From: <Gireesh.Hiremath@in.bosch.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <robh+dt@kernel.org>,
<tony@atomide.com>, <bcousson@baylibre.com>
Cc: <sjoerd.simons@collabora.co.uk>,
<VinayKumar.Shettar@in.bosch.com>,
<Govindaraji.Sivanantham@in.bosch.com>,
<anaclaudia.dias@de.bosch.com>, <Gireesh.Hiremath@in.bosch.com>
Subject: [PATCH 09/15] ARM: dts: am335x: Guardian: Add lcd port
Date: Fri, 25 Mar 2022 10:06:07 +0000 [thread overview]
Message-ID: <20220325100613.1494-10-Gireesh.Hiremath@in.bosch.com> (raw)
In-Reply-To: <20220325100613.1494-1-Gireesh.Hiremath@in.bosch.com>
From: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
* Add port to the node lcdc
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
---
arch/arm/boot/dts/am335x-guardian.dts | 54 +++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index e0186043f18c..75ac8686091a 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -260,6 +260,11 @@
&lcdc {
blue-and-red-wiring = "crossed";
status = "okay";
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <0>;
+ };
+ };
};
&mmc1 {
@@ -405,64 +410,113 @@
lcd_disen_pins: pinmux_lcd_disen_pins {
pinctrl-single,pins = <
+ /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
>;
};
lcd_pins_default: pinmux_lcd_pins_default {
pinctrl-single,pins = <
+ /* (U10) gpmc_ad8.lcd_data23 */
AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T10) gpmc_ad9.lcd_data22 */
AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T11) gpmc_ad10.lcd_data21 */
AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (U12) gpmc_ad11.lcd_data20 */
AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T12) gpmc_ad12.lcd_data19 */
AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (R12) gpmc_ad13.lcd_data18 */
AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (V13) gpmc_ad14.lcd_data17 */
AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (U13) gpmc_ad15.lcd_data16 */
AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* lcd_data0.lcd_data0 */
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data1.lcd_data1 */
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data2.lcd_data2 */
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data3.lcd_data3 */
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data4.lcd_data4 */
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data5.lcd_data5 */
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data6.lcd_data6 */
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data7.lcd_data7 */
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data8.lcd_data8 */
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data9.lcd_data9 */
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data10.lcd_data10 */
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data11.lcd_data11 */
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data12.lcd_data12 */
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data13.lcd_data13 */
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data14.lcd_data14 */
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data15.lcd_data15 */
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_vsync.lcd_vsync */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_hsync.lcd_hsync */
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_pclk.lcd_pclk */
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
>;
};
lcd_pins_sleep: pinmux_lcd_pins_sleep {
pinctrl-single,pins = <
+ /* lcd_data0.lcd_data0 */
AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data1.lcd_data1 */
AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data2.lcd_data2 */
AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data3.lcd_data3 */
AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data4.lcd_data4 */
AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data5.lcd_data5 */
AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data6.lcd_data6 */
AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data7.lcd_data7 */
AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data8.lcd_data8 */
AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data9.lcd_data9 */
AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data10.lcd_data10 */
AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data11.lcd_data11 */
AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data12.lcd_data12 */
AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data13.lcd_data13 */
AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data14.lcd_data14 */
AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data15.lcd_data15 */
AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_vsync.lcd_vsync */
AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_hsync.lcd_hsync */
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_pclk.lcd_pclk */
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
>;
};
--
2.20.1
next prev parent reply other threads:[~2022-03-25 10:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-25 10:05 [PATCH 00/15] am335x, guardian: update board specific dts changes Gireesh.Hiremath
2022-03-25 10:05 ` [PATCH 01/15] ARM: dts: am335x: Guardian: Update NAND partition table Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 02/15] ARM: dts: am335x: Guardian: Rename power button label Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 03/15] ARM: dts: am335x: Guardian: Add keypad Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 04/15] ARM: dts: am335x: Guardian: Disable poweroff support from RTC Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 05/15] ARM: dts: am335x: Guardian: Remove mmc status led Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 06/15] ARM: dts: am335x: Guardian: Update life led Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 07/15] ARM: dts: am335x: Guardian: Update beeper label Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 08/15] ARM: dts: am335x: Guardian: Update regulator node name Gireesh.Hiremath
2022-03-25 10:06 ` Gireesh.Hiremath [this message]
2022-03-25 10:06 ` [PATCH 10/15] ARM: dts: am335x: Guardian: Update backlight parameter Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 11/15] ARM: dts: am335x: Guardian: Enable UART port two Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 12/15] ARM: dts: am335x: Guardian: Disable DMA property of USB1 Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 13/15] ARM: dts: am335x: Guardian: Update interface pinmux Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 14/15] ARM: dts: am335x: Guardian: Add gpio line manes Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 15/15] ARM: dts: am335x: Guardian: Update comments Gireesh.Hiremath
2022-04-21 11:08 ` [PATCH 00/15] am335x, guardian: update board specific dts changes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220325100613.1494-10-Gireesh.Hiremath@in.bosch.com \
--to=gireesh.hiremath@in.bosch.com \
--cc=Govindaraji.Sivanantham@in.bosch.com \
--cc=VinayKumar.Shettar@in.bosch.com \
--cc=anaclaudia.dias@de.bosch.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®