From: Sun Shouxin <sunshouxin@chinatelecom.cn>
To: j.vosburgh@gmail.com, vfalico@gmail.com, andy@greyhouse.net,
davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
jay.vosburgh@canonical.com, nikolay@nvidia.com,
huyd12@chinatelecom.cn
Subject: [PATCH v10] net: bonding: Add support for IPV6 ns/na to balance-alb/balance-tlb mode
Date: Tue, 25 Jan 2022 09:24:18 -0500 [thread overview]
Message-ID: <20220125142418.96167-1-sunshouxin@chinatelecom.cn> (raw)
Since ipv6 neighbor solicitation and advertisement messages
isn't handled gracefully in bond6 driver, we can see packet
drop due to inconsistency between mac address in the option
message and source MAC .
Another examples is ipv6 neighbor solicitation and advertisement
messages from VM via tap attached to host bridge, the src mac
might be changed through balance-alb mode, but it is not synced
with Link-layer address in the option message.
The patch implements bond6's tx handle for ipv6 neighbor
solicitation and advertisement messages.
Suggested-by: Hu Yadi <huyd12@chinatelecom.cn>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn>
---
v9->v10:
- add IPv6 header pull in alb_determine_nd.
- combine bond_xmit_alb_slave_get's IPv6 header
pull with alb_determine_nd's
---
drivers/net/bonding/bond_alb.c | 40 ++++++++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 533e476988f2..d9da6eb7f5c2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1269,6 +1269,37 @@ static int alb_set_mac_address(struct bonding *bond, void *addr)
return res;
}
+/* determine if the packet is NA or NS */
+static bool __alb_determine_nd(struct icmp6hdr *hdr)
+{
+ if (hdr->icmp6_type == NDISC_NEIGHBOUR_ADVERTISEMENT ||
+ hdr->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION) {
+ return true;
+ }
+
+ return false;
+}
+
+static bool alb_determine_nd(struct sk_buff *skb, struct bonding *bond)
+{
+ struct ipv6hdr *ip6hdr;
+ struct icmp6hdr *hdr;
+
+ if (!pskb_network_may_pull(skb, sizeof(*ip6hdr)))
+ return true;
+
+ ip6hdr = ipv6_hdr(skb);
+ if (ip6hdr->nexthdr == IPPROTO_ICMPV6) {
+ if (!pskb_may_pull(skb, sizeof(*ip6hdr) + sizeof(*hdr)))
+ return true;
+
+ hdr = icmp6_hdr(skb);
+ return __alb_determine_nd(hdr);
+ }
+
+ return false;
+}
+
/************************ exported alb functions ************************/
int bond_alb_initialize(struct bonding *bond, int rlb_enabled)
@@ -1348,8 +1379,11 @@ struct slave *bond_xmit_tlb_slave_get(struct bonding *bond,
/* Do not TX balance any multicast or broadcast */
if (!is_multicast_ether_addr(eth_data->h_dest)) {
switch (skb->protocol) {
- case htons(ETH_P_IP):
case htons(ETH_P_IPV6):
+ if (alb_determine_nd(skb, bond))
+ break;
+ fallthrough;
+ case htons(ETH_P_IP):
hash_index = bond_xmit_hash(bond, skb);
if (bond->params.tlb_dynamic_lb) {
tx_slave = tlb_choose_channel(bond,
@@ -1432,10 +1466,12 @@ struct slave *bond_xmit_alb_slave_get(struct bonding *bond,
break;
}
- if (!pskb_network_may_pull(skb, sizeof(*ip6hdr))) {
+ if (alb_determine_nd(skb, bond)) {
do_tx_balance = false;
break;
}
+
+ /* The IPv6 header is pulled by alb_determine_nd */
/* Additionally, DAD probes should not be tx-balanced as that
* will lead to false positives for duplicate addresses and
* prevent address configuration from working.
base-commit: dd81e1c7d5fb126e5fbc5c9e334d7b3ec29a16a0
--
2.27.0
next reply other threads:[~2022-01-25 14:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 14:24 Sun Shouxin [this message]
2022-01-28 2:47 ` Jakub Kicinski
2022-01-28 11:46 ` 孙守鑫
2022-01-28 2:39 Sun Shouxin
2022-01-28 2:45 ` 孙守鑫
2022-01-28 2:51 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125142418.96167-1-sunshouxin@chinatelecom.cn \
--to=sunshouxin@chinatelecom.cn \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=huyd12@chinatelecom.cn \
--cc=j.vosburgh@gmail.com \
--cc=jay.vosburgh@canonical.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nikolay@nvidia.com \
--cc=vfalico@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®