[PATCH v2 1/2] remoteproc: qcom: wcnss: Fix handling of IRQs

[PATCH v2 1/2] remoteproc: qcom: wcnss: Fix handling of IRQs

[Sireesh Kodali]

The wcnss_get_irq function is expected to return a value > 0 in the
event that an IRQ is succssfully obtained, but it instead returns 0.
This causes the stop and ready IRQs to never actually be used despite
being defined in the device-tree. This patch fixes that.

Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 drivers/remoteproc/qcom_wcnss.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 9a223d394087..68f37296b151 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -467,6 +467,7 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,
 			     irq_handler_t thread_fn)
 {
 	int ret;
+	int irq_number;
 
 	ret = platform_get_irq_byname(pdev, name);
 	if (ret < 0 && optional) {
@@ -477,14 +478,19 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,
 		return ret;
 	}
 
+	irq_number = ret;
+
 	ret = devm_request_threaded_irq(&pdev->dev, ret,
 					NULL, thread_fn,
 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 					"wcnss", wcnss);
-	if (ret)
+	if (ret) {
 		dev_err(&pdev->dev, "request %s IRQ failed\n", name);
+		return ret;
+	}
 
-	return ret;
+	/* Return the IRQ number if the IRQ was successfully acquired */
+	return irq_number;
 }
 
 static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
-- 
2.36.1

[PATCH v2 2/2] arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node

[Sireesh Kodali]

The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.

Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e34963505e07..7ecd747dc624 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1758,8 +1758,8 @@ pronto: remoteproc@a21b000 {
 					<&rpmpd MSM8916_VDDMX>;
 			power-domain-names = "cx", "mx";
 
-			qcom,state = <&wcnss_smp2p_out 0>;
-			qcom,state-names = "stop";
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&wcnss_pin_a>;
-- 
2.36.1

Re: [PATCH v2 2/2] arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node

[Stephan Gerhold]

On Thu, May 26, 2022 at 07:47:40PM +0530, Sireesh Kodali wrote:
> The smem-state properties for the pronto node were incorrectly labelled,
> reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
> the stop state to be used.
> 
> Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>

My review didn't change just because of an unneeded blank line between
the tags. Thanks again for finding this. :)

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index e34963505e07..7ecd747dc624 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1758,8 +1758,8 @@ pronto: remoteproc@a21b000 {
>  					<&rpmpd MSM8916_VDDMX>;
>  			power-domain-names = "cx", "mx";
>  
> -			qcom,state = <&wcnss_smp2p_out 0>;
> -			qcom,state-names = "stop";
> +			qcom,smem-states = <&wcnss_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
>  
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&wcnss_pin_a>;
> -- 
> 2.36.1
> 

Re: [PATCH v2 2/2] arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node

[Krzysztof Kozlowski]

On 26/05/2022 16:17, Sireesh Kodali wrote:
> The smem-state properties for the pronto node were incorrectly labelled,
> reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
> the stop state to be used.
> 
> Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>

Include please acquired tags when sending a new version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: (subset) [PATCH v2 2/2] arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node

[Bjorn Andersson]

On Thu, 26 May 2022 19:47:40 +0530, Sireesh Kodali wrote:
> The smem-state properties for the pronto node were incorrectly labelled,
> reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
> the stop state to be used.
> 
> 

Applied, thanks!

[2/2] arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node
      commit: 5458d6f2827cd30218570f266b8d238417461f2f

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>