[PATCH v2] mips: dts: ingenic: x1000: Add PWM device tree node

[PATCH v2] mips: dts: ingenic: x1000: Add PWM device tree node

[Aidan MacDonald]

Copied from the jz4740 devicetree and trimmed to 5 timers, which
is what the hardware supports.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
v2: Reduce regmap length since only the first 5 timers need to be accessed,
    and don't wrap the clock-names at 80 columns.

 arch/mips/boot/dts/ingenic/x1000.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 8bd27edef216..c2cdbf947264 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -127,6 +127,18 @@ wdt: watchdog@0 {
 			clocks = <&tcu TCU_CLK_WDT>;
 			clock-names = "wdt";
 		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,x1000-pwm";
+			reg = <0x40 0x50>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>;
+			clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
+		};
 	};
 
 	rtc: rtc@10003000 {
-- 
2.35.1

Re: [PATCH v2] mips: dts: ingenic: x1000: Add PWM device tree node

[Zhou Yanjie]

Hi Aidan,

On 2022/4/11 下午11:53, Aidan MacDonald wrote:
> Copied from the jz4740 devicetree and trimmed to 5 timers, which
> is what the hardware supports.
>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>


Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>


> ---
> v2: Reduce regmap length since only the first 5 timers need to be accessed,
>      and don't wrap the clock-names at 80 columns.
>
>   arch/mips/boot/dts/ingenic/x1000.dtsi | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
>
> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
> index 8bd27edef216..c2cdbf947264 100644
> --- a/arch/mips/boot/dts/ingenic/x1000.dtsi
> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
> @@ -127,6 +127,18 @@ wdt: watchdog@0 {
>   			clocks = <&tcu TCU_CLK_WDT>;
>   			clock-names = "wdt";
>   		};
> +
> +		pwm: pwm@40 {
> +			compatible = "ingenic,x1000-pwm";
> +			reg = <0x40 0x50>;
> +
> +			#pwm-cells = <3>;
> +
> +			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
> +				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
> +				 <&tcu TCU_CLK_TIMER4>;
> +			clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
> +		};
>   	};
>   
>   	rtc: rtc@10003000 {

Re: [PATCH v2] mips: dts: ingenic: x1000: Add PWM device tree node

[Thomas Bogendoerfer]

On Mon, Apr 11, 2022 at 04:53:15PM +0100, Aidan MacDonald wrote:
> Copied from the jz4740 devicetree and trimmed to 5 timers, which
> is what the hardware supports.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
> v2: Reduce regmap length since only the first 5 timers need to be accessed,
>     and don't wrap the clock-names at 80 columns.
> 
>  arch/mips/boot/dts/ingenic/x1000.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]