From: <Gireesh.Hiremath@in.bosch.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <robh+dt@kernel.org>,
<tony@atomide.com>, <bcousson@baylibre.com>
Cc: <sjoerd.simons@collabora.co.uk>,
<VinayKumar.Shettar@in.bosch.com>,
<Govindaraji.Sivanantham@in.bosch.com>,
<anaclaudia.dias@de.bosch.com>, <Gireesh.Hiremath@in.bosch.com>
Subject: [PATCH 13/15] ARM: dts: am335x: Guardian: Update interface pinmux
Date: Fri, 25 Mar 2022 10:06:11 +0000 [thread overview]
Message-ID: <20220325100613.1494-14-Gireesh.Hiremath@in.bosch.com> (raw)
In-Reply-To: <20220325100613.1494-1-Gireesh.Hiremath@in.bosch.com>
From: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
* Update interface pinmux for
- poweroff button
- battery and coincell enable
- ASP and Miraculix
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
---
arch/arm/boot/dts/am335x-guardian.dts | 44 ++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 93576f136368..b225210d5e11 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -64,6 +64,11 @@
};
};
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
panel {
compatible = "ti,tilcdc,panel";
pinctrl-names = "default", "sleep";
@@ -401,14 +406,45 @@
&am33xx_pinmux {
pinctrl-names = "default";
- pinctrl-0 = <&clkout2_pin &gpio_pins>;
+ pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
+ guardian_interface_pins: pinmux_interface_pins {
+ pinctrl-single,pins = <
+ /* ADC_BATSENSE_EN */
+ /* (A14) MCASP0_AHCLKx.gpio3[21] */
+ AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* ADC_COINCELL_EN */
+ /* (J16) MII1_TX_EN.gpio3[3] */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* ASP_ENABLE */
+ /* (A13) MCASP0_ACLKx.gpio3[14] */
+ AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ /* (D16) uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
+ /* (D15) uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
+ /*SWITCH-OFF_3V6*/
+ /* (M18) gpio0[1] */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ /* MIRACULIX */
+ /* (H17) gmii1_crs.gpio3[1] */
+ AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* (H18) rmii1_refclk.gpio0[29] */
+ AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* (J18) gmii1_txd3.gpio0[16] */
+ AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 )
+ /* (J17) gmii1_rxdv.gpio3[4] */
+ AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ >;
+ };
+
guardian_beeper_pins: pinmux_dmtimer7_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
@@ -422,12 +458,6 @@
>;
};
- gpio_pins: pinmux_gpio_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
- >;
- };
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
--
2.20.1
next prev parent reply other threads:[~2022-03-25 10:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-25 10:05 [PATCH 00/15] am335x, guardian: update board specific dts changes Gireesh.Hiremath
2022-03-25 10:05 ` [PATCH 01/15] ARM: dts: am335x: Guardian: Update NAND partition table Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 02/15] ARM: dts: am335x: Guardian: Rename power button label Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 03/15] ARM: dts: am335x: Guardian: Add keypad Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 04/15] ARM: dts: am335x: Guardian: Disable poweroff support from RTC Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 05/15] ARM: dts: am335x: Guardian: Remove mmc status led Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 06/15] ARM: dts: am335x: Guardian: Update life led Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 07/15] ARM: dts: am335x: Guardian: Update beeper label Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 08/15] ARM: dts: am335x: Guardian: Update regulator node name Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 09/15] ARM: dts: am335x: Guardian: Add lcd port Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 10/15] ARM: dts: am335x: Guardian: Update backlight parameter Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 11/15] ARM: dts: am335x: Guardian: Enable UART port two Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 12/15] ARM: dts: am335x: Guardian: Disable DMA property of USB1 Gireesh.Hiremath
2022-03-25 10:06 ` Gireesh.Hiremath [this message]
2022-03-25 10:06 ` [PATCH 14/15] ARM: dts: am335x: Guardian: Add gpio line manes Gireesh.Hiremath
2022-03-25 10:06 ` [PATCH 15/15] ARM: dts: am335x: Guardian: Update comments Gireesh.Hiremath
2022-04-21 11:08 ` [PATCH 00/15] am335x, guardian: update board specific dts changes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220325100613.1494-14-Gireesh.Hiremath@in.bosch.com \
--to=gireesh.hiremath@in.bosch.com \
--cc=Govindaraji.Sivanantham@in.bosch.com \
--cc=VinayKumar.Shettar@in.bosch.com \
--cc=anaclaudia.dias@de.bosch.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®