[PATCH v2 7/8] i2c: piix4: Add EFCH MMIO support for SMBus port select

[Terry Bowman <terry.bowman@amd.com>]

AMD processors include registers capable of selecting between 2 SMBus
ports. Port selection is made during each user access by writing to
FCH::PM::DECODEEN[smbus0sel]. Change the driver to use MMIO during
SMBus port selection because cd6h/cd7h port I/O is not available on
later AMD processors.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
To: Guenter Roeck <linux@roeck-us.net>
To: linux-watchdog@vger.kernel.org
To: Jean Delvare <jdelvare@suse.com>
To: linux-i2c@vger.kernel.org
To: Wolfram Sang <wsa@kernel.org>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
---
 drivers/i2c/busses/i2c-piix4.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 2937f3254c31..b59d2c74abf6 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -755,19 +755,28 @@ static void piix4_imc_wakeup(void)
 	release_region(KERNCZ_IMC_IDX, 2);
 }
 
-static int piix4_sb800_port_sel(u8 port)
+static int piix4_sb800_port_sel(u8 port, struct sb800_mmio_cfg *mmio_cfg)
 {
 	u8 smba_en_lo;
 
-	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	if (mmio_cfg->use_mmio) {
+		smba_en_lo = ioread8(mmio_cfg->addr + piix4_port_sel_sb800);
+
+		if ((smba_en_lo & piix4_port_mask_sb800) != port)
+			iowrite8((smba_en_lo & ~piix4_port_mask_sb800) | port,
+				 mmio_cfg->addr + piix4_port_sel_sb800);
+	} else {
+		outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
+		smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
-	if ((smba_en_lo & piix4_port_mask_sb800) != port)
-		outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
-		       SB800_PIIX4_SMB_IDX + 1);
+		if ((smba_en_lo & piix4_port_mask_sb800) != port)
+			outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
+			       SB800_PIIX4_SMB_IDX + 1);
+	}
 
 	return (smba_en_lo & piix4_port_mask_sb800);
 }
+
 /*
  * Handles access to multiple SMBus ports on the SB800.
  * The port is selected by bits 2:1 of the smb_en register (0x2c).
@@ -844,12 +853,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 		}
 	}
 
-	prev_port = piix4_sb800_port_sel(adapdata->port);
+	prev_port = piix4_sb800_port_sel(adapdata->port, &adapdata->mmio_cfg);
 
 	retval = piix4_access(adap, addr, flags, read_write,
 			      command, size, data);
 
-	piix4_sb800_port_sel(prev_port);
+	piix4_sb800_port_sel(prev_port, &adapdata->mmio_cfg);
 
 	/* Release the semaphore */
 	outb_p(smbslvcnt | 0x20, SMBSLVCNT);
-- 
2.30.2