From: Michal Hocko <mhocko@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>, LKML <linux-kernel@vger.kernel.org>,
David Hildenbrand <david@redhat.com>,
Alexey Makhalov <amakhalov@vmware.com>,
Dennis Zhou <dennis@kernel.org>,
Eric Dumazet <eric.dumazet@gmail.com>,
Oscar Salvador <osalvador@suse.de>, Tejun Heo <tj@kernel.org>,
Christoph Lameter <cl@linux.com>, Nico Pache <npache@redhat.com>,
Wei Yang <richard.weiyang@gmail.com>,
Rafael Aquini <raquini@redhat.com>,
Michal Hocko <mhocko@suse.com>
Subject: [PATCH 4/6] mm, memory_hotplug: reorganize new pgdat initialization
Date: Thu, 27 Jan 2022 09:53:03 +0100 [thread overview]
Message-ID: <20220127085305.20890-5-mhocko@kernel.org> (raw)
In-Reply-To: <20220127085305.20890-1-mhocko@kernel.org>
From: Michal Hocko <mhocko@suse.com>
When a !node_online node is brought up it needs a hotplug specific
initialization because the node could be either uninitialized yet or it
could have been recycled after previous hotremove. hotadd_init_pgdat is
responsible for that.
Internal pgdat state is initialized at two places currently
- hotadd_init_pgdat
- free_area_init_core_hotplug
There is no real clear cut what should go where but this patch's chosen to
move the whole internal state initialization into free_area_init_core_hotplug.
hotadd_init_pgdat is still responsible to pull all the parts together -
most notably to initialize zonelists because those depend on the overall topology.
This patch doesn't introduce any functional change.
Acked-by: Rafael Aquini <raquini@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
---
include/linux/memory_hotplug.h | 2 +-
mm/memory_hotplug.c | 28 +++-------------------------
mm/page_alloc.c | 25 +++++++++++++++++++++++--
3 files changed, 27 insertions(+), 28 deletions(-)
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 60f09d3ebb3d..76bf2de86def 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -319,7 +319,7 @@ extern void set_zone_contiguous(struct zone *zone);
extern void clear_zone_contiguous(struct zone *zone);
#ifdef CONFIG_MEMORY_HOTPLUG
-extern void __ref free_area_init_core_hotplug(int nid);
+extern void __ref free_area_init_core_hotplug(struct pglist_data *pgdat);
extern int __add_memory(int nid, u64 start, u64 size, mhp_t mhp_flags);
extern int add_memory(int nid, u64 start, u64 size, mhp_t mhp_flags);
extern int add_memory_resource(int nid, struct resource *resource,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 875cdc7ffa58..ddc62f8b591f 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1166,39 +1166,16 @@ static pg_data_t __ref *hotadd_init_pgdat(int nid)
{
struct pglist_data *pgdat;
- pgdat = NODE_DATA(nid);
-
/*
* NODE_DATA is preallocated (free_area_init) but its internal
* state is not allocated completely. Add missing pieces.
* Completely offline nodes stay around and they just need
* reintialization.
*/
- if (pgdat->per_cpu_nodestats == &boot_nodestats) {
- pgdat->per_cpu_nodestats =
- alloc_percpu(struct per_cpu_nodestat);
- } else {
- int cpu;
- /*
- * Reset the nr_zones, order and highest_zoneidx before reuse.
- * Note that kswapd will init kswapd_highest_zoneidx properly
- * when it starts in the near future.
- */
- pgdat->nr_zones = 0;
- pgdat->kswapd_order = 0;
- pgdat->kswapd_highest_zoneidx = 0;
- for_each_online_cpu(cpu) {
- struct per_cpu_nodestat *p;
-
- p = per_cpu_ptr(pgdat->per_cpu_nodestats, cpu);
- memset(p, 0, sizeof(*p));
- }
- }
-
- pgdat->node_start_pfn = 0;
+ pgdat = NODE_DATA(nid);
/* init node's zones as empty zones, we don't have any present pages.*/
- free_area_init_core_hotplug(nid);
+ free_area_init_core_hotplug(pgdat);
/*
* The node we allocated has no zone fallback lists. For avoiding
@@ -1210,6 +1187,7 @@ static pg_data_t __ref *hotadd_init_pgdat(int nid)
* When memory is hot-added, all the memory is in offline state. So
* clear all zones' present_pages because they will be updated in
* online_pages() and offline_pages().
+ * TODO: should be in free_area_init_core_hotplug?
*/
reset_node_managed_pages(pgdat);
reset_node_present_pages(pgdat);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 1a05669044d3..32d0189de4c5 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7506,12 +7506,33 @@ static void __meminit zone_init_internals(struct zone *zone, enum zone_type idx,
* NOTE: this function is only called during memory hotplug
*/
#ifdef CONFIG_MEMORY_HOTPLUG
-void __ref free_area_init_core_hotplug(int nid)
+void __ref free_area_init_core_hotplug(struct pglist_data *pgdat)
{
+ int nid = pgdat->node_id;
enum zone_type z;
- pg_data_t *pgdat = NODE_DATA(nid);
+ int cpu;
pgdat_init_internals(pgdat);
+
+ if (pgdat->per_cpu_nodestats == &boot_nodestats)
+ pgdat->per_cpu_nodestats = alloc_percpu(struct per_cpu_nodestat);
+
+ /*
+ * Reset the nr_zones, order and highest_zoneidx before reuse.
+ * Note that kswapd will init kswapd_highest_zoneidx properly
+ * when it starts in the near future.
+ */
+ pgdat->nr_zones = 0;
+ pgdat->kswapd_order = 0;
+ pgdat->kswapd_highest_zoneidx = 0;
+ pgdat->node_start_pfn = 0;
+ for_each_online_cpu(cpu) {
+ struct per_cpu_nodestat *p;
+
+ p = per_cpu_ptr(pgdat->per_cpu_nodestats, cpu);
+ memset(p, 0, sizeof(*p));
+ }
+
for (z = 0; z < MAX_NR_ZONES; z++)
zone_init_internals(&pgdat->node_zones[z], z, nid, 0);
}
--
2.30.2
next prev parent reply other threads:[~2022-01-27 8:53 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 8:52 [PATCH 0/6] mm, memory_hotplug: handle unitialized numa node gracefully Michal Hocko
2022-01-27 8:53 ` [PATCH 1/6] mm, memory_hotplug: make arch_alloc_nodedata independent on CONFIG_MEMORY_HOTPLUG Michal Hocko
2022-01-27 12:27 ` David Hildenbrand
2022-01-27 13:36 ` Mike Rapoport
2022-01-28 6:18 ` Oscar Salvador
2022-02-01 2:13 ` Wei Yang
2022-01-27 8:53 ` [PATCH 2/6] mm: handle uninitialized numa nodes gracefully Michal Hocko
2022-01-27 12:41 ` David Hildenbrand
2022-01-27 14:50 ` Michal Hocko
2022-01-27 13:37 ` Mike Rapoport
2022-01-27 14:47 ` Michal Hocko
2022-01-27 15:04 ` Mike Rapoport
2022-02-01 2:41 ` Wei Yang
2022-02-01 9:54 ` Michal Hocko
2022-02-03 0:21 ` Wei Yang
2022-02-03 7:23 ` Mike Rapoport
2022-02-03 8:27 ` David Hildenbrand
2022-02-03 9:08 ` Mike Rapoport
2022-02-03 9:11 ` David Hildenbrand
2022-02-03 9:19 ` Michal Hocko
2022-02-03 9:21 ` David Hildenbrand
2022-02-03 8:39 ` Michal Hocko
2022-02-04 22:54 ` Andrew Morton
2022-01-28 6:27 ` Oscar Salvador
2022-01-31 10:34 ` Michal Hocko
2022-01-27 8:53 ` [PATCH 3/6] mm, memory_hotplug: drop arch_free_nodedata Michal Hocko
2022-01-27 12:42 ` David Hildenbrand
2022-01-27 13:37 ` Mike Rapoport
2022-01-28 6:29 ` Oscar Salvador
2022-02-01 2:41 ` Wei Yang
2022-01-27 8:53 ` Michal Hocko [this message]
2022-01-27 12:46 ` [PATCH 4/6] mm, memory_hotplug: reorganize new pgdat initialization David Hildenbrand
2022-01-27 14:44 ` Michal Hocko
2022-02-17 10:40 ` Oscar Salvador
2022-01-27 13:39 ` Mike Rapoport
2022-01-27 14:45 ` Michal Hocko
2022-01-28 10:51 ` Oscar Salvador
2022-02-01 2:42 ` Wei Yang
2022-01-27 8:53 ` [PATCH 5/6] mm: make free_area_init_node aware of memory less nodes Michal Hocko
2022-01-27 12:47 ` David Hildenbrand
2022-01-27 13:34 ` Mike Rapoport
2022-01-28 10:59 ` Oscar Salvador
2022-02-01 2:43 ` Wei Yang
2022-01-27 8:53 ` [PATCH 6/6] memcg: do not tweak node in alloc_mem_cgroup_per_node_info Michal Hocko
2022-01-27 12:50 ` David Hildenbrand
2022-01-28 11:01 ` Oscar Salvador
2022-02-01 2:45 ` Wei Yang
2022-02-01 9:51 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220127085305.20890-5-mhocko@kernel.org \
--to=mhocko@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=amakhalov@vmware.com \
--cc=cl@linux.com \
--cc=david@redhat.com \
--cc=dennis@kernel.org \
--cc=eric.dumazet@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=npache@redhat.com \
--cc=osalvador@suse.de \
--cc=raquini@redhat.com \
--cc=richard.weiyang@gmail.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome