[PATCH] pps: clients: gpio: Propagate return value from pps_gpio_probe

[Robert Hancock <robert.hancock@calian.com>]

If the pps-gpio driver was probed prior to the GPIO device it uses, the
devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe
replaced that error code with -EINVAL, causing the pps-gpio probe to
fail and not be retried later. Propagate the error return value so that
deferred probe works properly.

Fixes: 161520451dfa (pps: new client driver using GPIO)
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 drivers/pps/clients/pps-gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index 35799e6401c9..2f4b11b4dfcd 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -169,7 +169,7 @@ static int pps_gpio_probe(struct platform_device *pdev)
 	/* GPIO setup */
 	ret = pps_gpio_setup(dev);
 	if (ret)
-		return -EINVAL;
+		return ret;
 
 	/* IRQ setup */
 	ret = gpiod_to_irq(data->gpio_pin);
-- 
2.31.1