From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Mark Brown <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 11/26] ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly
Date: Mon, 9 May 2022 22:46:48 +0100 [thread overview]
Message-ID: <20220509214703.4482-12-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20220509214703.4482-1-vitalyr@opensource.cirrus.com>
From: Stefan Binding <sbinding@opensource.cirrus.com>
DSP controls are exposed as ALSA controls, however,
some of these controls are required to be accessed by
the driver. Add apis which allow read/write of these
controls. The write api will also notify the ALSA control
on value change.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---
sound/pci/hda/hda_cs_dsp_ctl.c | 52 ++++++++++++++++++++++++++++++++++
sound/pci/hda/hda_cs_dsp_ctl.h | 4 +++
2 files changed, 56 insertions(+)
diff --git a/sound/pci/hda/hda_cs_dsp_ctl.c b/sound/pci/hda/hda_cs_dsp_ctl.c
index e94740c5557a..4b4446043356 100644
--- a/sound/pci/hda/hda_cs_dsp_ctl.c
+++ b/sound/pci/hda/hda_cs_dsp_ctl.c
@@ -359,6 +359,58 @@ void hda_cs_dsp_control_remove(struct cs_dsp_coeff_ctl *cs_ctl)
}
EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_control_remove, SND_HDA_CS_DSP_CONTROLS);
+int hda_cs_dsp_write_ctl(struct cs_dsp *dsp, const char *name, int type,
+ unsigned int alg, void *buf, size_t len)
+{
+ struct cs_dsp_coeff_ctl *cs_ctl;
+ struct hda_cs_dsp_coeff_ctl *ctl;
+ struct snd_kcontrol *kctl;
+ int ret;
+
+ cs_ctl = cs_dsp_get_ctl(dsp, name, type, alg);
+ if (!cs_ctl)
+ return -EINVAL;
+
+ ctl = cs_ctl->priv;
+
+ if (len > cs_ctl->len)
+ return -EINVAL;
+
+ ret = cs_dsp_coeff_write_ctrl(cs_ctl, 0, buf, len);
+ if (ret)
+ return ret;
+
+ if (cs_ctl->flags & WMFW_CTL_FLAG_SYS)
+ return 0;
+
+ list_for_each_entry(kctl, &ctl->card->controls, list)
+ if (!strncmp(kctl->id.name, ctl->name, sizeof(kctl->id.name))) {
+ snd_ctl_notify(ctl->card, SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id);
+ return 0;
+ }
+
+ dev_warn(dsp->dev, "Cannot find Control for %s\n", name);
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_write_ctl, SND_HDA_CS_DSP_CONTROLS);
+
+int hda_cs_dsp_read_ctl(struct cs_dsp *dsp, const char *name, int type,
+ unsigned int alg, void *buf, size_t len)
+{
+ struct cs_dsp_coeff_ctl *cs_ctl;
+
+ cs_ctl = cs_dsp_get_ctl(dsp, name, type, alg);
+ if (!cs_ctl)
+ return -EINVAL;
+
+ if (len > cs_ctl->len)
+ return -EINVAL;
+
+ return cs_dsp_coeff_read_ctrl(cs_ctl, 0, buf, len);
+}
+EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_read_ctl, SND_HDA_CS_DSP_CONTROLS);
+
MODULE_DESCRIPTION("CS_DSP ALSA Control HDA Library");
MODULE_AUTHOR("Stefan Binding, <sbinding@opensource.cirrus.com>");
MODULE_LICENSE("GPL");
diff --git a/sound/pci/hda/hda_cs_dsp_ctl.h b/sound/pci/hda/hda_cs_dsp_ctl.h
index 3c90312b45d6..65b9c5c68957 100644
--- a/sound/pci/hda/hda_cs_dsp_ctl.h
+++ b/sound/pci/hda/hda_cs_dsp_ctl.h
@@ -30,5 +30,9 @@ struct hda_cs_dsp_ctl_info {
int hda_cs_dsp_control_add(struct cs_dsp_coeff_ctl *cs_ctl, struct hda_cs_dsp_ctl_info *info);
void hda_cs_dsp_control_remove(struct cs_dsp_coeff_ctl *cs_ctl);
int hda_cs_dsp_remove_kcontrol(struct snd_card *card, const char *name);
+int hda_cs_dsp_write_ctl(struct cs_dsp *dsp, const char *name, int type,
+ unsigned int alg, void *buf, size_t len);
+int hda_cs_dsp_read_ctl(struct cs_dsp *dsp, const char *name, int type,
+ unsigned int alg, void *buf, size_t len);
#endif /*__HDA_CS_DSP_CTL_H__*/
--
2.34.1
next prev parent reply other threads:[~2022-05-09 21:50 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-09 21:46 [PATCH v2 00/26] *ALSA: hda: cirrus: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 01/26] ALSA: hda: cs35l41: Fix error in spi cs35l41 hda driver name Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 02/26] ALSA: hda: cs35l41: Set Speaker Position for CLSA0100 Laptop Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 03/26] ALSA: hda: cs35l41: Remove Set Channel Map api from binding Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 04/26] ALSA: hda: cs35l41: Add Support for Interrupts Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 05/26] ALSA: hda: cs35l41: Enable GPIO2 Interrupt for CLSA0100 laptops Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 06/26] ASoC: cs35l41: Move cs35l41_set_cspl_mbox_cmd to shared code Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 07/26] ASoC: cs35l41: Move cs35l41 fs errata into " Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 08/26] ASoC: cs35l41: Move cs_dsp config struct " Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 09/26] ALSA: hda: cs35l41: Add Amp Name based on channel and index Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 10/26] ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls Vitaly Rodionov
2022-05-11 13:49 ` Takashi Iwai
2022-05-11 13:57 ` Charles Keepax
2022-05-11 14:02 ` Charles Keepax
2022-05-09 21:46 ` Vitaly Rodionov [this message]
2022-05-09 21:46 ` [PATCH v2 12/26] ALSA: hda: cs35l41: Save codec object inside component struct Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 13/26] ALSA: hda: cs35l41: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 14/26] ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 15/26] ALSA: hda: cs35l41: Support reading subsystem id from ACPI Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 16/26] ALSA: hda: cs35l41: Support multiple load paths for firmware Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 17/26] ALSA: hda: cs35l41: Support Speaker ID for laptops Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 18/26] ASoC: cs35l41: Move cs35l41 exit hibernate function into shared code Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 19/26] ASoC: cs35l41: Do not print error when waking from hibernation Vitaly Rodionov
2022-05-10 8:54 ` Charles Keepax
2022-05-09 21:46 ` [PATCH v2 20/26] ASoC: cs35l41: Add common cs35l41 enter hibernate function Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 21/26] ALSA: hda: cs35l41: Support Hibernation during Suspend Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 22/26] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables Vitaly Rodionov
2022-05-11 13:57 ` Takashi Iwai
2022-05-09 21:47 ` [PATCH v2 23/26] ALSA: hda: hda_cs_dsp_ctl: Add fw id strings Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 24/26] ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 25/26] ALSA: hda: cs35l41: Support Firmware switching and reloading Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 26/26] ALSA: hda: cs35l41: Add kernel config to disable firmware autoload Vitaly Rodionov
2022-05-11 13:59 ` Takashi Iwai
2022-05-16 7:58 ` [PATCH v2 00/26] *ALSA: hda: cirrus: Add initial DSP support and firmware loading Takashi Iwai
2022-06-07 10:54 ` (subset) " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220509214703.4482-12-vitalyr@opensource.cirrus.com \
--to=vitalyr@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®