[PATCH 1/4] extcon: int3496: Make the driver a bit less verbose

[Hans de Goede <hdegoede@redhat.com>]

On all devices which I have with an INT3496 ACPI device,
there is only an ID pin defined.

Change the log-messages about not being able to get GPIOs for
"VBUS EN" and "USB MUX" to use dev_dbg().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/extcon/extcon-intel-int3496.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index fb527c23639e..df6ab4ef46f5 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -121,11 +121,11 @@ static int int3496_probe(struct platform_device *pdev)
 
 	data->gpio_vbus_en = devm_gpiod_get(dev, "vbus", GPIOD_ASIS);
 	if (IS_ERR(data->gpio_vbus_en))
-		dev_info(dev, "can't request VBUS EN GPIO\n");
+		dev_dbg(dev, "can't request VBUS EN GPIO\n");
 
 	data->gpio_usb_mux = devm_gpiod_get(dev, "mux", GPIOD_ASIS);
 	if (IS_ERR(data->gpio_usb_mux))
-		dev_info(dev, "can't request USB MUX GPIO\n");
+		dev_dbg(dev, "can't request USB MUX GPIO\n");
 
 	/* register extcon device */
 	data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
-- 
2.33.1