From: Lai Jiangshan <jiangshanlai@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, Lai Jiangshan <jiangshan.ljs@antgroup.com>,
Andy Lutomirski <luto@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Peter Zijlstra <peterz@infradead.org>,
Fenghua Yu <fenghua.yu@intel.com>, Joerg Roedel <jroedel@suse.de>,
"Chang S. Bae" <chang.seok.bae@intel.com>
Subject: [PATCH V2 1/7] x86/traps: Move pt_regs only in fixup_bad_iret()
Date: Thu, 3 Mar 2022 11:54:28 +0800 [thread overview]
Message-ID: <20220303035434.20471-2-jiangshanlai@gmail.com> (raw)
In-Reply-To: <20220303035434.20471-1-jiangshanlai@gmail.com>
From: Lai Jiangshan <jiangshan.ljs@antgroup.com>
fixup_bad_iret() and sync_regs() have similar arguments and do similar
work that copies full or partial pt_regs to a place and switches stack
after return. They are quite the same, but fixup_bad_iret() not only
copies the pt_regs but also the return address of error_entry() while
sync_regs() copies the pt_regs only and the return address of
error_entry() was preserved and handled in ASM code.
This patch makes fixup_bad_iret() work like sync_regs() and the
handling of the return address of error_entry() is moved in ASM code.
It removes the need to use the struct bad_iret_stack, simplifies
fixup_bad_iret() and makes the ASM error_entry() call fixup_bad_iret()
as the same as calling sync_regs() which adds readability because
the calling patterns are exactly the same.
It is prepared for later patch to do the stack switch after the
error_entry() which simplifies the code further.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
---
arch/x86/entry/entry_64.S | 5 ++++-
arch/x86/include/asm/traps.h | 2 +-
arch/x86/kernel/traps.c | 17 ++++++-----------
3 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 466df3e50276..24846284eda5 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1039,9 +1039,12 @@ SYM_CODE_START_LOCAL(error_entry)
* Pretend that the exception came from user mode: set up pt_regs
* as if we faulted immediately after IRET.
*/
- mov %rsp, %rdi
+ popq %r12 /* save return addr in %12 */
+ movq %rsp, %rdi /* arg0 = pt_regs pointer */
call fixup_bad_iret
mov %rax, %rsp
+ ENCODE_FRAME_POINTER
+ pushq %r12
jmp .Lerror_entry_from_usermode_after_swapgs
SYM_CODE_END(error_entry)
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 6221be7cafc3..1cdd7e8bcba7 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -13,7 +13,7 @@
#ifdef CONFIG_X86_64
asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs);
asmlinkage __visible notrace
-struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s);
+struct pt_regs *fixup_bad_iret(struct pt_regs *bad_regs);
void __init trap_init(void);
asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *eregs);
#endif
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7ef00dee35be..2b1f049afb14 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -816,13 +816,8 @@ asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *r
}
#endif
-struct bad_iret_stack {
- void *error_entry_ret;
- struct pt_regs regs;
-};
-
asmlinkage __visible noinstr
-struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
+struct pt_regs *fixup_bad_iret(struct pt_regs *bad_regs)
{
/*
* This is called from entry_64.S early in handling a fault
@@ -832,19 +827,19 @@ struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
* just below the IRET frame) and we want to pretend that the
* exception came from the IRET target.
*/
- struct bad_iret_stack tmp, *new_stack =
- (struct bad_iret_stack *)__this_cpu_read(cpu_tss_rw.x86_tss.sp0) - 1;
+ struct pt_regs tmp, *new_stack =
+ (struct pt_regs *)__this_cpu_read(cpu_tss_rw.x86_tss.sp0) - 1;
/* Copy the IRET target to the temporary storage. */
- __memcpy(&tmp.regs.ip, (void *)s->regs.sp, 5*8);
+ __memcpy(&tmp.ip, (void *)bad_regs->sp, 5*8);
/* Copy the remainder of the stack from the current stack. */
- __memcpy(&tmp, s, offsetof(struct bad_iret_stack, regs.ip));
+ __memcpy(&tmp, bad_regs, offsetof(struct pt_regs, ip));
/* Update the entry stack */
__memcpy(new_stack, &tmp, sizeof(tmp));
- BUG_ON(!user_mode(&new_stack->regs));
+ BUG_ON(!user_mode(new_stack));
return new_stack;
}
#endif
--
2.19.1.6.gb485710b
next prev parent reply other threads:[~2022-03-03 3:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-03 3:54 [PATCH V2 0/7] x86/entry: Clean up entry code Lai Jiangshan
2022-03-03 3:54 ` Lai Jiangshan [this message]
2022-03-03 3:54 ` [PATCH V2 2/7] x86/entry: Switch the stack after error_entry() returns Lai Jiangshan
2022-03-03 8:00 ` Peter Zijlstra
2022-03-07 14:39 ` Lai Jiangshan
2022-03-03 3:54 ` [PATCH V2 3/7] x86/entry: move PUSH_AND_CLEAR_REGS out of error_entry Lai Jiangshan
2022-03-03 8:54 ` Peter Zijlstra
2022-03-07 14:53 ` Lai Jiangshan
2022-03-03 3:54 ` [PATCH V2 4/7] x86/entry: Move cld to the start of idtentry Lai Jiangshan
2022-03-03 3:54 ` [PATCH V2 5/7] x86/entry: Don't call error_entry for XENPV Lai Jiangshan
2022-03-03 3:54 ` [PATCH V2 6/7] x86/entry: Use idtentry macro for entry_INT80_compat Lai Jiangshan
2022-03-03 3:54 ` [PATCH V2 7/7] x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS Lai Jiangshan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220303035434.20471-2-jiangshanlai@gmail.com \
--to=jiangshanlai@gmail.com \
--cc=bp@alien8.de \
--cc=chang.seok.bae@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=jiangshan.ljs@antgroup.com \
--cc=jroedel@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®