCH 08/11] ASoC: cs35l41: Create shared function for setting channels Lucas Tanure
2021-11-23 16:31 ` Lucas Tanure [this message]
2021-11-23 16:31 ` [PATCH 10/11] hda: cs35l41: Add support for CS35L41 in HDA systems Lucas Tanure
2021-11-23 16:52 ` Takashi Iwai
2021-11-23 16:59 ` Pierre-Louis Bossart
2021-11-23 17:06 ` tanureal
2021-11-23 17:16 ` Pierre-Louis Bossart
2021-11-23 17:15 ` Mark Brown
2021-11-23 16:31 ` [PATCH 11/11] ACPI / scan: Create platform device for CLSA0100 ACPI nodes Lucas Tanure
2021-11-23 17:05 ` Hans de Goede
2021-11-23 17:11 ` Lucas tanure
2021-11-23 18:35 ` Hans de Goede
2021-11-23 23:01 ` Andy Shevchenko
2021-11-24 17:36 ` (subset) [PATCH v3 00/11] Add support for Legion 7 16ACHg6 laptop Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211123163149.1530535-10-tanureal@opensource.cirrus.com \
--to=tanureal@opensource.cirrus.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=cam@neo-zeon.de \
--cc=chris.chiu@canonical.com \
--cc=david.rhodes@cirrus.com \
--cc=eliadevito@gmail.com \
--cc=hdegoede@redhat.com \
--cc=hui.wang@canonical.com \
--cc=jack.yu@realtek.com \
--cc=jeremy.szu@canonical.com \
--cc=kailang@realtek.com \
--cc=lars@metafoo.de \
--cc=lenb@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=sami@loone.fi \
--cc=shumingf@realtek.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
--cc=vitalyr@opensource.cirrus.com \
--cc=wse@tuxedocomputers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®