mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 0/2] ic2: mux: pca9541: add delayed-release support
@ 2022-01-24 21:38 Zev Weiss
  2022-01-24 21:38 ` [PATCH 1/2] i2c: " Zev Weiss
  2022-01-24 21:38 ` [PATCH 2/2] dt-bindings: i2c: add nxp,pca9541 release-delay-us property Zev Weiss
  0 siblings, 2 replies; 4+ messages in thread
From: Zev Weiss @ 2022-01-24 21:38 UTC (permalink / raw)
  To: linux-i2c, Guenter Roeck, Peter Rosin, Rob Herring
  Cc: Zev Weiss, openbmc, linux-kernel, devicetree

Hello,

This series adds support for a new pca9541 device-tree property
("release-delay-us"), which delays releasing ownership of the bus
after a transaction for a configurable duration, anticipating that
another transaction may follow shortly.  By avoiding a
release/reacquisition between transactions, this can provide a
substantial performance improvement for back-to-back operations -- on
a Delta AHE-50DC (ASPEED AST1250) system running OpenBMC with LM25066
PMICs behind PCA9541-arbitrated busses, a setting of 10000 (10 ms)
reduces the median latency of reading hwmon sysfs files from 2.28 ms
to 0.99 ms (a 57% improvement).


Thanks,
Zev

Zev Weiss (2):
  i2c: mux: pca9541: add delayed-release support
  dt-bindings: i2c: add nxp,pca9541 release-delay-us property

 .../devicetree/bindings/i2c/nxp,pca9541.txt   | 10 ++++
 drivers/i2c/muxes/i2c-mux-pca9541.c           | 56 ++++++++++++++++---
 2 files changed, 57 insertions(+), 9 deletions(-)

-- 
2.34.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2022-01-31  6:21 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-24 21:38 [PATCH 0/2] ic2: mux: pca9541: add delayed-release support Zev Weiss
2022-01-24 21:38 ` [PATCH 1/2] i2c: " Zev Weiss
2022-01-31  6:21   ` Joel Stanley
2022-01-24 21:38 ` [PATCH 2/2] dt-bindings: i2c: add nxp,pca9541 release-delay-us property Zev Weiss

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®