[PATCH 3/6] regulator: core: Add error flags to sysfs attributes

[Zev Weiss <zev@bewilderbeest.net>]

If a regulator provides a get_error_flags() operation, its sysfs
attributes will now include an entry for each defined
REGULATOR_ERROR_* flag.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---
 .../ABI/testing/sysfs-class-regulator         | 81 +++++++++++++++++++
 drivers/regulator/core.c                      | 45 +++++++++++
 2 files changed, 126 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
index 8516f08806dd..475b9a372657 100644
--- a/Documentation/ABI/testing/sysfs-class-regulator
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -370,3 +370,84 @@ Description:
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
+
+What:		/sys/class/regulator/.../under_voltage
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage.  This indicates if the device reports an
+		under-voltage fault (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current.  This indicates if the device reports an
+		over-current fault (1) or not (0).
+
+What:		/sys/class/regulator/.../regulation_out
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		regulation_out.  This indicates if the device reports an
+		out-of-regulation fault (1) or not (0).
+
+What:		/sys/class/regulator/.../fail
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		fail.  This indicates if the device reports an output failure
+		(1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp.  This indicates if the device reports an
+		over-temperature fault (1) or not (0).
+
+What:		/sys/class/regulator/.../under_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage_warn.  This indicates if the device reports an
+		under-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current_warn.  This indicates if the device reports an
+		over-current warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_voltage_warn.  This indicates if the device reports an
+		over-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp_warn.  This indicates if the device reports an
+		over-temperature warning (1) or not (0).
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d2553970a67b..9094bd8772e5 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -83,6 +83,7 @@ struct regulator_supply_alias {
 
 static int _regulator_is_enabled(struct regulator_dev *rdev);
 static int _regulator_disable(struct regulator *regulator);
+static int _regulator_get_error_flags(struct regulator_dev *rdev, unsigned int *flags);
 static int _regulator_get_current_limit(struct regulator_dev *rdev);
 static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
 static int _notifier_call_chain(struct regulator_dev *rdev,
@@ -911,6 +912,30 @@ static ssize_t bypass_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(bypass);
 
+#define REGULATOR_ERROR_ATTR(name, bit)							\
+	static ssize_t name##_show(struct device *dev, struct device_attribute *attr,	\
+				   char *buf)						\
+	{										\
+		int ret;								\
+		unsigned int flags;							\
+		struct regulator_dev *rdev = dev_get_drvdata(dev);			\
+		ret = _regulator_get_error_flags(rdev, &flags);				\
+		if (ret)								\
+			return ret;							\
+		return sysfs_emit(buf, "%d\n", !!(flags & (bit)));			\
+	}										\
+	static DEVICE_ATTR_RO(name)
+
+REGULATOR_ERROR_ATTR(under_voltage, REGULATOR_ERROR_UNDER_VOLTAGE);
+REGULATOR_ERROR_ATTR(over_current, REGULATOR_ERROR_OVER_CURRENT);
+REGULATOR_ERROR_ATTR(regulation_out, REGULATOR_ERROR_REGULATION_OUT);
+REGULATOR_ERROR_ATTR(fail, REGULATOR_ERROR_FAIL);
+REGULATOR_ERROR_ATTR(over_temp, REGULATOR_ERROR_OVER_TEMP);
+REGULATOR_ERROR_ATTR(under_voltage_warn, REGULATOR_ERROR_UNDER_VOLTAGE_WARN);
+REGULATOR_ERROR_ATTR(over_current_warn, REGULATOR_ERROR_OVER_CURRENT_WARN);
+REGULATOR_ERROR_ATTR(over_voltage_warn, REGULATOR_ERROR_OVER_VOLTAGE_WARN);
+REGULATOR_ERROR_ATTR(over_temp_warn, REGULATOR_ERROR_OVER_TEMP_WARN);
+
 /* Calculate the new optimum regulator operating mode based on the new total
  * consumer load. All locks held by caller
  */
@@ -4971,6 +4996,15 @@ static struct attribute *regulator_dev_attrs[] = {
 	&dev_attr_max_microvolts.attr,
 	&dev_attr_min_microamps.attr,
 	&dev_attr_max_microamps.attr,
+	&dev_attr_under_voltage.attr,
+	&dev_attr_over_current.attr,
+	&dev_attr_regulation_out.attr,
+	&dev_attr_fail.attr,
+	&dev_attr_over_temp.attr,
+	&dev_attr_under_voltage_warn.attr,
+	&dev_attr_over_current_warn.attr,
+	&dev_attr_over_voltage_warn.attr,
+	&dev_attr_over_temp_warn.attr,
 	&dev_attr_suspend_standby_state.attr,
 	&dev_attr_suspend_mem_state.attr,
 	&dev_attr_suspend_disk_state.attr,
@@ -5026,6 +5060,17 @@ static umode_t regulator_attr_is_visible(struct kobject *kobj,
 	if (attr == &dev_attr_bypass.attr)
 		return ops->get_bypass ? mode : 0;
 
+	if (attr == &dev_attr_under_voltage.attr ||
+	    attr == &dev_attr_over_current.attr ||
+	    attr == &dev_attr_regulation_out.attr ||
+	    attr == &dev_attr_fail.attr ||
+	    attr == &dev_attr_over_temp.attr ||
+	    attr == &dev_attr_under_voltage_warn.attr ||
+	    attr == &dev_attr_over_current_warn.attr ||
+	    attr == &dev_attr_over_voltage_warn.attr ||
+	    attr == &dev_attr_over_temp_warn.attr)
+		return ops->get_error_flags ? mode : 0;
+
 	/* constraints need specific supporting methods */
 	if (attr == &dev_attr_min_microvolts.attr ||
 	    attr == &dev_attr_max_microvolts.attr)
-- 
2.36.0