[GIT PULL] regulator updates for v5.18

[GIT PULL] regulator updates for v5.18

[Mark Brown]

The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07:

  Linux 5.17-rc1 (2022-01-23 10:12:53 +0200)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v5.18

for you to fetch changes up to 5999f85ddeb436b4007878f251a30ccc8b9c638b:

  regulator: qcom-rpmh: Add support for SDX65 (2022-03-18 16:05:06 +0000)

----------------------------------------------------------------
regulator: Updates for v5.18

Quite a quiet release for the regulator API, mainly a few new drivers
plus a lot of fixes for the Raspberry Pi panel driver.  There's also a
SPI commit in here which I managed to apply to the wrong tree and then
didn't notice until there were too many commits on top of it, sorry
about that.

 - Make it easier to use the virtual consumer test driver with DT
   systems.
 - Substantial overhaul providing various fixes and robustness
   improvements for the Raspberry Pi panel driver.
 - Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas
   Instruments TPS62864x

----------------------------------------------------------------
Alexander Stein (1):
      regulator: pfuze100: Add missing regulator names

ChiYuan Huang (2):
      regulator: Add bindings for Richtek RT5190A PMIC
      regulator: rt5190a: Add support for Richtek RT5190A PMIC

Christophe JAILLET (1):
      spi: qcom: geni: Simplify DMA setting

Dave Stevenson (9):
      regulator: rpi-panel: Register with a unique backlight name
      regulator: rpi-panel: Handle I2C errors/timing to the Atmel
      regulator: rpi-panel: Serialise operations.
      regulator: rpi-panel: Ensure the backlight is off during probe.
      regulator: rpi-panel: Convert to drive lines directly
      regulator: rpi-panel: Add GPIO control for panel and touch resets
      regulator: rpi-panel: Remove get_brightness hook
      regulator/rpi-panel-attiny: Use the regmap cache
      regulator/rpi-panel-attiny: Use two transactions for I2C read

Georgi Vlaev (1):
      regulator: Convert TPS62360 binding to json-schema

Haowen Bai (1):
      regulator: vctrl: Use min() instead of doing it manually

Mark Brown (1):
      Merge existing fixes from regulator/for-5.17 into new branch

Rob Herring (1):
      regulator: maxim,max8973: Drop Tegra specifics from example

Rohit Agarwal (2):
      regulator: dt-bindings: Add PMX65 compatibles
      regulator: qcom-rpmh: Add support for SDX65

Tom Rix (1):
      regulator: cleanup comments

Vincent Whitchurch (6):
      regulator: Add bindings for TPS62864x
      regulator: Add support for TPS6286x
      regulator: tps62864: Fix bindings for SW property
      regulator: virtual: use dev_err_probe()
      regulator: virtual: warn against production use
      regulator: virtual: add devicetree support

kernel test robot (1):
      regulator: qcom_smd: fix for_each_child.cocci warnings

 .../bindings/regulator/maxim,max8973.yaml          |   5 +-
 .../devicetree/bindings/regulator/pfuze100.yaml    |   6 +-
 .../bindings/regulator/qcom,rpmh-regulator.yaml    |   2 +
 .../regulator/richtek,rt5190a-regulator.yaml       | 141 ++++++
 .../devicetree/bindings/regulator/ti,tps62360.yaml |  98 ++++
 .../devicetree/bindings/regulator/ti,tps62864.yaml |  63 +++
 .../bindings/regulator/tps62360-regulator.txt      |  44 --
 drivers/regulator/Kconfig                          |  20 +
 drivers/regulator/Makefile                         |   2 +
 drivers/regulator/max20086-regulator.c             |   3 +-
 drivers/regulator/max8973-regulator.c              |   2 +-
 drivers/regulator/qcom-rpmh-regulator.c            |  37 ++
 drivers/regulator/qcom_smd-regulator.c             |   4 +-
 drivers/regulator/rpi-panel-attiny-regulator.c     | 291 ++++++++++--
 drivers/regulator/rt5190a-regulator.c              | 513 +++++++++++++++++++++
 drivers/regulator/sc2731-regulator.c               |   2 +-
 drivers/regulator/ti-abb-regulator.c               |   6 +-
 drivers/regulator/tps6286x-regulator.c             | 159 +++++++
 drivers/regulator/vctrl-regulator.c                |   5 +-
 drivers/regulator/virtual.c                        |  41 +-
 drivers/regulator/wm8350-regulator.c               |   2 +-
 drivers/spi/spi-geni-qcom.c                        |   7 +-
 .../regulator/richtek,rt5190a-regulator.h          |  15 +
 include/dt-bindings/regulator/ti,tps62864.h        |   9 +
 24 files changed, 1362 insertions(+), 115 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
 delete mode 100644 Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
 create mode 100644 drivers/regulator/rt5190a-regulator.c
 create mode 100644 drivers/regulator/tps6286x-regulator.c
 create mode 100644 include/dt-bindings/regulator/richtek,rt5190a-regulator.h
 create mode 100644 include/dt-bindings/regulator/ti,tps62864.h

Re: [GIT PULL] regulator updates for v5.18

[pr-tracker-bot]

The pull request you sent on Mon, 21 Mar 2022 12:35:47 +0000:

> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v5.18

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/d6ccf45113fb6799885950293401e4b104c9b276

Thank you!

-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html