From: Zev Weiss <zev@bewilderbeest.net>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Zev Weiss <zev@bewilderbeest.net>,
linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
openbmc@lists.ozlabs.org
Subject: [PATCH 6/6] regulator: core: Add external-consumer driver
Date: Tue, 3 May 2022 23:52:52 -0700 [thread overview]
Message-ID: <20220504065252.6955-6-zev@bewilderbeest.net> (raw)
In-Reply-To: <20220504065252.6955-1-zev@bewilderbeest.net>
An external consumer is a dummy device representing a device external
to the system that is supplied by a regulator designated for external
output. It is purely a virtual placeholder to instantiate a regulator
by calling regulator_get() on it from its probe function.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---
drivers/regulator/Kconfig | 9 +++++++++
drivers/regulator/core.c | 28 ++++++++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5ef2306fce04..5ec390687a81 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -56,6 +56,15 @@ config REGULATOR_USERSPACE_CONSUMER
If unsure, say no.
+config REGULATOR_EXTERNAL_CONSUMER
+ bool "External regulator consumer support"
+ help
+ Some regulators supply devices that are entirely external to
+ the system. This driver provides a placeholder consumer
+ representing such devices.
+
+ If unsure, say no.
+
config REGULATOR_88PG86X
tristate "Marvell 88PG86X voltage regulators"
depends on I2C
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d873606eb41f..4f348b3d5290 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/consumer.h>
@@ -6070,6 +6071,33 @@ static int regulator_summary_show(struct seq_file *s, void *data)
DEFINE_SHOW_ATTRIBUTE(regulator_summary);
#endif /* CONFIG_DEBUG_FS */
+#ifdef CONFIG_REGULATOR_EXTERNAL_CONSUMER
+static int regulator_external_output_probe(struct platform_device *pdev)
+{
+ struct regulator *reg;
+
+ reg = devm_regulator_get_external(&pdev->dev, "vout");
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ return 0;
+}
+
+static const struct of_device_id reg_external_consumer_of_match_table[] = {
+ { .compatible = "regulator-external-output" },
+ { },
+};
+
+static struct platform_driver reg_external_consumer_driver = {
+ .driver = {
+ .name = "reg-external-consumer",
+ .of_match_table = reg_external_consumer_of_match_table,
+ },
+ .probe = regulator_external_output_probe,
+};
+builtin_platform_driver(reg_external_consumer_driver);
+#endif /* CONFIG_REGULATOR_EXTERNAL_CONSUMER */
+
static int __init regulator_init(void)
{
int ret;
--
2.36.0
next prev parent reply other threads:[~2022-05-04 6:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-04 6:52 [PATCH 1/6] dt-bindings: regulator: Add regulator-external-output property Zev Weiss
2022-05-04 6:52 ` [PATCH 2/6] dt-bindings: regulator: Add reg-external-output binding Zev Weiss
2022-05-04 12:55 ` Mark Brown
2022-05-04 20:33 ` Zev Weiss
2022-05-04 20:49 ` Mark Brown
2022-05-04 21:35 ` Zev Weiss
2022-05-05 12:05 ` Mark Brown
2022-05-05 8:33 ` Krzysztof Kozlowski
2022-05-04 6:52 ` [PATCH 3/6] regulator: core: Add error flags to sysfs attributes Zev Weiss
2022-05-04 6:52 ` [PATCH 4/6] regulator: core: Add external-output support Zev Weiss
2022-05-04 13:06 ` Mark Brown
2022-05-04 6:52 ` [PATCH 5/6] regulator: core: Add external get type Zev Weiss
2022-05-04 6:52 ` Zev Weiss [this message]
2022-05-04 12:36 ` [PATCH 1/6] dt-bindings: regulator: Add regulator-external-output property Mark Brown
2022-05-04 20:54 ` (subset) " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220504065252.6955-6-zev@bewilderbeest.net \
--to=zev@bewilderbeest.net \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®