mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Mark Brown <broonie@kernel.org>, <alsa-devel@alsa-project.org>,
	<patches@opensource.cirrus.com>, <linux-kernel@vger.kernel.org>,
	Stefan Binding <sbinding@opensource.cirrus.com>
Subject: Re: [PATCH v2 22/26] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables
Date: Wed, 11 May 2022 15:57:24 +0200	[thread overview]
Message-ID: <s5hy1z8f9yz.wl-tiwai@suse.de> (raw)
In-Reply-To: <20220509214703.4482-23-vitalyr@opensource.cirrus.com>

On Mon, 09 May 2022 23:46:59 +0200,
Vitaly Rodionov wrote:
> 
> From: Stefan Binding <sbinding@opensource.cirrus.com>
> 
> Speaker Calibration data, specific to an individual speaker is
> stored inside UEFI variables during calibration, and can be
> used by the DSP.

Does this build without CONFIG_EFI?


thanks,

Takashi

> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
> ---
>  sound/pci/hda/cs35l41_hda.c | 57 +++++++++++++++++++++++++++++++++++++
>  sound/pci/hda/cs35l41_hda.h | 15 ++++++++++
>  2 files changed, 72 insertions(+)
> 
> diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
> index 9c622104bf01..7e87b355b369 100644
> --- a/sound/pci/hda/cs35l41_hda.c
> +++ b/sound/pci/hda/cs35l41_hda.c
> @@ -22,10 +22,18 @@
>  #define CS35L41_FIRMWARE_ROOT "cirrus/"
>  #define CS35L41_PART "cs35l41"
>  #define FW_NAME "CSPL"
> +#define CIRRUS_EFI_GUID \
> +	EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3)
>  
>  #define HALO_STATE_DSP_CTL_NAME		"HALO_STATE"
>  #define HALO_STATE_DSP_CTL_TYPE		5
>  #define HALO_STATE_DSP_CTL_ALG		262308
> +#define CAL_R_DSP_CTL_NAME		"CAL_R"
> +#define CAL_R_DSP_CTL_TYPE		5
> +#define CAL_R_DSP_CTL_ALG		205
> +
> +static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
> +static efi_guid_t efi_guid = CIRRUS_EFI_GUID;
>  
>  static const struct reg_sequence cs35l41_hda_config[] = {
>  	{ CS35L41_PLL_CLK_CTRL,		0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
> @@ -282,6 +290,50 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41,
>  	return ret;
>  }
>  
> +static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41)
> +{
> +	const struct cs35l41_amp_efi_data *efi_data;
> +	const struct cs35l41_amp_cal_data *cl;
> +	unsigned long data_size = 0;
> +	efi_status_t status;
> +	int ret = 0;
> +	u8 *data = NULL;
> +	u32 attr;
> +	u32 r0;
> +
> +	/* Get real size of UEFI variable */
> +	status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
> +	if (status == EFI_BUFFER_TOO_SMALL) {
> +		ret = -ENODEV;
> +		/* Allocate data buffer of data_size bytes */
> +		data = vmalloc(data_size);
> +		if (!data)
> +			return -ENOMEM;
> +		/* Get variable contents into buffer */
> +		status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
> +		if (status == EFI_SUCCESS) {
> +			efi_data = (struct cs35l41_amp_efi_data *)data;
> +			dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
> +				efi_data->size, efi_data->count);
> +			if (efi_data->count > cs35l41->index) {
> +				cl = &efi_data->data[cs35l41->index];
> +				dev_dbg(cs35l41->dev,
> +					"Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
> +					cl->calAmbient, cl->calStatus, cl->calR);
> +				r0 = cpu_to_be32(cl->calR);
> +				ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME,
> +							   CAL_R_DSP_CTL_TYPE, CAL_R_DSP_CTL_ALG,
> +							   &r0, 4);
> +				if (ret)
> +					dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n",
> +						CAL_R_DSP_CTL_NAME, ret);
> +			}
> +		}
> +		vfree(data);
> +	}
> +	return ret;
> +}
> +
>  static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
>  {
>  	const struct firmware *coeff_firmware = NULL;
> @@ -314,7 +366,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
>  
>  	ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename,
>  			      FW_NAME);
> +	if (ret)
> +		goto err_release;
> +
> +	ret = cs35l41_apply_calibration(cs35l41);
>  
> +err_release:
>  	if (wmfw_firmware)
>  		release_firmware(wmfw_firmware);
>  	if (coeff_firmware)
> diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
> index 54521a013e78..3cf9871fbed2 100644
> --- a/sound/pci/hda/cs35l41_hda.h
> +++ b/sound/pci/hda/cs35l41_hda.h
> @@ -10,6 +10,7 @@
>  #ifndef __CS35L41_HDA_H__
>  #define __CS35L41_HDA_H__
>  
> +#include <linux/efi.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/device.h>
> @@ -18,6 +19,20 @@
>  #include <linux/firmware/cirrus/cs_dsp.h>
>  #include <linux/firmware/cirrus/wmfw.h>
>  
> +struct cs35l41_amp_cal_data {
> +	u32 calTarget[2];
> +	u32 calTime[2];
> +	s8 calAmbient;
> +	u8 calStatus;
> +	u16 calR;
> +} __packed;
> +
> +struct cs35l41_amp_efi_data {
> +	u32 size;
> +	u32 count;
> +	struct cs35l41_amp_cal_data data[];
> +} __packed;
> +
>  enum cs35l41_hda_spk_pos {
>  	CS35l41_LEFT,
>  	CS35l41_RIGHT,
> -- 
> 2.34.1
> 

  reply	other threads:[~2022-05-11 13:57 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-09 21:46 [PATCH v2 00/26] *ALSA: hda: cirrus: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 01/26] ALSA: hda: cs35l41: Fix error in spi cs35l41 hda driver name Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 02/26] ALSA: hda: cs35l41: Set Speaker Position for CLSA0100 Laptop Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 03/26] ALSA: hda: cs35l41: Remove Set Channel Map api from binding Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 04/26] ALSA: hda: cs35l41: Add Support for Interrupts Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 05/26] ALSA: hda: cs35l41: Enable GPIO2 Interrupt for CLSA0100 laptops Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 06/26] ASoC: cs35l41: Move cs35l41_set_cspl_mbox_cmd to shared code Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 07/26] ASoC: cs35l41: Move cs35l41 fs errata into " Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 08/26] ASoC: cs35l41: Move cs_dsp config struct " Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 09/26] ALSA: hda: cs35l41: Add Amp Name based on channel and index Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 10/26] ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls Vitaly Rodionov
2022-05-11 13:49   ` Takashi Iwai
2022-05-11 13:57     ` Charles Keepax
2022-05-11 14:02   ` Charles Keepax
2022-05-09 21:46 ` [PATCH v2 11/26] ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 12/26] ALSA: hda: cs35l41: Save codec object inside component struct Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 13/26] ALSA: hda: cs35l41: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 14/26] ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 15/26] ALSA: hda: cs35l41: Support reading subsystem id from ACPI Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 16/26] ALSA: hda: cs35l41: Support multiple load paths for firmware Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 17/26] ALSA: hda: cs35l41: Support Speaker ID for laptops Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 18/26] ASoC: cs35l41: Move cs35l41 exit hibernate function into shared code Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 19/26] ASoC: cs35l41: Do not print error when waking from hibernation Vitaly Rodionov
2022-05-10  8:54   ` Charles Keepax
2022-05-09 21:46 ` [PATCH v2 20/26] ASoC: cs35l41: Add common cs35l41 enter hibernate function Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 21/26] ALSA: hda: cs35l41: Support Hibernation during Suspend Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 22/26] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables Vitaly Rodionov
2022-05-11 13:57   ` Takashi Iwai [this message]
2022-05-09 21:47 ` [PATCH v2 23/26] ALSA: hda: hda_cs_dsp_ctl: Add fw id strings Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 24/26] ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 25/26] ALSA: hda: cs35l41: Support Firmware switching and reloading Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 26/26] ALSA: hda: cs35l41: Add kernel config to disable firmware autoload Vitaly Rodionov
2022-05-11 13:59   ` Takashi Iwai
2022-05-16  7:58 ` [PATCH v2 00/26] *ALSA: hda: cirrus: Add initial DSP support and firmware loading Takashi Iwai
2022-06-07 10:54 ` (subset) " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hy1z8f9yz.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=sbinding@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    --cc=vitalyr@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®